VIPER26LN
STMicroelectronicsExtended
-40℃~+150℃@(Tj) 11.5V~23.5V 60kHz 70% 800V Flyback Isolation PWM Modulation Primary-Side Feedback Under Voltage Protection、Over Current Protection、Short Circuit Protection、Soft Start、Over Temperature Protection DIP-7 AC-DC Controllers and Regulators ROHS
- Part id
- st/VIPER26LN
- Category
- AC DC Controllers And Regulators
- Package
- DIP-7
- Pins
- 7
- In stock
- 326 at JLCPCB (C726099)
Overview
The VIPER26LN is an AC DC Controllers And Regulator made by STMicroelectronics in a DIP-7 package with 7 pins. -40℃~+150℃@(Tj) 11.5V~23.5V 60kHz 70% 800V Flyback Isolation PWM Modulation Primary-Side Feedback Under Voltage Protection、Over Current Protection、Short Circuit Protection、Soft Start、Over Temperature Protection DIP-7 AC-DC Controllers and Regulators ROHS.
PCBKit's library has its KiCad symbol (Regulator_Switching:VIPer26LN, from KiCad's library) and its footprint (Package_DIP:DIP-8-N6_W7.62mm, from KiCad's library), ready for a KiCad board. 326 are in stock at JLCPCB (part C726099).
Symbol
Footprint
Pinout
7| Pin | Name | Type |
|---|---|---|
| 1 | GND | Power in |
| 2 | VDD | Power in |
| 3 | LIM | Passive |
| 4 | FB | Input |
| 5 | COMP | Passive |
| 7 | DRAIN | Passive |
| 8 | DRAIN | Passive |
Parts like it
1
Questions
Is there a KiCad symbol and footprint for the VIPER26LN?
Yes. The symbol is Regulator_Switching:VIPer26LN and the footprint Package_DIP:DIP-8-N6_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the VIPER26LN?
DIP-7, with 7 pins. Its footprint is drawn on this page.
Where is the VIPER26LN datasheet?
STMicroelectronics publishes it: the Datasheet link on this page opens it.
Where can I order the VIPER26LN?
JLCPCB lists it as part C726099, with 326 in stock; the sellers' links on this page open their listings.
What can replace the VIPER26LN?
Parts like it in the library: the VIPER26HN by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.