VIPER26HN
STMicroelectronics
-40℃~+150℃ 11.5V~23.5V 115kHz 1W 70% 800V Flyback Isolation Over Current Protection、Short Circuit Protection、Soft-start、Overtemperature protection (OTP) PWM Modulation Primary-side feedback PDIP-7 AC-DC Controllers and Regulators ROHS
- Category
- AC DC Controllers And Regulators
- Package
- PDIP-7
- Pins
- 7
Overview
The VIPER26HN is an AC DC Controllers And Regulator made by STMicroelectronics in a PDIP-7 package with 7 pins. -40℃~+150℃ 11.5V~23.5V 115kHz 1W 70% 800V Flyback Isolation Over Current Protection、Short Circuit Protection、Soft-start、Overtemperature protection (OTP) PWM Modulation Primary-side feedback PDIP-7 AC-DC Controllers and Regulators ROHS.
PCBKit's library has its KiCad symbol (Regulator_Switching:VIPer26HN, from KiCad's library) and its footprint (Package_DIP:DIP-8-N6_W7.62mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C472604).
Symbol
Footprint
Parameters
11- Duty Cycle(Max)
- 70%
- Features
- Over Current Protection, Short Circuit Protection, Soft-start, Overtemperature protection (OTP)
- Feedback System
- Primary-side feedback
- Frequency - Switching
- 115kHz
- Isolation
- Isolation
- Operating Temperature
- -40℃~+150℃
- Pd - Power Dissipation
- 1W
- Topology
- Flyback
- Voltage - Breakdown
- 800V
- Voltage - Supply
- 11.5V~23.5V
- Working Mode
- PWM Modulation
Order codes
1- VIPER26HNLCSC C472604
Pinout
7| Pin | Name | Type |
|---|---|---|
| 1 | GND | Power in |
| 2 | VDD | Power in |
| 3 | LIM | Passive |
| 4 | FB | Input |
| 5 | COMP | Passive |
| 7 | DRAIN | Passive |
| 8 | DRAIN | Passive |
Show this part on your page
<iframe src="https://pcbkit.io/embed/parts/st/VIPER26HN" title="VIPER26HN in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/st/VIPER26HN.jpg" alt="VIPER26HN" width="1200" height="900">[](https://pcbkit.io/parts/st/VIPER26HN)Questions
Is there a KiCad symbol and footprint for the VIPER26HN?
Yes. The symbol is Regulator_Switching:VIPer26HN and the footprint Package_DIP:DIP-8-N6_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the VIPER26HN?
PDIP-7, with 7 pins. Its footprint is drawn on this page.
Where is the VIPER26HN datasheet?
STMicroelectronics publishes it: the Datasheet link on this page opens it.
Where can I order the VIPER26HN?
JLCPCB lists it as part C472604, with 0 in stock; the sellers' links on this page open their listings.
What can replace the VIPER26HN?
Parts like it in the library: the VIPER26LN by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.
