Skip to the content

ADS124S08IPBSR

Texas InstrumentsExtended

-50℃~+125℃ 12 2.7V~5.25V 24 280uA 4.096MHz 4kHz Auto calibration、Built-in temperature sensor、Multiplexers、Power-on reset、Bipolar power supply Built-in Built-in SPI Sigma-Delta Support Yes TQFP-32(5x5) Analog to Digital Converters (ADC) ROHS

Part id
ti/ADS124S08IPBSR
Category
Analog To Digital Converters (ADC)
Package
TQFP-32(5x5)
Pins
32
In stock
2,383 at JLCPCB (C2870171)
Used on
2 open-source boards

Overview

The ADS124S08IPBSR is an analog To Digital Converter made by Texas Instruments in a TQFP-32(5x5) package with 32 pins. -50℃~+125℃ 12 2.7V~5.25V 24 280uA 4.096MHz 4kHz Auto calibration、Built-in temperature sensor、Multiplexers、Power-on reset、Bipolar power supply Built-in Built-in SPI Sigma-Delta Support Yes TQFP-32(5x5) Analog to Digital Converters (ADC) ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:ADS124S08IPBSR_C39676001, from EasyEDA) and its footprint (Package_QFP:TQFP-32_5x5mm_P0.5mm, from KiCad's library), ready for a KiCad board. 2,383 are in stock at JLCPCB (part C2870171). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

25NC17CLK9CS#11SCLK8START/SYNC10DIN12DOUT/DRDY#13DRDY#22GPIO0/AIN821GPIO1/AIN920GPIO2/AIN1019GPIO3/AIN1114DGND28AVSS-SW27AVSS18RESET#32REFP1/AIN630REFP023REFOUT31REFN1/AIN729REFN024REFCOM1AINCOM2AIN53AIN44AIN35AIN26AIN17AIN015IOVDD16DVDD26AVDD
EasyEDA_Cloud:ADS124S08IPBSR_C39676001From EasyEDA

Footprint

Package_QFP:TQFP-32_5x5mm_P0.5mmFrom KiCad's library

Pinout

32
The pins of the ADS124S08IPBSR
PinNameType
1AINCOMUnspecified
2AIN5Unspecified
3AIN4Unspecified
4AIN3Unspecified
5AIN2Unspecified
6AIN1Unspecified
7AIN0Unspecified
8START/SYNCUnspecified
9CS#Unspecified
10DINUnspecified
11SCLKUnspecified
12DOUT/DRDY#Unspecified
13DRDY#Unspecified
14DGNDUnspecified
15IOVDDUnspecified
16DVDDUnspecified
17CLKUnspecified
18RESET#Unspecified
19GPIO3/AIN11Unspecified
20GPIO2/AIN10Unspecified
21GPIO1/AIN9Unspecified
22GPIO0/AIN8Unspecified
23REFOUTUnspecified
24REFCOMUnspecified
25NCUnspecified
26AVDDUnspecified
27AVSSUnspecified
28AVSS-SWUnspecified
29REFN0Unspecified
30REFP0Unspecified
31REFN1/AIN7Unspecified
32REFP1/AIN6Unspecified

Open-source boards using it

2
  • 6 layers69 × 54 mmOpen control board, the printed circuit board in 3D

    Open control board

    variegated-coffee/all-purpose-espresso-controller

    Espresso electronics are usually proprietary affairs with little to no expandability. The purpose of this project is to give everyone an open source alternative with lots of features and flexibility.

    201 parts14CERN-OHL-P-2.0
  • 4 layers100 × 100 mmHV Controller, the printed circuit board in 3D

    HV Controller

    MECSEM/electrical

    All the electrical designs for MECSEM.

    283 partsGPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ADS124S08IPBSR?

Yes. The symbol is EasyEDA_Cloud:ADS124S08IPBSR_C39676001 and the footprint Package_QFP:TQFP-32_5x5mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ADS124S08IPBSR?

TQFP-32(5x5), with 32 pins. Its footprint is drawn on this page.

Where is the ADS124S08IPBSR datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the ADS124S08IPBSR?

JLCPCB lists it as part C2870171, with 2,383 in stock; the sellers' links on this page open their listings.

What can replace the ADS124S08IPBSR?

Parts like it in the library: the ADS114S08BIPBSR by Texas Instruments, the ADS114S08IPBSR by Texas Instruments, the ADS124S06IPBSR by Texas Instruments and the ADS114S06BIPBS by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ADS124S08IPBSR?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.