Skip to the content

ADS8588SIPM

Texas InstrumentsExtended

-40℃~+125℃ 0.45LSB 16 200kHz 4.75V~5.25V 5V、10V 7.5ppm/℃ 8 96.4dB Built-in SAR Serial port、Parallel port LQFP-64(10x10) Analog to Digital Converters (ADC) ROHS

Part id
ti/ADS8588SIPM
Category
Analog To Digital Converters (ADC)
Package
LQFP-64(10x10)
Pins
64
In stock
80 at JLCPCB (C1543171)
Used on
3 open-source boards

Overview

The ADS8588SIPM is an analog To Digital Converter made by Texas Instruments in a LQFP-64(10x10) package with 64 pins. -40℃~+125℃ 0.45LSB 16 200kHz 4.75V~5.25V 5V、10V 7.5ppm/℃ 8 96.4dB Built-in SAR Serial port、Parallel port LQFP-64(10x10) Analog to Digital Converters (ADC) ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:ADS8588SIPMR, from EasyEDA) and its footprint (Package_QFP:LQFP-64_10x10mm_P0.5mm, from KiCad's library), ready for a KiCad board. 80 are in stock at JLCPCB (part C1543171). 3 open-source boards in 1 repository on GitHub use it.

Symbol

1AVDD2AGND3OS04OS15OS26#PAR/SER/BYTE_SEL7#STBY8RANGE9CONVSTA10CONVSTB11RESET12#RD/SCLK13#CS14BUSY15FRSTDATA16DB017DB118DB219DB320DB421DB522DB623DVDD24DB7/DOUTA25DB8/DOUTB26AGND27DB928DB1029DB1130DB1231DB1332DB14/HBEN33DB15/BYTE_SEL34REFSEL35AGND36REGCAP137AVDD38AVDD39REGCAP240AGND41AGND42REFIN/REFOUT43REFGND44REFCAPA45REFCAPB46REFGND47AGND48AVDD49AIN_1P50AIN_1GND51AIN_2P52AIN_2GND53AIN_3P54AIN_3GND55AIN_4P56AIN_4GND57AIN_5P58AIN_5GND59AIN_6P60AIN_6GND61AIN_7P62AIN_7GND63AIN_8P64AIN_8GND
EasyEDA_Cloud:ADS8588SIPMRFrom EasyEDA

Footprint

Package_QFP:LQFP-64_10x10mm_P0.5mmFrom KiCad's library

From the datasheet

13
Supply, least
4.75 V · AVDD, recommended operating min · p. 7
Supply, most
5.25 V · AVDD, recommended operating max · p. 7
Supply, least
2.3 V · DVDD, recommended operating min · p. 7
Supply, absolute maximum
7 V · AVDD to AGND, absolute max · p. 6
Works from
-40 °C · Operating free-air temperature min · p. 10
Works up to
125 °C · Operating free-air temperature max · p. 10
Junction, hottest
150 °C · Junction temperature absolute max · p. 6
Takes working
17.85 mA · sum of AVDD and DVDD typical operational currents, internal reference, 200 kSPS · p. 10
Takes at most
24.3 mA · sum of AVDD and DVDD max operational currents, 200 kSPS · p. 10
Takes asleep
250 nA · sum of AVDD and DVDD typical power-down currents, −40°C to +85°C · p. 10
Junction to air (PM (LQFP))
46 K/W · Junction-to-ambient thermal resistance · p. 7
Junction to case (PM (LQFP))
7.8 K/W · Junction-to-case top thermal resistance · p. 7
Junction to board (PM (LQFP))
20.1 K/W · Junction-to-board thermal resistance · p. 7

What it is and has

10
ADC
16-bit with integrated analog front-end · p. 1
Simultaneous sampling
8 channels · p. 1
Input ranges
Pin-programmable ±10 V and ±5 V · p. 1
Input impedance
1 MΩ · p. 1
Protection
Overvoltage input clamp with 7-kV ESD · p. 1
Reference
Low-drift on-chip 2.5 V reference and buffer · p. 1
Maximum throughput
200 kSPS on all channels · p. 1
Digital filter
On-chip filter for oversampling · p. 1
Interface
Parallel, byte, and serial · p. 1
Package
64-pin LQFP · p. 1

Around it

11
cap 10-µF
between REFCAPA/REFCAPB and AGND; Short REFCAPA to REFCAPB; use a low ESR ceramic capacitor. · p. 6
cap 10-µF
between REFIN/REFOUT and REFGND; Connect to REFGND on pin 43; X7R-grade, 0603-size ceramic recommended for optimum performance. · p. 6
cap 1-µF
between REGCAP1 and AGND; Decouple separately. · p. 6
cap 1-µF
between REGCAP2 and AGND; Decouple separately. · p. 6
cap 10 µF (minimum)
between REFCAPA/REFCAPB and REFGND; Ceramic; short REFCAPA (pin 45) and REFCAPB (pin 44) together externally and connect the capacitor from that node to REFGND (pin 43). · p. 29
cap 10-μF (minimum)
between REFIN/REFOUT and REFGND; Decoupling capacitor for internal reference operation; place as close to REFIN/REFOUT as possible. · p. 29
cap 1-µF
between AVDD and AGND; One capacitor at each of the four AVDD pins, placed as close as possible. · p. 51
cap 1-µF (minimum 100-nF)
between DVDD and GND; Place close to DVDD to provide digital switching current. · p. 51
cap 10-μF
between REFCAPA/REFCAPB and REFGND; Short REFCAPA and REFCAPB together. Use an X7R-grade, 0603-size ceramic capacitor close to the pins, without intervening vias. · p. 52
cap 10-μF
between REFIN/REFOUT and REFGND; X7R-grade, 0603-size ceramic capacitor when using the internal reference. Place close to the pin without intervening vias. · p. 52
cap 1-μF
between REGCAP1 and GND; Separate X7R-grade, 0603-size ceramic capacitor on this pin. · p. 52

Specifications

155
ParameterConditionsAs printedPage
AVDD to AGNDTA = 25°Cmin -0.3 · max 7 V6
DVDD to DGNDTA = 25°Cmin -0.3 · max 7 V6
AGND to DGNDTA = 25°Cmin -0.3 · max 0.3 V6
Analog input voltage to AGND (2)TA = 25°Cmin -15 · max 15 V6
Digital input to DGNDTA = 25°C; maximum = DVDD + 0.3 Vmin -0.3 V6
REFIN to AGNDTA = 25°C; maximum = AVDD + 0.3 Vmin -0.3 V6
Input current to any pin except supplies (2)TA = 25°Cmin -10 · max 10 mA6
TemperatureOperatingmin -40 · max 125 °C6
Temperature TJJunctionmax 150 °C6
Temperature TstgStoragemin -65 · max 150 °C6
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; all pins except analog inputs; rating ±2000 Vmax 2000 V7
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; analog input pins only; rating ±7000 Vmax 7000 V7
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22-C101; all pins; rating ±500 Vmax 500 V7
Analog supply voltage AVDDOver operating free-air temperature range; nominal 5 Vmin 4.75 · typ 5 · max 5.25 V7
Digital supply voltage DVDDOver operating free-air temperature range; nominal 3.3 V; maximum = AVDDmin 2.3 · typ 3.3 V7
Junction-to-ambient thermal resistance RθJAADS8588S, PM (LQFP), 64 pinstyp 46 °C/W7
Junction-to-case (top) thermal resistance RθJC(top)ADS8588S, PM (LQFP), 64 pinstyp 7.8 °C/W7
Junction-to-board thermal resistance RθJBADS8588S, PM (LQFP), 64 pinstyp 20.1 °C/W7
Junction-to-top characterization parameter ψJTADS8588S, PM (LQFP), 64 pinstyp 0.3 °C/W7
Junction-to-board characterization parameter ψJBADS8588S, PM (LQFP), 64 pinstyp 19.6 °C/W7
Full-scale input span (2) (AIN_nP to AIN_nGND)RANGE pin = 1min -10 · max 10 V8
Full-scale input span (2) (AIN_nP to AIN_nGND)RANGE pin = 0min -5 · max 5 V8
Operating input range, positive input AIN_nPRANGE pin = 1min -10 · max 10 V8
Operating input range, positive input AIN_nPRANGE pin = 0min -5 · max 5 V8
Operating input range, negative input AIN_nGNDAll input rangesmin -0.3 · typ 0 · max 0.3 V8
Input impedance RINAt TA = 25°Cmin 0.85 · typ 1 · max 1.15 MΩ8
Input impedance driftAll input ranges; typical ±7 ppm/°Cmin -25 · typ 7 · max 25 ppm/°C8
Resolutionmin 16 Bits8
No missing codes NMCmin 16 Bits8
Differential nonlinearity DNLAll input ranges; typical ±0.35 LSBmin -0.5 · typ 0.35 · max 0.5 LSB (3)8
Integral nonlinearity (4) INLAll input ranges; typical ±0.45 LSBmin -1.5 · typ 0.45 · max 1.5 LSB8
Gain error (5) EGAll input ranges, external reference, TA = –40°C to +85°C; typical ±4 LSBmin -64 · typ 4 · max 64 LSB8
Gain error (5) EGAll input ranges, external reference, TA = –40°C to +125°C; typical ±4 LSBmin -64 · typ 4 · max 96 LSB8
Gain error (5) EGAll input ranges, internal reference; typical ±4 LSBtyp 4 LSB8
Gain error matching (channel-to-channel)Input range = ±10 V, external and internal referencetyp 10 · max 60 LSB8
Gain error matching (channel-to-channel)Input range = ±5 V, external and internal referencetyp 12 · max 60 LSB8
Gain error temperature driftAll input ranges, external reference; typical ±6 ppm/°Cmin -14 · typ 6 · max 14 ppm/°C8
Gain error temperature driftAll input ranges, internal reference; typical ±10 ppm/°Ctyp 10 ppm/°C8
Offset error EOInput range = ±10 V; typical ±0.15 mVmin -1.8 · typ 0.15 · max 1.8 mV8
Offset error EOInput range = ±5 V; typical ±0.15 mVmin -1.8 · typ 0.15 · max 1.8 mV8
Offset error matching (channel-to-channel)All input rangestyp 0.3 · max 2.4 mV8
Offset error temperature driftAll input ranges; typical ±0.3 ppm/°Cmin -3 · typ 0.3 · max 3 ppm/°C8
Acquisition time tACQmin 1 us8
Maximum throughput rate per channel without latency fSAll eight channels includedmax 200 kSPS8
Signal-to-noise ratio, no oversampling (VIN – 0.5 dBFS at 1 kHz) SNRInput range = ±10 Vmin 91 · typ 92.7 dB9
Signal-to-noise ratio, no oversampling (VIN – 0.5 dBFS at 1 kHz) SNRInput range = ±5 Vmin 90.4 · typ 92.2 dB9
Signal-to-noise ratio, oversampling = 16x (VIN – 0.5 dBFS at 130 Hz) SNROSRInput range = ±10 Vmin 95.5 · typ 96.4 dB9
Signal-to-noise ratio, oversampling = 16x (VIN – 0.5 dBFS at 130 Hz) SNROSRInput range = ±5 Vmin 94.4 · typ 95.5 dB9
Total harmonic distortion (6) (VIN – 0.5 dBFS at 1 kHz) THDAll input rangestyp -114 · max -95 dB9
Signal-to-noise + distortion ratio, no oversampling (VIN – 0.5 dBFS at 1 kHz) SINADInput range = ±10 Vmin 90.7 · typ 92.7 dB9
Signal-to-noise + distortion ratio, no oversampling (VIN – 0.5 dBFS at 1 kHz) SINADInput range = ±5 Vmin 90.2 · typ 92.1 dB9
Signal-to-noise + distortion ratio, oversampling = 16x (VIN – 0.5 dBFS at 130 Hz) SINADOSRInput range = ±10 Vmin 95 · typ 96.4 dB9
Signal-to-noise + distortion ratio, oversampling = 16x (VIN – 0.5 dBFS at 130 Hz) SINADOSRInput range = ±5 Vmin 94 · typ 95.4 dB9
Spurious-free dynamic range (VIN – 0.5 dBFS at 1 kHz) SFDRAll input rangestyp -118 dB9
Crosstalk isolation (7)typ -95 dB9
Small-signal bandwidth BW(–3 dB)At TA = 25°C, input range = ±10 Vtyp 24 kHz9
Small-signal bandwidth BW(–3 dB)At TA = 25°C, input range = ±5 Vtyp 16 kHz9
Small-signal bandwidth BW(–0.1 dB)At TA = 25°C, input range = ±10 Vtyp 14 kHz9
Small-signal bandwidth BW(–0.1 dB)At TA = 25°C, input range = ±5 Vtyp 9.5 kHz9
Group delay tGROUPInput range = ±10 Vtyp 13 us9
Group delay tGROUPInput range = ±5 Vtyp 19 us9
Voltage on the REFIN/REFOUT pin (configured as output) VREF (8)REFSEL = 1; At TA = 25°Cmin 2.4975 · typ 2.5 · max 2.5025 V9
Internal reference temperature driftREFSEL = 1typ 7.5 ppm/°C9
Decoupling capacitor on REFIN/REFOUT (9) C(REFIN_ REFOUT)REFSEL = 1typ 10 uF9
Reference voltage to the ADC (on the REFCAPA, REFCAPB pin) V(REFCAP)REFSEL = 1; At TA = 25°Cmin 3.996 · typ 4 · max 4.004 V9
Reference buffer output impedanceREFSEL = 1typ 0.5 · max 1 Ω9
Reference buffer output temperature driftREFSEL = 1typ 5 ppm/°C9
Decoupling capacitor on REFCAPA, REFCAPB C(REFCAP)REFSEL = 1typ 10 uF9
Turn-on timeREFSEL = 1; C(REFCAP) = 10 uF, C(REFIN_REFOUT) = 10 uFtyp 25 ms9
External reference voltage on REFIO (configured as input) VREFIO_EXTREFSEL = 0min 2.475 · typ 2.5 · max 2.525 V9
Reference input impedanceREFSEL = 0typ 100 MΩ9
Reference input capacitanceREFSEL = 0typ 10 pF9
Analog power-supply voltage AVDDAnalog supplymin 4.75 · typ 5 · max 5.25 V10
Digital power-supply voltage DVDDDigital supply range; maximum = AVDDmin 2.3 · typ 3.3 V10
Analog supply current (operational) IAVDD_DYNADS8588S, AVDD = 5 V, fS = 200 kSPS, internal referencetyp 17.7 · max 24 mA10
Analog supply current (operational) IAVDD_DYNADS8588S, AVDD = 5 V, fS = 200 kSPS, external referencetyp 17.1 · max 24 mA10
Analog supply current (static) IAVDD_STCADS8588S, AVDD = 5 V, internal reference, device not convertingtyp 12.4 · max 17 mA10
Analog supply current (static) IAVDD_STCADS8588S, AVDD = 5 V, external reference, device not convertingtyp 12 · max 17 mA10
AVDD supply STANDBY current IAVDD_STDBYAVDD = 5 V, device in STDBY mode, internal referencetyp 4.2 · max 5.5 mA10
AVDD supply STANDBY current IAVDD_STDBYAVDD = 5 V, device in STDBY mode, external referencetyp 3.8 · max 5.5 mA10
AVDD supply power-down current IAVDD_PWR_ DNAVDD = 5 V, device in PWR_DN, internal or external reference, TA = –40°C to +85°Ctyp 0.2 · max 6 uA10
Digital supply current IDVDD_DYNADS8588S, DVDD = 3.3 V, fS = 200 kSPStyp 0.15 · max 0.3 mA10
DVDD supply STANDBY current IDVDD_STDBYAVDD = 5 V, device in STDBY modetyp 0.05 · max 1.5 uA10
DVDD supply power-down current IDVDD_PWR-DNAVDD = 5 V, device in PWR_DN modetyp 0.05 · max 1.5 uA10
Digital low input voltage logic level VILDVDD > 2.3 V; maximum = 0.3 × DVDDmin -0.3 V10
Input leakage currentDigital inputs (CMOS)typ 100 nA10
Input pin capacitanceDigital inputs (CMOS)typ 5 pF10
Digital low output voltage logic level VOLIO = 100-uA sink; maximum = 0.2 × DVDDmin 0 V10
Floating state leakage currentOnly for SDOtyp 1 uA10
Internal pin capacitanceDigital outputs (CMOS)typ 5 pF10
Operating free-air temperature TAmin -40 · max 125 °C10
Acquisition time: BUSY falling edge to rising edge of trailing CONVSTA or CONVSTB tACQmin 1 us11
CONVSTA, CONVSTB pulse high time tPH_CNmin 25 ns11
CONVSTA, CONVSTB pulse low time tPL_CNmin 25 ns11
Setup time: BUSY falling to CS falling tSU_BSYCSmin 0 ns11
Setup time: RESET falling to first rising edge of CONVSTA or CONVSTB tSU_RSTCNmin 25 ns11
RESET pulse high time tPH_RSTmin 50 ns11
Delay between rising edges of CONVSTA and CONVSTB tD_CNABmax 500 us11
Delay between CONVSTA, CONVSTB rising edge to CS falling edge, start of data read operation during conversion tDZ_CNCSmin 10 ns11
Delay between CS rising edge to BUSY falling edge, end of data read operation during conversion tDZ_CSBSYmin 40 ns11
Setup time: BUSY falling edge to CS falling edge, start of data read operation after conversion tSU_BSYCSmin 0 ns11
Delay between CS rising edge to CONVSTA, CONVSTB rising edge, end of data read operation after conversion tD_CSCNmin 10 ns11
CS and RD high time tPH_CS, tPH_RDmin 15 ns11
CS and RD low time tPL_CS, tPL_RDmin 15 ns11
Hold time: RD and CS rising edge to DB[15:0] invalid tHT_RDDB, tHT_CSDBmin 2.5 ns11
Setup time: CS falling edge to RD falling edge tSU_CSRDmin 0 ns12
Hold time: RD rising edge to CS rising edge tHT_RDCSmin 0 ns12
RD low time tPL_RDmin 15 ns12
RD high time tPH_RDmin 15 ns12
Hold time: CS rising edge to DB[15:0] becoming invalid tHT_CSDBmin 6 ns12
Hold time: RD rising edge to DB[15:0] becoming invalid tHT_RDDBmin 2.5 ns12
SCLK time period tSCLKmin 50 ns12
SCLK high time tPH_SCLKmin 0.45 · max 0.55 tSCLK12
SCLK low time tPL_SCLKmin 0.45 · max 0.55 tSCLK12
Hold time: SCLK rising edge to DOUTA, DOUTB invalid tHT_CKDOmin 7 ns12
Setup time: CS falling to first SCLK edge tSU_CSCKmin 8 ns12
Hold time: last SCLK active edge to CS high tHT_CKCSmin 10 ns12
Hold time: BUSY falling to OSx tHT_OSmin 20 ns12
Setup time: BUSY falling to OSx tSU_OSmin 20 ns12
Delay between STBY rising edge to CONVSTA or CONVSTB rising edge tD_STBYCNmin 100 us12
Delay between STBY rising edge to RESET rising edge tD_SDRSTInternal reference modemin 50 ms13
Delay between STBY rising edge to RESET rising edge tD_SDRSTExternal reference mode; excludes wake-up time for external reference devicemin 13 ms13
RESET high time tPH_RSTmin 50 ns13
Delay between RESET falling edge to CONVSTA or CONVSTB rising edge tD_RSTCNmin 25 us13
ADC cycle time period tCYCNo oversampling, parallel read, serial read with both DOUTA and DOUTB during conversionmin 5 us13
ADC cycle time period tCYCNo oversampling, serial read after conversion with both DOUTA and DOUTBmin 9.7 us13
ADC cycle time period tCYCNo oversampling, serial read after conversion with only DOUTA or DOUTBmin 15 us13
Conversion time: BUSY high time tCONVNo oversamplingmin 3.7 · typ 3.8 · max 3.9 us13
Conversion time: BUSY high time tCONVOversampling by 2min 8.4 · max 8.8 us13
Conversion time: BUSY high time tCONVOversampling by 4min 17.5 · max 18.5 us13
Conversion time: BUSY high time tCONVOversampling by 8min 36 · max 38 us13
Conversion time: BUSY high time tCONVOversampling by 16min 73 · max 77 us13
Conversion time: BUSY high time tCONVOversampling by 32min 148 · max 155 us13
Conversion time: BUSY high time tCONVOversampling by 64min 298 · max 311 us13
Delay between trailing rising edges of CONVSTA or CONVSTB and BUSY rising tD_CNBSYmax 15 ns13
Delay time: CS and RD falling edge to DB[15:0] becoming valid (out of tri-state) tD_CSDB, tD_RDDBmax 12 ns13
Delay time: CS and RD falling edge to FRSTDATA going high or low out of tri-state tD_CSFD, tD_RDFDmax 10 ns13
Delay time: CS and RD rising edge to DB[15:0] tri-state tDHZ_CSDB, tDHZ_RDDBmax 12 ns13
Delay time: CS and RD rising edge to FRSTDATA tri-state tDHZ_CSFD, tDHZ_RDFDmax 10 ns13
Delay time: CS falling edge to DB[15:0] becoming valid (out of tri-state) tD_CSDBmax 12 ns14
Delay time: RD falling edge to new data on DB[15:0] tD_RDDBmax 17 ns14
Delay time: CS rising edge to DB[15:0] becoming tri-state tDHZ_CSDBmax 12 ns14
Delay time: CS falling edge to FRSTDATA going low out of tri-state tD_CSFDmax 15 ns14
Delay time: CS rising edge to FRSTDATA going to tri-state tDHZ_CSFDmax 10 ns14
Delay time: RD falling edge to FRSTDATA going high or low tD_RDFDmax 15 ns14
Delay time: CS falling edge to DOUTA, DOUTB enable (out of tri-state) tD_CSDOmax 12 ns14
Delay time: SCLK rising edge to valid data on DOUTA, DOUTB tD_CKDOmax 15 ns14
Delay time: CS rising edge to DOUTA, DOUTB going to tri-state tDZ_CSDOmax 12 ns14
Delay time: CS falling edge to FRSTDATA from tri-state to high or low tD_CSFDmax 10 ns14
Delay time: 16th SCLK falling edge to FRSTDATA falling edge tDZ_CKFDmax 15 ns14
Delay time: CS falling edge to DB[7:0] becoming valid (out of tri-state) tD_CSDBmax 12 ns14
Delay time: RD falling edge to new data on DB[7:0] tD_RDDBmax 17 ns14
Delay time: CS rising edge to DB[7:0] becoming tri-state tDHZ_CSDBmax 12 ns14
Delay time: CS falling edge to FRSTDATA going low out of tri-state tD_CSFDmax 10 ns14
Delay time: RD falling edge to FRSTDATA going low or high state tD_RDFDmax 15 ns14

Pins, by the datasheet

16
3 OS0
Oversampling mode control pin. · p. 6
4 OS1
Oversampling mode control pin. · p. 6
5 OS2
Oversampling mode control pin. · p. 6
6 PAR/SER/BYTE SEL
Selects parallel, serial, or parallel byte interface mode. · p. 6
8 RANGE
Selects ±10 V or ±5 V input range when STBY is high; selects standby or shutdown when STBY is low. · p. 6
12 RD/SCLK
Active-low ready input in parallel and parallel byte interfaces; clock input in serial mode. · p. 6
44 REFCAPA
Reference amplifier output; short to REFCAPB and decouple to AGND with a low ESR, 10-uF ceramic capacitor. · p. 6
45 REFCAPB
Reference amplifier output; short to REFCAPA and decouple to AGND with a low ESR, 10-uF ceramic capacitor. · p. 6
43 REFGND
Short to the analog GND plane; decouple REFIN/REFOUT on pin 42 with a 10-uF capacitor. · p. 6
46 REFGND
Short to the analog GND plane; decouple REFIN/REFOUT on pin 42 with a 10-uF capacitor. · p. 6
42 REFIN/REFOUT
Internal reference output when REFSEL is high, external reference input when low; decouple to REFGND pin 43 with 10 uF. · p. 6
34 REFSEL
Active high input enabling the internal reference. · p. 6
36 REGCAP1
Internal voltage regulator output 1; decouple separately to AGND with a 1-uF capacitor. · p. 6
39 REGCAP2
Internal voltage regulator output 2; decouple separately to AGND with a 1-uF capacitor. · p. 6
11 RESET
Active high input resetting device digital logic. · p. 6
7 STBY
Active low input entering standby or shutdown mode. · p. 6

Ordering codes, by the datasheet

4
ADS8588SIPM
LQFP (PM) | 64 · 160-unit JEDEC tray (10+1); operating temperature -40 to 125 °C · p. 55
ADS8588SIPM.A
LQFP (PM) | 64 · 160-unit JEDEC tray (10+1); operating temperature -40 to 125 °C · p. 55
ADS8588SIPMR
LQFP (PM) | 64 · 1000-unit large tape and reel; operating temperature -40 to 125 °C · p. 55
ADS8588SIPMR.A
LQFP (PM) | 64 · 1000-unit large tape and reel; operating temperature -40 to 125 °C · p. 55

Open-source boards using it

3
  • 4 layers130 × 95 mmAx7010 servo reva, the printed circuit board in 3D

    Ax7010 servo reva

    magic-alt/fpga-servo

    This directory preserves the ADS8588S legacy PCB, native project and custom rules from b0172a2f65902c7281cf4a8454f192dc791a9ef9.

    183 parts
  • 2 layers130 × 95 mmAx7010 servo reva, the printed circuit board in 3D

    Ax7010 servo reva

    magic-alt/fpga-servo

    This directory preserves the ADS8588S legacy PCB, native project and custom rules from b0172a2f65902c7281cf4a8454f192dc791a9ef9.

    166 parts
  • 2 layers130 × 95 mmBefore, the printed circuit board in 3D

    Before

    magic-alt/fpga-servo

    This directory preserves the ADS8588S legacy PCB, native project and custom rules from b0172a2f65902c7281cf4a8454f192dc791a9ef9.

    162 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ADS8588SIPM?

Yes. The symbol is EasyEDA_Cloud:ADS8588SIPMR and the footprint Package_QFP:LQFP-64_10x10mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ADS8588SIPM?

LQFP-64(10x10), with 64 pins. Its footprint is drawn on this page.

Where is the ADS8588SIPM datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the ADS8588SIPM?

JLCPCB lists it as part C1543171, with 80 in stock; the sellers' links on this page open their listings.

What can replace the ADS8588SIPM?

Parts like it in the library: the ADS8588SIPMR by Texas Instruments, the AD7768BSTZ-RL by Analog Devices, the AD7768-4BSTZ-RL7 by Analog Devices and the CM2248-QFPTR by CIMO. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ADS8588SIPM?

3 boards in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.