Skip to the content
SOP-4

GAQY212GS

SUPSiCExtended

-40℃~+85℃ 1.2V 100us 2.5kV 240mΩ 30mA 350us 500mW 60V 800mA AC,DC One set normally open: 2A (SPST - normally open) SOP-4 Solid State Relays (MOS Output) ROHS

Part id
supsic/GAQY212GS
Category
Solid State Relays (MOS Output)
Package
SOP-4
Pins
4
In stock
137,137 at JLCPCB (C7435107)
Used on
5 open-source boards

Overview

The GAQY212GS is a solid State Relay made by SUPSiC in a SOP-4 package with 4 pins. -40℃~+85℃ 1.2V 100us 2.5kV 240mΩ 30mA 350us 500mW 60V 800mA AC,DC One set normally open: 2A (SPST - normally open) SOP-4 Solid State Relays (MOS Output) ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:AQY222R2TW, from EasyEDA), ready for a KiCad board. 137,137 are in stock at JLCPCB (part C7435107). 5 open-source boards in 5 repositories on GitHub use it.

Symbol

1234
EasyEDA_Cloud:AQY222R2TWFrom EasyEDA

Footprint

The library has no footprint for this part yet.

From the datasheet

4
Gives
800 mA · maximum continuous load current at Ta = 25°C · p. 2
Works from
-40 °C · minimum operating ambient temperature · p. 2
Works up to
85 °C · maximum operating ambient temperature · p. 2
Forward voltage
1.32 V · typical input LED forward voltage at IF = 10mA · p. 2

What it is and has

4
Contact configuration
1 Form A · p. 1
Package
SOP-4 · p. 1
Switching
Higher speed and high frequency switching · p. 1
Immunity
EMI or RFI · p. 1

Around it

1
res 300
between E1 and LED Anode; Approximate R1 for E1 = 3.3V and IF = 5mA; resistance unit is not printed. · p. 5

Specifications

28
ParameterConditionsAs printedPage
Load Voltage VLmax 60 V1
Load Current ILmax 0.8 A1
On-Resistance RonSummary rating; limit type not specifiedtyp 0.24 Ω1
I/O Isolation Voltage V/IOmax 2500 Vrms1
Continuous LED Current IFTa = 25°Cmax 50 mA2
Peak LED Current IFPTa = 25°C; f=100Hz, duty=1%max 1000 mA2
LED Reverse Voltage VRTa = 25°Cmax 5 V2
Input Power Dissipation PInTa = 25°Cmax 75 mW2
Load Voltage VLTa = 25°Cmax 60 V(AC peak or DC)2
Load Current ILTa = 25°Cmax 0.8 A2
Peak Load Current IPeakTa = 25°C; 100ms(1 pulse)max 1.5 A2
Output Power Dissipation PoutTa = 25°Cmax 450 mW2
Total Power Dissipation PTTa = 25°Cmax 500 mW2
I/O Isolation Voltage VI/OTa = 25°C; RH=60%, 1minmax 2500 Vrms2
Operating Temperature Toprmin -40 · max 85 ℃2
Storage Temperature Tstgmin -40 · max 100 ℃2
Pin Soldering Temperature Tsol10 sec max.max 260 ℃2
LED Forward Voltage VFIF=10mAtyp 1.32 · max 1.5 V2
Operation LED Current IF ontyp 0.8 · max 2 mA2
Recovery LED Current IF offtyp 0.35 · max 0.5 mA2
Recovery LED Voltage VF offmin 0.7 V2
On-Resistance RonTime to flow is within 1 sec.typ 0.24 · max 0.6 Ω2
Off-State Leakage Current ILeakVL=Ratingtyp 0.1 uA2
Output Capacitance CoutVL=0, f=1MHztyp 28 pF2
Turn-On Time Tontyp 0.35 · max 0.5 ms2
Turn-Off Time Tofftyp 0.1 · max 0.3 ms2
I/O Capacitance CI/Of=1MHztyp 0.8 · max 1.5 pF2
Forward current IFmin 5 · typ 7 · max 30 mA5

Pins, by the datasheet

4
1 LED Anode
Input LED anode. · p. 1
2 LED Cathode
Input LED cathode. · p. 1
3 Drain(MOS FET)
MOS FET drain load terminal for AC or DC switching. · p. 1
4 Drain(MOS FET)
MOS FET drain load terminal for AC or DC switching. · p. 1

Ordering codes, by the datasheet

1
GAQY212GS
SOP-4 · AC / DC, 60V load voltage, 0.8A load current; 2000pcs /reel · p. 1

Open-source boards using it

5
  • 4 layers64 × 59 mmDoorbell, the printed circuit board in 3D

    Doorbell

    gunnarbeutner/doorbell

    doorbell.kicadsch / doorbell.kicadpcb are the authoritative source — edit them in KiCad. build.sh never authors copper; it runs the checks KiCad's own DRC/ERC can't express and exports the fab outputs:

    119 parts1MIT
  • 4 layers86 × 29.9 mmGeiger probe, the printed circuit board in 3D

    Geiger probe

    bartkepl/CanGeigerProbe

    Polowa sonda promieniowania jonizującego z miniaturową lampą Geigera-Müllera, komunikująca się cyfrowo przez CAN 2.0B.

    116 partsMIT
  • 4 layers76 × 29.9 mmGnss node, the printed circuit board in 3D

    Gnss node

    bartkepl/CanGnssNode

    Polowy węzeł pozycyjny z modułem GNSS Quectel L76-L (GPS/GLONASS/Galileo/QZSS) i czujnikiem orientacji (akcelerometr + magnetometr), komunikujący się cyfrowo przez CAN 2.0B.

    141 partsMIT
  • 4 layers120 × 75 mmControlPanel, the printed circuit board in 3D

    ControlPanel

    bartkepl/ControlPanelV3S

    V3S CAN-bus control panel - KiCad hardware

    327 partsMIT
  • 6 layers160 × 100 mmBuslab, the printed circuit board in 3D

    Buslab

    tombueng/hilprobe

    HILprobe: multi-function UUT probe for hardware-in-the-loop testing - RS-485, CAN FD, logic analyzer, 4-ch scope, two programmable UUT supplies. KiCad 10, 6 layers, RP2350B + ESP32-S3.

    429 parts

Questions

Is there a KiCad symbol and footprint for the GAQY212GS?

Yes. The symbol is EasyEDA_Cloud:AQY222R2TW, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the GAQY212GS?

SOP-4, with 4 pins.

Where is the GAQY212GS datasheet?

SUPSiC publishes it: the Datasheet link on this page opens it.

Where can I order the GAQY212GS?

JLCPCB lists it as part C7435107, with 137,137 in stock; the sellers' links on this page open their listings.

Which open-source boards use the GAQY212GS?

5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.