Skip to the content
12345

STWD100NYWY3F

STMicroelectronicsExtended

-40℃~+125℃@(TA) 1 13uA 2.7V~5.5V 210ms Active Low Open-drain Watchdog timer、Manual reset input SOT-23-5 Supervisor and Reset ICs ROHS

Part id
st/STWD100NYWY3F
Category
Supervisor And Reset ICs
Package
SOT-23-5
Pins
5
In stock
16,060 at JLCPCB (C46043)
Used on
4 open-source boards

Overview

The STWD100NYWY3F is a supervisor And Reset IC made by STMicroelectronics in a SOT-23-5 package with 5 pins. -40℃~+125℃@(TA) 1 13uA 2.7V~5.5V 210ms Active Low Open-drain Watchdog timer、Manual reset input SOT-23-5 Supervisor and Reset ICs ROHS.

PCBKit's library has its KiCad symbol (dk_PMIC-Supervisors:STWD100NYWY3F, from Digikey) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 16,060 are in stock at JLCPCB (part C46043). 4 open-source boards in 3 repositories on GitHub use it.

Symbol

1WDO2GND3EN4WDI5VCC
dk_PMIC-Supervisors:STWD100NYWY3FFrom Digikey

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

From the datasheet

8
Supply, least
2.7 V · VCC, recommended operating, min · p. 17
Supply, most
5.5 V · VCC, recommended operating, max · p. 17
Supply, absolute maximum
7 V · VCC, absolute maximum · p. 15
Works from
-40 °C · ambient operating temperature, min · p. 17
Works up to
125 °C · ambient operating temperature, max · p. 17
Takes working
13 µA · VCC operating supply current, typical · p. 17
Takes at most
26 µA · VCC operating supply current, max · p. 17
A pin gives at most
20 mA · output current, absolute maximum · p. 15

Pinout

5
The pins of the STWD100NYWY3F
PinNameType
1WDOOutput
2GNDPower in
3ENInput
4WDIInput
5VCCPower in

Open-source boards using it

4
  • 4 layers92 × 92 mmRtihu, the printed circuit board in 3D

    Rtihu

    AMSAT-NA/PacSatDocs

    395 parts4
  • 2 layers140 × 64 mmThermostat v3, the printed circuit board in 3D

    Thermostat v3

    Connicpu/thermostat

    DIY Zigbee thermostat (ESP32-C6) with day/night schedule and a Home Assistant Lovelace card

    101 partsMIT
  • 6 layers111.8 × 111.8 mmRt ihu, the printed circuit board in 3D

    Rt ihu

    zmetzing/rt-ihu

    Radiation Tolerant IHU (Flight Computer)

    524 partsBSD-2-Clause

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the STWD100NYWY3F?

Yes. The symbol is dk_PMIC-Supervisors:STWD100NYWY3F and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the STWD100NYWY3F?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the STWD100NYWY3F datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the STWD100NYWY3F?

JLCPCB lists it as part C46043, with 16,060 in stock; the sellers' links on this page open their listings.

What can replace the STWD100NYWY3F?

Parts like it in the library: the TPS3828-33DBV by Texas Instruments, the APX823-26W5G by Diodes Incorporated, the TPS3820-33DBV by Texas Instruments and the TLV840CADL29DBV by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the STWD100NYWY3F?

4 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.