
Beerator
Artpel1805/Beerator
Le but du projet est de réaliser intégralement un robot capable de se déplacer, de chercher et d’attraper une canette (de bière ? 😶), relever sa couleur, puis de la déposer dans la zone de couleur correspondante.
STMicroelectronicsExtended
-40℃~+85℃ 128KB 12bit 2V~3.6V 32 Bit 36KB 59 64MHz ARM Cortex-M0+ Built-in+External FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHS
The STM32G070RBT6 is a microcontroller Unit made by STMicroelectronics in a LQFP-64(10x10) package with 64 pins. -40℃~+85℃ 128KB 12bit 2V~3.6V 32 Bit 36KB 59 64MHz ARM Cortex-M0+ Built-in+External FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its KiCad symbol (MCU_ST_STM32G0:STM32G070RBTx, from KiCad's library) and its footprint (Package_QFP:LQFP-64_10x10mm_P0.5mm, from KiCad's library), ready for a KiCad board. 2,812 are in stock at JLCPCB (part C529340). 8 open-source boards in 8 repositories on GitHub use it.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| External supply voltage VDD | Absolute maximum ratings | min -0.3 · max 4 V | 42 |
| External supply voltage on VBAT pin VBAT | Absolute maximum ratings | min -0.3 · max 4 V | 42 |
| External voltage on VREF+ pin VREF+ | Maximum: Min(VDD + 0.4, 4.0) | min -0.3 V | 42 |
| Input voltage on FT_xx pins except FT_c VIN | Maximum: VDD + 4.0; internal pull-up/pull-down resistors disabled above 4 V | min -0.3 V | 42 |
| Input voltage on FT_c pins VIN | min -0.3 · max 5.5 V | 42 | |
| Input voltage on any other pin VIN | min -0.3 · max 4 V | 42 | |
| Current into VDD/VDDA power pin (source) IVDD/VDDA | max 100 mA | 42 | |
| Current out of VSS/VSSA ground pin (sink) IVSS/VSSA | max 100 mA | 42 | |
| Output current sunk by any I/O and control pin except FT_f IIO(PIN) | max 15 mA | 42 | |
| Output current sunk by any FT_f pin IIO(PIN) | max 20 mA | 42 | |
| Output current sourced by any I/O and control pin IIO(PIN) | max 15 mA | 42 | |
| Total output current sunk by sum of all I/Os and control pins ∑IIO(PIN) | max 80 mA | 42 | |
| Total output current sourced by sum of all I/Os and control pins ∑IIO(PIN) | max 80 mA | 42 | |
| Injected current on a FT_xx pin IINJ(PIN) | Negative injection limit; positive injection NA | max -5 mA | 42 |
| Injected current on a TT_a pin IINJ(PIN) | Negative injection limit | max -5 mA | 42 |
| Injected current on a TT_a pin IINJ(PIN) | Positive injection limit | max 0 mA | 42 |
| Total injected current (sum of all I/Os and control pins) ∑|IINJ(PIN)| | max 25 mA | 42 | |
| Storage temperature range TSTG | min -65 · max 150 °C | 43 | |
| Maximum junction temperature TJ | Absolute maximum ratings | max 150 °C | 43 |
| Internal AHB clock frequency fHCLK | min 0 · max 64 MHz | 43 | |
| Internal APB clock frequency fPCLK | min 0 · max 64 MHz | 43 | |
| Supply voltage VDD/DDA | When RESET is released functionality is guaranteed down to VPDR min | min 2 · max 3.6 V | 43 |
| Backup operating voltage VBAT | min 1.55 · max 3.6 V | 43 | |
| I/O input voltage VIN | Maximum: Min(VDD + 3.6, 5.5); disable internal pull-up and pull-down resistors above VDD +0.3 V | min -0.3 V | 43 |
| Ambient temperature TA | TA(max) applies to PD(max) | min -40 · max 85 °C | 43 |
| Junction temperature TJ | min -40 · max 105 °C | 43 | |
| VDD slew rate tVDD | VDD falling; maximum ∞ | min 10 us/V | 43 |
| POR temporization when VDD crosses VPOR tRSTTEMPO | VDD rising | typ 250 · max 400 us | 44 |
| Power-on reset threshold VPOR | min 2.06 · typ 2.1 · max 2.14 V | 44 | |
| Power-down reset threshold VPDR | min 1.96 · typ 2 · max 2.04 V | 44 | |
| Hysteresis of VPOR and VPDR Vhyst_POR_PDR | Hysteresis in continuous mode | typ 20 mV | 44 |
| Hysteresis of VPOR and VPDR Vhyst_POR_PDR | Hysteresis in other mode | typ 30 mV | 44 |
| Internal reference voltage VREFINT | -40°C < TJ < 105°C | min 1.182 · typ 1.212 · max 1.232 V | 44 |
| ADC sampling time when reading the internal reference voltage tS_vrefint | min 4 us | 44 | |
| Start time of reference voltage buffer when ADC is enable tstart_vrefint | typ 8 · max 12 us | 44 | |
| VREFINT buffer consumption from VDD when converted by ADC IDD(VREFINTBUF) | typ 12.5 · max 20 uA | 44 | |
| Internal reference voltage spread over the temperature range ∆VREFINT | VDD = 3 V | typ 5 · max 7.5 mV | 44 |
| Temperature coefficient TCoeff_vrefint | typ 30 · max 50 ppm/°C | 44 | |
| Long term stability ACoeff | 1000 hours, T = 25 °C | typ 300 · max 1000 ppm | 44 |
| Voltage coefficient VDDCoeff | 3.0 V < VDD < 3.6 V | typ 250 · max 1200 ppm/V | 44 |
| 1/4 reference voltage VREFINT_DIV1 | min 24 · typ 25 · max 26 % VREFINT | 44 | |
| 1/2 reference voltage VREFINT_DIV2 | min 49 · typ 50 · max 51 % VREFINT | 44 | |
| 3/4 reference voltage VREFINT_DIV3 | min 74 · typ 75 · max 76 % VREFINT | 44 | |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 64 MHz; Flash memory; 25°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 6.9 · max 8 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 64 MHz; Flash memory; 85°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 7 · max 8.4 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 56 MHz; Flash memory; 25°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 6.1 · max 7.1 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 56 MHz; Flash memory; 85°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 6.3 · max 7.6 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 48 MHz; Flash memory; 25°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 5.5 · max 6.2 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 48 MHz; Flash memory; 85°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 5.6 · max 6.8 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 32 MHz; Flash memory; 25°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 3.9 · max 4.8 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 32 MHz; Flash memory; 85°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 4 · max 5.2 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 24 MHz; Flash memory; 25°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 3.1 · max 3.7 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 24 MHz; Flash memory; 85°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 3.2 · max 4.3 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; HSI bypass; 16 MHz; Flash memory; 25°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 2 · max 2.5 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; HSI bypass; 16 MHz; Flash memory; 85°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 2.1 · max 3 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 64 MHz; SRAM; 25°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 6.6 · max 7.6 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 64 MHz; SRAM; 85°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 6.8 · max 7.9 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 56 MHz; SRAM; 25°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 5.8 · max 6.7 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 56 MHz; SRAM; 85°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 6.1 · max 7 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 48 MHz; SRAM; 25°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 5.2 · max 6 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 48 MHz; SRAM; 85°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 5.3 · max 6.2 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 32 MHz; SRAM; 25°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 3.6 · max 4.2 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 32 MHz; SRAM; 85°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 3.7 · max 4.6 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 24 MHz; SRAM; 25°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 2.9 · max 3.4 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 24 MHz; SRAM; 85°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 3 · max 3.7 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; HSI bypass; 16 MHz; SRAM; 25°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 1.9 · max 2.3 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; HSI bypass; 16 MHz; SRAM; 85°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 1.9 · max 2.5 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 2; PLL enabled; HSI bypass; 16 MHz; Flash memory; 25°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 1.5 · max 2 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 2; PLL enabled; HSI bypass; 16 MHz; Flash memory; 85°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 1.7 · max 2.4 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 2; PLL enabled; HSI bypass; 8 MHz; Flash memory; 25°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 0.9 · max 1.4 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 2; PLL enabled; HSI bypass; 8 MHz; Flash memory; 85°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 1 · max 1.6 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 2; PLL enabled; HSI bypass; 2 MHz; Flash memory; 25°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 0.3 · max 0.6 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 2; PLL enabled; HSI bypass; 2 MHz; Flash memory; 85°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 0.3 · max 1 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 2; PLL enabled; HSI bypass; 16 MHz; SRAM; 25°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 1.5 · max 1.9 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 2; PLL enabled; HSI bypass; 16 MHz; SRAM; 85°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 1.5 · max 2.2 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 2; PLL enabled; HSI bypass; 8 MHz; SRAM; 25°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 0.8 · max 1.3 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 2; PLL enabled; HSI bypass; 8 MHz; SRAM; 85°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 0.9 · max 1.4 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 2; PLL enabled; HSI bypass; 4 MHz; SRAM; 25°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 0.4 · max 0.8 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 2; PLL enabled; HSI bypass; 4 MHz; SRAM; 85°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 0.6 · max 1.1 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 2; PLL enabled; HSI bypass; 2 MHz; SRAM; 25°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 0.3 · max 0.6 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 2; PLL enabled; HSI bypass; 2 MHz; SRAM; 85°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 0.3 · max 1 mA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; HSE bypass; 2 MHz; Flash memory; 25°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 242 · max 636 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; HSE bypass; 2 MHz; Flash memory; 85°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 281 · max 954 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; HSE bypass; 1 MHz; Flash memory; 25°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 116 · max 606 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; HSE bypass; 1 MHz; Flash memory; 85°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 171 · max 924 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; HSE bypass; 500 kHz; Flash memory; 25°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 74 · max 558 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; HSE bypass; 500 kHz; Flash memory; 85°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 116 · max 840 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; HSE bypass; 125 kHz; Flash memory; 25°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 29 · max 540 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; HSE bypass; 125 kHz; Flash memory; 85°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 73 · max 624 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; LSE bypass; 32 kHz; Flash memory; 25°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 19 · max 450 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; LSE bypass; 32 kHz; Flash memory; 85°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 62 · max 570 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; HSE bypass; 2 MHz; SRAM; 25°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 219 · max 582 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; HSE bypass; 2 MHz; SRAM; 85°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 254 · max 840 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; HSE bypass; 1 MHz; SRAM; 25°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 105 · max 516 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; HSE bypass; 1 MHz; SRAM; 85°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 154 · max 792 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; HSE bypass; 500 kHz; SRAM; 25°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 67 · max 438 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; HSE bypass; 500 kHz; SRAM; 85°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 105 · max 750 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; HSE bypass; 125 kHz; SRAM; 25°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 26 · max 402 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; HSE bypass; 125 kHz; SRAM; 85°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 65 · max 528 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; LSE bypass; 32 kHz; SRAM; 25°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 17 · max 390 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; LSE bypass; 32 kHz; SRAM; 85°C; VDD typ 3.0 V, max 3.6 V; all peripherals disabled | typ 61 · max 426 uA | 46 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; 64 MHz; PLL enabled; Flash enabled; all peripherals disabled; 25°C | typ 2 · max 2.2 mA | 47 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; 64 MHz; PLL enabled; Flash enabled; all peripherals disabled; 85°C | typ 2.1 · max 2.5 mA | 47 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; 56 MHz; PLL enabled; Flash enabled; all peripherals disabled; 25°C | typ 1.8 · max 2 mA | 47 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; 56 MHz; PLL enabled; Flash enabled; all peripherals disabled; 85°C | typ 1.9 · max 2.3 mA | 47 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; 48 MHz; PLL enabled; Flash enabled; all peripherals disabled; 25°C | typ 1.5 · max 1.9 mA | 47 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; 48 MHz; PLL enabled; Flash enabled; all peripherals disabled; 85°C | typ 1.7 · max 2 mA | 47 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; 32 MHz; PLL enabled; Flash enabled; all peripherals disabled; 25°C | typ 1.1 · max 1.4 mA | 47 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; 32 MHz; PLL enabled; Flash enabled; all peripherals disabled; 85°C | typ 1.2 · max 1.6 mA | 47 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; 24 MHz; PLL enabled; Flash enabled; all peripherals disabled; 25°C | typ 0.9 · max 1.2 mA | 47 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; 24 MHz; PLL enabled; Flash enabled; all peripherals disabled; 85°C | typ 1 · max 1.3 mA | 47 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; 16 MHz; HSE bypass; PLL disabled; Flash enabled; all peripherals disabled; 25°C | typ 0.6 · max 0.7 mA | 47 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; 16 MHz; HSE bypass; PLL disabled; Flash enabled; all peripherals disabled; 85°C | typ 0.7 · max 0.8 mA | 47 |
| Supply current in Sleep mode IDD(Sleep) | Range 2; 16 MHz; HSE bypass; PLL disabled; Flash enabled; all peripherals disabled; 25°C | typ 0.4 · max 0.6 mA | 47 |
| Supply current in Sleep mode IDD(Sleep) | Range 2; 16 MHz; HSE bypass; PLL disabled; Flash enabled; all peripherals disabled; 85°C | typ 0.6 · max 0.7 mA | 47 |
| Supply current in Sleep mode IDD(Sleep) | Range 2; 8 MHz; HSE bypass; PLL disabled; Flash enabled; all peripherals disabled; 25°C | typ 0.3 · max 0.4 mA | 47 |
| Supply current in Sleep mode IDD(Sleep) | Range 2; 8 MHz; HSE bypass; PLL disabled; Flash enabled; all peripherals disabled; 85°C | typ 0.3 · max 0.6 mA | 47 |
| Supply current in Sleep mode IDD(Sleep) | Range 2; 2 MHz; HSE bypass; PLL disabled; Flash enabled; all peripherals disabled; 25°C | typ 0.1 · max 0.2 mA | 47 |
| Supply current in Sleep mode IDD(Sleep) | Range 2; 2 MHz; HSE bypass; PLL disabled; Flash enabled; all peripherals disabled; 85°C | typ 0.2 · max 0.5 mA | 47 |
| Supply current in Low-power sleep mode IDD(LPSleep) | 2 MHz; HSE bypass; PLL disabled; Flash disabled; all peripherals disabled; 25°C | typ 65 · max 180 uA | 47 |
| Supply current in Low-power sleep mode IDD(LPSleep) | 2 MHz; HSE bypass; PLL disabled; Flash disabled; all peripherals disabled; 85°C | typ 108 · max 432 uA | 47 |
| Supply current in Low-power sleep mode IDD(LPSleep) | 1 MHz; HSE bypass; PLL disabled; Flash disabled; all peripherals disabled; 25°C | typ 36 · max 156 uA | 47 |
| Supply current in Low-power sleep mode IDD(LPSleep) | 1 MHz; HSE bypass; PLL disabled; Flash disabled; all peripherals disabled; 85°C | typ 83 · max 396 uA | 47 |
| Supply current in Low-power sleep mode IDD(LPSleep) | 500 kHz; HSE bypass; PLL disabled; Flash disabled; all peripherals disabled; 25°C | typ 27 · max 150 uA | 47 |
| Supply current in Low-power sleep mode IDD(LPSleep) | 500 kHz; HSE bypass; PLL disabled; Flash disabled; all peripherals disabled; 85°C | typ 70 · max 300 uA | 47 |
| Supply current in Low-power sleep mode IDD(LPSleep) | 125 kHz; HSE bypass; PLL disabled; Flash disabled; all peripherals disabled; 25°C | typ 17 · max 132 uA | 47 |
| Supply current in Low-power sleep mode IDD(LPSleep) | 125 kHz; HSE bypass; PLL disabled; Flash disabled; all peripherals disabled; 85°C | typ 61 · max 282 uA | 47 |
| Supply current in Low-power sleep mode IDD(LPSleep) | 32 kHz; LSE bypass; PLL disabled; Flash disabled; all peripherals disabled; 25°C | typ 15 · max 132 uA | 47 |
| Supply current in Low-power sleep mode IDD(LPSleep) | 32 kHz; LSE bypass; PLL disabled; Flash disabled; all peripherals disabled; 85°C | typ 58 · max 270 uA | 47 |
| Supply current in Stop 0 mode IDD(Stop 0) | VDD = 2.4 V; 25 °C | typ 110 · max 150 uA | 47 |
| Supply current in Stop 0 mode IDD(Stop 0) | VDD = 2.4 V; 85 °C | typ 160 · max 264 uA | 47 |
| Supply current in Stop 0 mode IDD(Stop 0) | VDD = 3 V; 25 °C | typ 110 · max 150 uA | 47 |
| Supply current in Stop 0 mode IDD(Stop 0) | VDD = 3 V; 85 °C | typ 160 · max 288 uA | 47 |
| Supply current in Stop 0 mode IDD(Stop 0) | VDD = 3.6 V; 25 °C | typ 116 · max 156 uA | 47 |
| Supply current in Stop 0 mode IDD(Stop 0) | VDD = 3.6 V; 85 °C | typ 165 · max 300 uA | 47 |
| Supply current in Stop 1 mode IDD(Stop 1) | RTC disabled; Flash not powered; VDD = 2.4 V; 25 °C | typ 3.6 · max 12 uA | 47 |
| Supply current in Stop 1 mode IDD(Stop 1) | RTC disabled; Flash not powered; VDD = 2.4 V; 85 °C | typ 35 · max 144 uA | 47 |
| Supply current in Stop 1 mode IDD(Stop 1) | RTC disabled; Flash not powered; VDD = 3 V; 25 °C | typ 3.7 · max 18 uA | 47 |
| Supply current in Stop 1 mode IDD(Stop 1) | RTC disabled; Flash not powered; VDD = 3 V; 85 °C | typ 36 · max 162 uA | 47 |
| Supply current in Stop 1 mode IDD(Stop 1) | RTC disabled; Flash not powered; VDD = 3.6 V; 25 °C | typ 4.2 · max 22 uA | 47 |
| Supply current in Stop 1 mode IDD(Stop 1) | RTC disabled; Flash not powered; VDD = 3.6 V; 85 °C | typ 36 · max 168 uA | 47 |
| Supply current in Stop 1 mode IDD(Stop 1) | RTC enabled, LSE bypass; Flash not powered; VDD = 2.4 V; 25 °C | typ 4.1 · max 13 uA | 47 |
| Supply current in Stop 1 mode IDD(Stop 1) | RTC enabled, LSE bypass; Flash not powered; VDD = 2.4 V; 85 °C | typ 35 · max 144 uA | 47 |
| Supply current in Stop 1 mode IDD(Stop 1) | RTC enabled, LSE bypass; Flash not powered; VDD = 3 V; 25 °C | typ 4.4 · max 19 uA | 47 |
| Supply current in Stop 1 mode IDD(Stop 1) | RTC enabled, LSE bypass; Flash not powered; VDD = 3 V; 85 °C | typ 36 · max 168 uA | 47 |
| Supply current in Stop 1 mode IDD(Stop 1) | RTC enabled, LSE bypass; Flash not powered; VDD = 3.6 V; 25 °C | typ 4.8 · max 24 uA | 47 |
| Supply current in Stop 1 mode IDD(Stop 1) | RTC enabled, LSE bypass; Flash not powered; VDD = 3.6 V; 85 °C | typ 37 · max 174 uA | 47 |
| Supply current in Standby mode IDD(Standby) | RTC disabled; VDD = 2.4 V; 25 °C | typ 1 · max 2.7 uA | 48 |
| Supply current in Standby mode IDD(Standby) | RTC disabled; VDD = 2.4 V; 85 °C | typ 2.2 · max 14 uA | 48 |
| Supply current in Standby mode IDD(Standby) | RTC disabled; VDD = 3.0 V; 25 °C | typ 1.2 · max 3.5 uA | 48 |
| Supply current in Standby mode IDD(Standby) | RTC disabled; VDD = 3.0 V; 85 °C | typ 2.6 · max 17 uA | 48 |
| Supply current in Standby mode IDD(Standby) | RTC disabled; VDD = 3.6 V; 25 °C | typ 1.4 · max 4.1 uA | 48 |
| Supply current in Standby mode IDD(Standby) | RTC disabled; VDD = 3.6 V; 85 °C | typ 3.2 · max 19 uA | 48 |
| Supply current in Standby mode IDD(Standby) | RTC enabled, clocked by LSI; VDD = 2.4 V; 25 °C | typ 1.5 · max 3.5 uA | 48 |
| Supply current in Standby mode IDD(Standby) | RTC enabled, clocked by LSI; VDD = 2.4 V; 85 °C | typ 2.8 · max 17 uA | 48 |
| Supply current in Standby mode IDD(Standby) | RTC enabled, clocked by LSI; VDD = 3.0 V; 25 °C | typ 1.8 · max 4.6 uA | 48 |
| Supply current in Standby mode IDD(Standby) | RTC enabled, clocked by LSI; VDD = 3.0 V; 85 °C | typ 3.3 · max 21 uA | 48 |
| Supply current in Standby mode IDD(Standby) | RTC enabled, clocked by LSI; VDD = 3.6 V; 25 °C | typ 2.2 · max 6.4 uA | 48 |
| Supply current in Standby mode IDD(Standby) | RTC enabled, clocked by LSI; VDD = 3.6 V; 85 °C | typ 4.1 · max 25 uA | 48 |
| Supply current in VBAT mode IDD_VBAT | RTC enabled, LSE bypass at 32.768 kHz; VBAT = 2.4 V; 25 °C | typ 286 nA | 48 |
| Supply current in VBAT mode IDD_VBAT | RTC enabled, LSE bypass at 32.768 kHz; VBAT = 2.4 V; 85 °C | typ 391 nA | 48 |
| Supply current in VBAT mode IDD_VBAT | RTC enabled, LSE bypass at 32.768 kHz; VBAT = 3.0 V; 25 °C | typ 402 nA | 48 |
| Supply current in VBAT mode IDD_VBAT | RTC enabled, LSE bypass at 32.768 kHz; VBAT = 3.0 V; 85 °C | typ 523 nA | 48 |
| Supply current in VBAT mode IDD_VBAT | RTC enabled, LSE bypass at 32.768 kHz; VBAT = 3.6 V; 25 °C | typ 556 nA | 48 |
| Supply current in VBAT mode IDD_VBAT | RTC enabled, LSE bypass at 32.768 kHz; VBAT = 3.6 V; 85 °C | typ 721 nA | 48 |
| Supply current in VBAT mode IDD_VBAT | RTC enabled, LSE crystal at 32.768 kHz; VBAT = 2.4 V; 25 °C | typ 407 nA | 48 |
| Supply current in VBAT mode IDD_VBAT | RTC enabled, LSE crystal at 32.768 kHz; VBAT = 2.4 V; 85 °C | typ 528 nA | 48 |
| Supply current in VBAT mode IDD_VBAT | RTC enabled, LSE crystal at 32.768 kHz; VBAT = 3.0 V; 25 °C | typ 517 nA | 48 |
| Supply current in VBAT mode IDD_VBAT | RTC enabled, LSE crystal at 32.768 kHz; VBAT = 3.0 V; 85 °C | typ 660 nA | 48 |
| Supply current in VBAT mode IDD_VBAT | RTC enabled, LSE crystal at 32.768 kHz; VBAT = 3.6 V; 25 °C | typ 660 nA | 48 |
| Supply current in VBAT mode IDD_VBAT | RTC enabled, LSE crystal at 32.768 kHz; VBAT = 3.6 V; 85 °C | typ 897 nA | 48 |
| Output low level voltage for an I/O pin VOL | CMOS port; |IIO| = 2 mA for FT_c, 6 mA for other I/Os; VDDIO1 ≥ 2.7 V | max 0.4 V | 64 |
| Output low level voltage for an I/O pin VOL | TTL port; |IIO| = 2 mA for FT_c, 6 mA for other I/Os; VDDIO1 ≥ 2.7 V | max 0.4 V | 64 |
| Output high level voltage for an I/O pin VOH | TTL port; |IIO| = 2 mA for FT_c, 6 mA for other I/Os; VDDIO1 ≥ 2.7 V | min 2.4 V | 64 |
| Output low level voltage for an I/O pin VOL | All I/Os except FT_c; |IIO| = 15 mA; VDDIO1 ≥ 2.7 V | max 1.3 V | 64 |
| Output low level voltage for an I/O pin VOL | |IIO| = 1 mA for FT_c, 3 mA for other I/Os | max 0.4 V | 64 |
| Output low level voltage for an FT I/O pin in FM+ mode (FT I/O with _f option) VOLFM+ | |IIO| = 20 mA; VDDIO1 ≥ 2.7 V | max 0.4 V | 64 |
| Output low level voltage for an FT I/O pin in FM+ mode (FT I/O with _f option) VOLFM+ | |IIO| = 9 mA | max 0.4 V | 64 |
| Maximum frequency Fmax | Speed 00; C=50 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V | max 2 MHz | 64 |
| Maximum frequency Fmax | Speed 00; C=50 pF, 2.0 V ≤ VDDIO1 ≤ 2.7 V | max 0.35 MHz | 64 |
| Maximum frequency Fmax | Speed 00; C=10 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V | max 3 MHz | 64 |
| Maximum frequency Fmax | Speed 00; C=10 pF, 2.0 V ≤ VDDIO1 ≤ 2.7 V | max 0.45 MHz | 64 |
| Output rise and fall time Tr/Tf | Speed 00; C=50 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V | max 100 ns | 64 |
| Output rise and fall time Tr/Tf | Speed 00; C=50 pF, 2.0 V ≤ VDDIO1 ≤ 2.7 V | max 225 ns | 64 |
| Output rise and fall time Tr/Tf | Speed 00; C=10 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V | max 75 ns | 64 |
| Output rise and fall time Tr/Tf | Speed 00; C=10 pF, 2.0 V ≤ VDDIO1 ≤ 2.7 V | max 150 ns | 64 |
| Thermal resistance junction-ambient ΘJA | LQFP64 10 × 10 mm | typ 65 °C/W | 90 |
| External supply voltage VDD | min -0.3 · max 4 V | 42 | |
| External supply voltage on VBAT pin VBAT | min -0.3 · max 4 V | 42 | |
| External voltage on VREF+ pin VREF+ | min -0.3 V | 42 | |
| Input voltage on FT_xx pins except FT_c VIN | Internal pull-up/pull-down resistors disabled for voltage higher than 4 V | min -0.3 V | 42 |
| Total injected current (sum of all I/Os and control pins) ∑|IINJ(PIN)| | Absolute sum of negative injected currents, instantaneous values | max 25 mA | 42 |
| Maximum junction temperature TJ | Absolute maximum | max 150 °C | 43 |
| I/O input voltage VIN | Internal pull-up and pull-down resistors disabled for voltage higher than VDD +0.3 V | min -0.3 V | 43 |
| VDD slew rate tVDD | VDD falling | min 10 us/V | 43 |
| POR temporization when VDD crosses VPOR tRSTTEMPO | VDD rising; guaranteed by design | typ 250 · max 400 us | 44 |
| Power-on reset threshold VPOR | Guaranteed by design | min 2.06 · typ 2.1 · max 2.14 V | 44 |
| Power-down reset threshold VPDR | Guaranteed by design | min 1.96 · typ 2 · max 2.04 V | 44 |
| ADC sampling time when reading the internal reference voltage tS_vrefint | Guaranteed by design | min 4 us | 44 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 64 MHz; Flash memory; 25°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 6.9 · max 8 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 64 MHz; Flash memory; 85°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 7 · max 8.4 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 56 MHz; Flash memory; 25°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 6.1 · max 7.1 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 56 MHz; Flash memory; 85°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 6.3 · max 7.6 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 48 MHz; Flash memory; 25°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 5.5 · max 6.2 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 48 MHz; Flash memory; 85°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 5.6 · max 6.8 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 32 MHz; Flash memory; 25°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 3.9 · max 4.8 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 32 MHz; Flash memory; 85°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 4 · max 5.2 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 24 MHz; Flash memory; 25°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 3.1 · max 3.7 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 24 MHz; Flash memory; 85°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 3.2 · max 4.3 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; fHCLK = fHSI bypass; 16 MHz; Flash memory; 25°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 2 · max 2.5 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; fHCLK = fHSI bypass; 16 MHz; Flash memory; 85°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 2.1 · max 3 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 64 MHz; SRAM; 25°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 6.6 · max 7.6 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 64 MHz; SRAM; 85°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 6.8 · max 7.9 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 56 MHz; SRAM; 25°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 5.8 · max 6.7 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 56 MHz; SRAM; 85°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 6.1 · max 7 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 48 MHz; SRAM; 25°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 5.2 · max 6 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 48 MHz; SRAM; 85°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 5.3 · max 6.2 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 32 MHz; SRAM; 25°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 3.6 · max 4.2 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 32 MHz; SRAM; 85°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 3.7 · max 4.6 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 24 MHz; SRAM; 25°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 2.9 · max 3.4 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 24 MHz; SRAM; 85°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 3 · max 3.7 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; fHCLK = fHSI bypass; 16 MHz; SRAM; 25°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 1.9 · max 2.3 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 1; fHCLK = fHSI bypass; 16 MHz; SRAM; 85°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 1.9 · max 2.5 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 2; fHCLK = fHSI bypass; 16 MHz; Flash memory; 25°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 1.5 · max 2 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 2; fHCLK = fHSI bypass; 16 MHz; Flash memory; 85°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 1.7 · max 2.4 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 2; fHCLK = fHSI bypass; 8 MHz; Flash memory; 25°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 0.9 · max 1.4 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 2; fHCLK = fHSI bypass; 8 MHz; Flash memory; 85°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 1 · max 1.6 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 2; fHCLK = fHSI bypass; 2 MHz; Flash memory; 25°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 0.3 · max 0.6 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 2; fHCLK = fHSI bypass; 2 MHz; Flash memory; 85°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 0.3 · max 1 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 2; fHCLK = fHSI bypass; 16 MHz; SRAM; 25°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 1.5 · max 1.9 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 2; fHCLK = fHSI bypass; 16 MHz; SRAM; 85°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 1.5 · max 2.2 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 2; fHCLK = fHSI bypass; 8 MHz; SRAM; 25°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 0.8 · max 1.3 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 2; fHCLK = fHSI bypass; 8 MHz; SRAM; 85°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 0.9 · max 1.4 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 2; fHCLK = fHSI bypass; 4 MHz; SRAM; 25°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 0.4 · max 0.8 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 2; fHCLK = fHSI bypass; 4 MHz; SRAM; 85°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 0.6 · max 1.1 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 2; fHCLK = fHSI bypass; 2 MHz; SRAM; 25°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 0.3 · max 0.6 mA | 46 |
| Supply current in Run mode IDD(Run) | Range 2; fHCLK = fHSI bypass; 2 MHz; SRAM; 85°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 0.3 · max 1 mA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; HSE bypass; 2 MHz; Flash memory; 25°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 242 · max 636 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; HSE bypass; 2 MHz; Flash memory; 85°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 281 · max 954 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; HSE bypass; 1 MHz; Flash memory; 25°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 116 · max 606 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; HSE bypass; 1 MHz; Flash memory; 85°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 171 · max 924 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; HSE bypass; 500 kHz; Flash memory; 25°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 74 · max 558 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; HSE bypass; 500 kHz; Flash memory; 85°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 116 · max 840 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; HSE bypass; 125 kHz; Flash memory; 25°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 29 · max 540 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; HSE bypass; 125 kHz; Flash memory; 85°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 73 · max 624 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; LSE bypass; 32 kHz; Flash memory; 25°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 19 · max 450 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; LSE bypass; 32 kHz; Flash memory; 85°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 62 · max 570 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; HSE bypass; 2 MHz; SRAM; 25°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 219 · max 582 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; HSE bypass; 2 MHz; SRAM; 85°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 254 · max 840 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; HSE bypass; 1 MHz; SRAM; 25°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 105 · max 516 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; HSE bypass; 1 MHz; SRAM; 85°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 154 · max 792 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; HSE bypass; 500 kHz; SRAM; 25°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 67 · max 438 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; HSE bypass; 500 kHz; SRAM; 85°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 105 · max 750 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; HSE bypass; 125 kHz; SRAM; 25°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 26 · max 402 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; HSE bypass; 125 kHz; SRAM; 85°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 65 · max 528 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; LSE bypass; 32 kHz; SRAM; 25°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 17 · max 390 uA | 46 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; LSE bypass; 32 kHz; SRAM; 85°C; typ VDD = 3.0 V, max VDD = 3.6 V; all peripherals disabled | typ 61 · max 426 uA | 46 |
| Supply current in Sleep mode IDD(Sleep) | Flash memory enabled; Range 1; PLL enabled; 64 MHz; all peripherals disabled; 25°C | typ 2 · max 2.2 mA | 47 |
| Supply current in Sleep mode IDD(Sleep) | Flash memory enabled; Range 1; PLL enabled; 64 MHz; all peripherals disabled; 85°C | typ 2.1 · max 2.5 mA | 47 |
| Supply current in Sleep mode IDD(Sleep) | Flash memory enabled; Range 1; PLL enabled; 56 MHz; all peripherals disabled; 25°C | typ 1.8 · max 2 mA | 47 |
| Supply current in Sleep mode IDD(Sleep) | Flash memory enabled; Range 1; PLL enabled; 56 MHz; all peripherals disabled; 85°C | typ 1.9 · max 2.3 mA | 47 |
| Supply current in Sleep mode IDD(Sleep) | Flash memory enabled; Range 1; PLL enabled; 48 MHz; all peripherals disabled; 25°C | typ 1.5 · max 1.9 mA | 47 |
| Supply current in Sleep mode IDD(Sleep) | Flash memory enabled; Range 1; PLL enabled; 48 MHz; all peripherals disabled; 85°C | typ 1.7 · max 2 mA | 47 |
| Supply current in Sleep mode IDD(Sleep) | Flash memory enabled; Range 1; PLL enabled; 32 MHz; all peripherals disabled; 25°C | typ 1.1 · max 1.4 mA | 47 |
| Supply current in Sleep mode IDD(Sleep) | Flash memory enabled; Range 1; PLL enabled; 32 MHz; all peripherals disabled; 85°C | typ 1.2 · max 1.6 mA | 47 |
| Supply current in Sleep mode IDD(Sleep) | Flash memory enabled; Range 1; PLL enabled; 24 MHz; all peripherals disabled; 25°C | typ 0.9 · max 1.2 mA | 47 |
| Supply current in Sleep mode IDD(Sleep) | Flash memory enabled; Range 1; PLL enabled; 24 MHz; all peripherals disabled; 85°C | typ 1 · max 1.3 mA | 47 |
| Supply current in Sleep mode IDD(Sleep) | Flash memory enabled; Range 1; HSE bypass; PLL disabled; 16 MHz; all peripherals disabled; 25°C | typ 0.6 · max 0.7 mA | 47 |
| Supply current in Sleep mode IDD(Sleep) | Flash memory enabled; Range 1; HSE bypass; PLL disabled; 16 MHz; all peripherals disabled; 85°C | typ 0.7 · max 0.8 mA | 47 |
| Supply current in Sleep mode IDD(Sleep) | Flash memory enabled; Range 2; HSE bypass; PLL disabled; 16 MHz; all peripherals disabled; 25°C | typ 0.4 · max 0.6 mA | 47 |
| Supply current in Sleep mode IDD(Sleep) | Flash memory enabled; Range 2; HSE bypass; PLL disabled; 16 MHz; all peripherals disabled; 85°C | typ 0.6 · max 0.7 mA | 47 |
| Supply current in Sleep mode IDD(Sleep) | Flash memory enabled; Range 2; HSE bypass; PLL disabled; 8 MHz; all peripherals disabled; 25°C | typ 0.3 · max 0.4 mA | 47 |
| Supply current in Sleep mode IDD(Sleep) | Flash memory enabled; Range 2; HSE bypass; PLL disabled; 8 MHz; all peripherals disabled; 85°C | typ 0.3 · max 0.6 mA | 47 |
| Supply current in Sleep mode IDD(Sleep) | Flash memory enabled; Range 2; HSE bypass; PLL disabled; 2 MHz; all peripherals disabled; 25°C | typ 0.1 · max 0.2 mA | 47 |
| Supply current in Sleep mode IDD(Sleep) | Flash memory enabled; Range 2; HSE bypass; PLL disabled; 2 MHz; all peripherals disabled; 85°C | typ 0.2 · max 0.5 mA | 47 |
| Supply current in Low-power sleep mode IDD(LPSleep) | Flash memory disabled; PLL disabled; HSE bypass; 2 MHz; all peripherals disabled; 25°C | typ 65 · max 180 uA | 47 |
| Supply current in Low-power sleep mode IDD(LPSleep) | Flash memory disabled; PLL disabled; HSE bypass; 2 MHz; all peripherals disabled; 85°C | typ 108 · max 432 uA | 47 |
| Supply current in Low-power sleep mode IDD(LPSleep) | Flash memory disabled; PLL disabled; HSE bypass; 1 MHz; all peripherals disabled; 25°C | typ 36 · max 156 uA | 47 |
| Supply current in Low-power sleep mode IDD(LPSleep) | Flash memory disabled; PLL disabled; HSE bypass; 1 MHz; all peripherals disabled; 85°C | typ 83 · max 396 uA | 47 |
| Supply current in Low-power sleep mode IDD(LPSleep) | Flash memory disabled; PLL disabled; HSE bypass; 500 kHz; all peripherals disabled; 25°C | typ 27 · max 150 uA | 47 |
| Supply current in Low-power sleep mode IDD(LPSleep) | Flash memory disabled; PLL disabled; HSE bypass; 500 kHz; all peripherals disabled; 85°C | typ 70 · max 300 uA | 47 |
| Supply current in Low-power sleep mode IDD(LPSleep) | Flash memory disabled; PLL disabled; HSE bypass; 125 kHz; all peripherals disabled; 25°C | typ 17 · max 132 uA | 47 |
| Supply current in Low-power sleep mode IDD(LPSleep) | Flash memory disabled; PLL disabled; HSE bypass; 125 kHz; all peripherals disabled; 85°C | typ 61 · max 282 uA | 47 |
| Supply current in Low-power sleep mode IDD(LPSleep) | Flash memory disabled; PLL disabled; LSE bypass; 32 kHz; all peripherals disabled; 25°C | typ 15 · max 132 uA | 47 |
| Supply current in Low-power sleep mode IDD(LPSleep) | Flash memory disabled; PLL disabled; LSE bypass; 32 kHz; all peripherals disabled; 85°C | typ 58 · max 270 uA | 47 |
| Supply current in Stop 0 mode IDD(Stop 0) | VDD = 2.4 V; 25°C | typ 110 · max 150 uA | 47 |
| Supply current in Stop 0 mode IDD(Stop 0) | VDD = 2.4 V; 85°C | typ 160 · max 264 uA | 47 |
| Supply current in Stop 0 mode IDD(Stop 0) | VDD = 3 V; 25°C | typ 110 · max 150 uA | 47 |
| Supply current in Stop 0 mode IDD(Stop 0) | VDD = 3 V; 85°C | typ 160 · max 288 uA | 47 |
| Supply current in Stop 0 mode IDD(Stop 0) | VDD = 3.6 V; 25°C | typ 116 · max 156 uA | 47 |
| Supply current in Stop 0 mode IDD(Stop 0) | VDD = 3.6 V; 85°C | typ 165 · max 300 uA | 47 |
| Supply current in Stop 1 mode IDD(Stop 1) | RTC disabled; Flash memory not powered; VDD = 2.4 V; 25°C | typ 3.6 · max 12 uA | 47 |
| Supply current in Stop 1 mode IDD(Stop 1) | RTC disabled; Flash memory not powered; VDD = 2.4 V; 85°C | typ 35 · max 144 uA | 47 |
| Supply current in Stop 1 mode IDD(Stop 1) | RTC disabled; Flash memory not powered; VDD = 3 V; 25°C | typ 3.7 · max 18 uA | 47 |
| Supply current in Stop 1 mode IDD(Stop 1) | RTC disabled; Flash memory not powered; VDD = 3 V; 85°C | typ 36 · max 162 uA | 47 |
| Supply current in Stop 1 mode IDD(Stop 1) | RTC disabled; Flash memory not powered; VDD = 3.6 V; 25°C | typ 4.2 · max 22 uA | 47 |
| Supply current in Stop 1 mode IDD(Stop 1) | RTC disabled; Flash memory not powered; VDD = 3.6 V; 85°C | typ 36 · max 168 uA | 47 |
| Supply current in Stop 1 mode IDD(Stop 1) | RTC enabled, clocked by LSE bypass; Flash memory not powered; VDD = 2.4 V; 25°C | typ 4.1 · max 13 uA | 47 |
| Supply current in Stop 1 mode IDD(Stop 1) | RTC enabled, clocked by LSE bypass; Flash memory not powered; VDD = 2.4 V; 85°C | typ 35 · max 144 uA | 47 |
| Supply current in Stop 1 mode IDD(Stop 1) | RTC enabled, clocked by LSE bypass; Flash memory not powered; VDD = 3 V; 25°C | typ 4.4 · max 19 uA | 47 |
| Supply current in Stop 1 mode IDD(Stop 1) | RTC enabled, clocked by LSE bypass; Flash memory not powered; VDD = 3 V; 85°C | typ 36 · max 168 uA | 47 |
| Supply current in Stop 1 mode IDD(Stop 1) | RTC enabled, clocked by LSE bypass; Flash memory not powered; VDD = 3.6 V; 25°C | typ 4.8 · max 24 uA | 47 |
| Supply current in Stop 1 mode IDD(Stop 1) | RTC enabled, clocked by LSE bypass; Flash memory not powered; VDD = 3.6 V; 85°C | typ 37 · max 174 uA | 47 |
| Supply current in Standby mode IDD(Standby) | RTC disabled; VDD = 2.4 V; 25°C | typ 1 · max 2.7 uA | 48 |
| Supply current in Standby mode IDD(Standby) | RTC disabled; VDD = 2.4 V; 85°C | typ 2.2 · max 14 uA | 48 |
| Supply current in Standby mode IDD(Standby) | RTC disabled; VDD = 3.0 V; 25°C | typ 1.2 · max 3.5 uA | 48 |
| Supply current in Standby mode IDD(Standby) | RTC disabled; VDD = 3.0 V; 85°C | typ 2.6 · max 17 uA | 48 |
| Supply current in Standby mode IDD(Standby) | RTC disabled; VDD = 3.6 V; 25°C | typ 1.4 · max 4.1 uA | 48 |
| Supply current in Standby mode IDD(Standby) | RTC disabled; VDD = 3.6 V; 85°C | typ 3.2 · max 19 uA | 48 |
| Supply current in Standby mode IDD(Standby) | RTC enabled, clocked by LSI; VDD = 2.4 V; 25°C | typ 1.5 · max 3.5 uA | 48 |
| Supply current in Standby mode IDD(Standby) | RTC enabled, clocked by LSI; VDD = 2.4 V; 85°C | typ 2.8 · max 17 uA | 48 |
| Supply current in Standby mode IDD(Standby) | RTC enabled, clocked by LSI; VDD = 3.0 V; 25°C | typ 1.8 · max 4.6 uA | 48 |
| Supply current in Standby mode IDD(Standby) | RTC enabled, clocked by LSI; VDD = 3.0 V; 85°C | typ 3.3 · max 21 uA | 48 |
| Supply current in Standby mode IDD(Standby) | RTC enabled, clocked by LSI; VDD = 3.6 V; 25°C | typ 2.2 · max 6.4 uA | 48 |
| Supply current in Standby mode IDD(Standby) | RTC enabled, clocked by LSI; VDD = 3.6 V; 85°C | typ 4.1 · max 25 uA | 48 |
| Supply current in VBAT mode IDD_VBAT | RTC enabled, LSE bypass at 32.768 kHz; VBAT = 2.4 V; 25°C | typ 286 nA | 48 |
| Supply current in VBAT mode IDD_VBAT | RTC enabled, LSE bypass at 32.768 kHz; VBAT = 2.4 V; 85°C | typ 391 nA | 48 |
| Supply current in VBAT mode IDD_VBAT | RTC enabled, LSE bypass at 32.768 kHz; VBAT = 3.0 V; 25°C | typ 402 nA | 48 |
| Supply current in VBAT mode IDD_VBAT | RTC enabled, LSE bypass at 32.768 kHz; VBAT = 3.0 V; 85°C | typ 523 nA | 48 |
| Supply current in VBAT mode IDD_VBAT | RTC enabled, LSE bypass at 32.768 kHz; VBAT = 3.6 V; 25°C | typ 556 nA | 48 |
| Supply current in VBAT mode IDD_VBAT | RTC enabled, LSE bypass at 32.768 kHz; VBAT = 3.6 V; 85°C | typ 721 nA | 48 |
| Supply current in VBAT mode IDD_VBAT | RTC enabled, LSE crystal at 32.768 kHz; VBAT = 2.4 V; 25°C | typ 407 nA | 48 |
| Supply current in VBAT mode IDD_VBAT | RTC enabled, LSE crystal at 32.768 kHz; VBAT = 2.4 V; 85°C | typ 528 nA | 48 |
| Supply current in VBAT mode IDD_VBAT | RTC enabled, LSE crystal at 32.768 kHz; VBAT = 3.0 V; 25°C | typ 517 nA | 48 |
| Supply current in VBAT mode IDD_VBAT | RTC enabled, LSE crystal at 32.768 kHz; VBAT = 3.0 V; 85°C | typ 660 nA | 48 |
| Supply current in VBAT mode IDD_VBAT | RTC enabled, LSE crystal at 32.768 kHz; VBAT = 3.6 V; 25°C | typ 660 nA | 48 |
| Supply current in VBAT mode IDD_VBAT | RTC enabled, LSE crystal at 32.768 kHz; VBAT = 3.6 V; 85°C | typ 897 nA | 48 |
| IOPORT Bus | Bus IOPORT; Range 1 | typ 1 uA/MHz | 49 |
| IOPORT Bus | Bus IOPORT; Range 2 | typ 0.7 uA/MHz | 49 |
| IOPORT Bus | Bus IOPORT; Low-power run and sleep | typ 0.5 uA/MHz | 49 |
| GPIOA | Bus IOPORT; Range 1 | typ 3.4 uA/MHz | 49 |
| GPIOA | Bus IOPORT; Range 2 | typ 2.8 uA/MHz | 49 |
| GPIOA | Bus IOPORT; Low-power run and sleep | typ 3 uA/MHz | 49 |
| GPIOB | Bus IOPORT; Range 1 | typ 3.1 uA/MHz | 49 |
| GPIOB | Bus IOPORT; Range 2 | typ 2.6 uA/MHz | 49 |
| GPIOB | Bus IOPORT; Low-power run and sleep | typ 2.5 uA/MHz | 49 |
| GPIOC | Bus IOPORT; Range 1 | typ 2.9 uA/MHz | 49 |
| GPIOC | Bus IOPORT; Range 2 | typ 2.5 uA/MHz | 49 |
| GPIOC | Bus IOPORT; Low-power run and sleep | typ 3 uA/MHz | 49 |
| GPIOD | Bus IOPORT; Range 1 | typ 1.8 uA/MHz | 49 |
| GPIOD | Bus IOPORT; Range 2 | typ 1.5 uA/MHz | 49 |
| GPIOD | Bus IOPORT; Low-power run and sleep | typ 1.5 uA/MHz | 49 |
| GPIOF | Bus IOPORT; Range 1 | typ 0.7 uA/MHz | 49 |
| GPIOF | Bus IOPORT; Range 2 | typ 0.6 uA/MHz | 49 |
| GPIOF | Bus IOPORT; Low-power run and sleep | typ 1 uA/MHz | 49 |
| Bus matrix | Bus AHB; Range 1 | typ 3.2 uA/MHz | 49 |
| Bus matrix | Bus AHB; Range 2 | typ 2.2 uA/MHz | 49 |
| Bus matrix | Bus AHB; Low-power run and sleep | typ 2.8 uA/MHz | 49 |
| All AHB Peripherals | Bus AHB; Range 1 | typ 15 uA/MHz | 49 |
| All AHB Peripherals | Bus AHB; Range 2 | typ 12.5 uA/MHz | 49 |
| All AHB Peripherals | Bus AHB; Low-power run and sleep | typ 14 uA/MHz | 49 |
| Wakeup time from Sleep to Run mode tWUSLEEP | typ 11 · max 11 CPU cycles | 51 | |
| Wakeup time from Low-power sleep mode tWULPSLEEP | Transiting to Low-power-run-mode execution in Flash memory not powered in Low-power sleep mode; HCLK = HSI16 / 8 = 2 MHz | typ 11 · max 14 CPU cycles | 51 |
| Wakeup time from Stop 0 tWUSTOP0 | Transiting to Run-mode execution in Flash memory not powered in Stop 0 mode; HCLK = HSI16 = 16 MHz; Regulator in Range 1 or Range 2 | typ 5.6 · max 6 us | 51 |
| Wakeup time from Stop 0 tWUSTOP0 | Transiting to Run-mode execution in SRAM or in Flash memory powered in Stop 0 mode; HCLK = HSI16 = 16 MHz; Regulator in Range 1 or Range 2 | typ 2 · max 2.4 us | 51 |
| Wakeup time from Stop 1 tWUSTOP1 | Transiting to Run-mode execution in Flash memory not powered in Stop 1 mode; HCLK = HSI16 = 16 MHz; Regulator in Range 1 or Range 2 | typ 9 · max 11.2 us | 51 |
| Wakeup time from Stop 1 tWUSTOP1 | Transiting to Run-mode execution in SRAM or in Flash memory powered in Stop 1 mode; HCLK = HSI16 = 16 MHz; Regulator in Range 1 or Range 2 | typ 5 · max 7.5 us | 51 |
| Wakeup time from Stop 1 tWUSTOP1 | Transiting to Low-power-run-mode execution in Flash memory not powered in Stop 1 mode; HCLK = HSI16/8 = 2 MHz; Regulator in low-power mode (LPR = 1 in PWR_CR1) | typ 22 · max 25.3 us | 51 |
| Wakeup time from Stop 1 tWUSTOP1 | Transiting to Low-power-run-mode execution in SRAM or in Flash memory powered in Stop 1 mode; HCLK = HSI16 / 8 = 2 MHz; Regulator in low-power mode (LPR = 1 in PWR_CR1) | typ 18 · max 23.5 us | 51 |
| Wakeup time from Standby mode tWUSTBY | Transiting to Run mode; HCLK = HSI16 = 16 MHz; Regulator in Range 1 | typ 14.5 · max 30 us | 51 |
| Wakeup time from Low-power run mode tWULPRUN | Transiting to Run mode; HSISYS = HSI16/8 = 2 MHz; time until REGLPF flag is cleared in PWR_SR2 | typ 5 · max 7 us | 51 |
| User external clock source frequency fLSE_ext | Guaranteed by design | typ 32.768 · max 1000 kHz | 53 |
| OSC32_IN high or low time tw(LSEH), tw(LSEL) | Guaranteed by design | min 250 ns | 53 |
| Oscillator frequency fOSC_IN | Guaranteed by design | min 4 · typ 8 · max 48 MHz | 53 |
| Feedback resistor RF | Guaranteed by design | typ 200 kΩ | 53 |
| HSE current consumption IDD(HSE) | During startup; first 2/3 of tSU(HSE) startup time | max 5.5 mA | 54 |
| HSE current consumption IDD(HSE) | VDD = 3 V; Rm = 30 Ω; CL = 10 pF@8 MHz | typ 0.44 mA | 54 |
| HSE current consumption IDD(HSE) | VDD = 3 V; Rm = 45 Ω; CL = 10 pF@8 MHz | typ 0.45 mA | 54 |
| HSE current consumption IDD(HSE) | VDD = 3 V; Rm = 30 Ω; CL = 5 pF@48 MHz | typ 0.68 mA | 54 |
| HSE current consumption IDD(HSE) | VDD = 3 V; Rm = 30 Ω; CL = 10 pF@48 MHz | typ 0.94 mA | 54 |
| HSE current consumption IDD(HSE) | VDD = 3 V; Rm = 30 Ω; CL = 20 pF@48 MHz | typ 1.77 mA | 54 |
| Maximum critical crystal transconductance Gm | Startup | max 1.5 mA/V | 54 |
| Startup time tSU(HSE) | VDD is stabilized; standard 8 MHz crystal resonator | typ 2 ms | 54 |
| LSE current consumption IDD(LSE) | LSEDRV[1:0] = 00, Low drive capability | typ 250 nA | 55 |
| LSE current consumption IDD(LSE) | LSEDRV[1:0] = 01, Medium low drive capability | typ 315 nA | 55 |
| LSE current consumption IDD(LSE) | LSEDRV[1:0] = 10, Medium high drive capability | typ 500 nA | 55 |
| LSE current consumption IDD(LSE) | LSEDRV[1:0] = 11, High drive capability | typ 630 nA | 55 |
| Maximum critical crystal gm Gmcritmax | LSEDRV[1:0] = 00, Low drive capability | max 0.5 uA/V | 55 |
| Maximum critical crystal gm Gmcritmax | LSEDRV[1:0] = 01, Medium low drive capability | max 0.75 uA/V | 55 |
| Maximum critical crystal gm Gmcritmax | LSEDRV[1:0] = 10, Medium high drive capability | max 1.7 uA/V | 55 |
| Maximum critical crystal gm Gmcritmax | LSEDRV[1:0] = 11, High drive capability | max 2.7 uA/V | 55 |
| Startup time tSU(LSE) | VDD is stabilized | typ 2 s | 55 |
| HSI16 Frequency fHSI16 | VDD=3.0 V, TA=30 °C | min 15.88 · max 16.08 MHz | 56 |
| HSI16 oscillator frequency drift over temperature ∆Temp(HSI16) | TA= 0 to 85 °C | min -1 · max 1 % | 56 |
| HSI16 oscillator frequency drift over temperature ∆Temp(HSI16) | TA= -40 to 85 °C | min -2 · max 1.5 % | 56 |
| HSI16 oscillator frequency drift over VDD ∆VDD(HSI16) | VDD=VDD(min) to 3.6 V | min -0.1 · max 0.05 % | 56 |
| HSI16 frequency user trimming step TRIM | From code 127 to 128 | min -8 · typ -6 · max -4 % | 56 |
| HSI16 frequency user trimming step TRIM | From code 63 to 64; From code 191 to 192 | min -5.8 · typ -3.8 · max -1.8 % | 56 |
| HSI16 frequency user trimming step TRIM | For all other code increments | min 0.2 · typ 0.3 · max 0.4 % | 56 |
| Duty Cycle DHSI16 | min 45 · max 55 % | 56 | |
| HSI16 oscillator start-up time tsu(HSI16) | typ 0.8 · max 1.2 us | 56 | |
| PLL power consumption on VDD IDD(PLL) | VCO freq = 96 MHz | typ 200 · max 260 uA | 58 |
| PLL power consumption on VDD IDD(PLL) | VCO freq = 192 MHz | typ 300 · max 380 uA | 58 |
| PLL power consumption on VDD IDD(PLL) | VCO freq = 344 MHz | typ 520 · max 650 uA | 58 |
| 64-bit programming time tprog | typ 85 · max 125 us | 58 | |
| Row (32 double word) programming time tprog_row | Normal programming | typ 2.7 · max 4.6 ms | 58 |
| Row (32 double word) programming time tprog_row | Fast programming | typ 1.7 · max 2.8 ms | 58 |
| Page (2 Kbyte) programming time tprog_page | Normal programming | typ 21.8 · max 36.6 ms | 58 |
| Page (2 Kbyte) programming time tprog_page | Fast programming | typ 13.7 · max 22.4 ms | 58 |
| Page (2 Kbyte) erase time tERASE | typ 22 · max 40 ms | 58 | |
| Bank (128 Kbyte(2)) programming time tprog_bank | Normal programming | typ 1.4 · max 2.4 s | 58 |
| Bank (128 Kbyte(2)) programming time tprog_bank | Fast programming | typ 0.9 · max 1.4 s | 58 |
| Mass erase time tME | typ 22.1 · max 40.1 ms | 58 | |
| Average consumption from VDD IDD(FlashA) | Programming | typ 3 mA | 58 |
| Average consumption from VDD IDD(FlashA) | Page erase | typ 3 mA | 58 |
| Average consumption from VDD IDD(FlashA) | Mass erase | typ 3 mA | 58 |
| Maximum current (peak) IDD(FlashP) | Programming, 2 us peak duration | typ 7 mA | 58 |
| Maximum current (peak) IDD(FlashP) | Erase, 41 us peak duration | typ 7 mA | 58 |
| Endurance NEND | TA = -40 to +85 °C | min 1 kcycles | 58 |
| Data retention tRET | 1 kcycle at TA = 85 °C | min 15 Years | 58 |
| Peak level SEMI | VDD = 3.6 V, TA = 25 °C, LQFP64 package, compliant with IEC 61967-2; fHSE/fHCLK = 8 MHz / 64 MHz; 0.1 MHz to 30 MHz | max 7 dBuV | 60 |
| Peak level SEMI | VDD = 3.6 V, TA = 25 °C, LQFP64 package, compliant with IEC 61967-2; fHSE/fHCLK = 8 MHz / 64 MHz; 30 MHz to 130 MHz | max -1 dBuV | 60 |
| Peak level SEMI | VDD = 3.6 V, TA = 25 °C, LQFP64 package, compliant with IEC 61967-2; fHSE/fHCLK = 8 MHz / 64 MHz; 130 MHz to 1 GHz | max 8 dBuV | 60 |
| Peak level SEMI | VDD = 3.6 V, TA = 25 °C, LQFP64 package, compliant with IEC 61967-2; fHSE/fHCLK = 8 MHz / 64 MHz; 1 GHz to 2 GHz | max 7 dBuV | 60 |
| Peak level SEMI | VDD = 3.6 V, TA = 25 °C, LQFP64 package, compliant with IEC 61967-2; fHSE/fHCLK = 8 MHz / 64 MHz; EMI level | max 2.5 - | 60 |
| Electrostatic discharge voltage (human body model) VESD(HBM) | TA = +25 °C, conforming to ANSI/ESDA/JEDEC JS-001; Class 2 | max 2000 V | 60 |
| Electrostatic discharge voltage (charge device model) VESD(CDM) | TA = +25 °C, conforming to ANSI/ESDA/JEDEC JS-002; Class C2a | max 500 V | 60 |
| Injected current on pin IINJ | All except PA4, PA5, PA6, PB0, PB3, and PC0; Negative injection -5 mA; Positive injection N/A | min -5 mA | 61 |
| Injected current on pin IINJ | PA4, PA5; Negative injection -5 mA; Positive injection 0 mA | min -5 · max 0 mA | 61 |
| Injected current on pin IINJ | PA6, PB0, PB3, and PC0; Negative injection 0 mA; Positive injection N/A | min 0 mA | 61 |
| Output low level voltage for an I/O pin VOL | CMOS port; |IIO| = 2 mA for FT_c I/Os, 6 mA for other I/Os; VDDIO1 ≥ 2.7 V | max 0.4 V | 64 |
| Output low level voltage for an I/O pin VOL | TTL port; |IIO| = 2 mA for FT_c I/Os, 6 mA for other I/Os; VDDIO1 ≥ 2.7 V | max 0.4 V | 64 |
| Output high level voltage for an I/O pin VOH | TTL port; |IIO| = 2 mA for FT_c I/Os, 6 mA for other I/Os; VDDIO1 ≥ 2.7 V | min 2.4 V | 64 |
| Output low level voltage for an I/O pin VOL | |IIO| = 1 mA for FT_c I/Os, 3 mA for other I/Os | max 0.4 V | 64 |
| Maximum frequency Fmax | Speed 01; C=50 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V | max 10 MHz | 65 |
| Maximum frequency Fmax | Speed 01; C=50 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 V | max 2 MHz | 65 |
| Maximum frequency Fmax | Speed 01; C=10 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V | max 15 MHz | 65 |
| Maximum frequency Fmax | Speed 01; C=10 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 V | max 2.5 MHz | 65 |
| Output rise and fall time Tr/Tf | Speed 01; C=50 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V | max 30 ns | 65 |
| Output rise and fall time Tr/Tf | Speed 01; C=50 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 V | max 60 ns | 65 |
| Output rise and fall time Tr/Tf | Speed 01; C=10 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V | max 15 ns | 65 |
| Output rise and fall time Tr/Tf | Speed 01; C=10 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 V | max 30 ns | 65 |
| Maximum frequency Fmax | Speed 10; C=50 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V | max 30 MHz | 65 |
| Maximum frequency Fmax | Speed 10; C=50 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 V | max 15 MHz | 65 |
| Maximum frequency Fmax | Speed 10; C=10 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V | max 60 MHz | 65 |
| Maximum frequency Fmax | Speed 10; C=10 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 V | max 30 MHz | 65 |
| Output rise and fall time Tr/Tf | Speed 10; C=50 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V | max 11 ns | 65 |
| Output rise and fall time Tr/Tf | Speed 10; C=50 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 V | max 22 ns | 65 |
| Output rise and fall time Tr/Tf | Speed 10; C=10 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V | max 4 ns | 65 |
| Output rise and fall time Tr/Tf | Speed 10; C=10 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 V | max 8 ns | 65 |
| Maximum frequency Fmax | Speed 11; C=30 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V | max 60 MHz | 65 |
| Maximum frequency Fmax | Speed 11; C=30 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 V | max 30 MHz | 65 |
| Maximum frequency Fmax | Speed 11; C=10 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V; I/O capability, maximum system frequency limited to 64 MHz | max 80 MHz | 65 |
| Maximum frequency Fmax | Speed 11; C=10 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 V | max 40 MHz | 65 |
| Output rise and fall time Tr/Tf | Speed 11; C=30 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V | max 5.5 ns | 65 |
| Output rise and fall time Tr/Tf | Speed 11; C=30 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 V | max 11 ns | 65 |
| Output rise and fall time Tr/Tf | Speed 11; C=10 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V | max 2.5 ns | 65 |
| Output rise and fall time Tr/Tf | Speed 11; C=10 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 V | max 5 ns | 65 |
| Maximum frequency Fmax | Fm+; C=50 pF, 1.6 V ≤ VDDIO1 ≤ 3.6 V | max 1 MHz | 65 |
| Output fall time Tf | Fm+; C=50 pF, 1.6 V ≤ VDDIO1 ≤ 3.6 V; fall time defined between 70% and 30% | max 5 ns | 65 |
| NRST Schmitt trigger voltage hysteresis Vhys(NRST) | typ 200 mV | 66 | |
| Weak pull-up equivalent resistor RPU | VIN = VSS | min 25 · typ 40 · max 55 kΩ | 66 |
| NRST input filtered pulse VF(NRST) | max 70 ns | 66 | |
| NRST input not filtered pulse VNF(NRST) | 2.0 V ≤ VDD ≤ 3.6 V | min 350 ns | 66 |
| Supply voltage VDD | Minimum VDD(min) | max 3.6 V | 67 |
| Booster startup time tSU(BOOST) | max 240 us | 67 | |
| Booster consumption for VDD ≤ 2.7 V | VDD ≤ 2.7 V; unit not stated in supplied table | max 500 | 67 |
| Booster consumption for 2.7 V ≤ VDD ≤ 3.6 V | 2.7 V ≤ VDD ≤ 3.6 V; unit not stated in supplied table | max 900 | 67 |
| Analog supply voltage VDDA | min 2 · max 3.6 V | 67 | |
| Positive reference voltage VREF+ | Maximum VDDA | min 2 V | 67 |
| ADC clock frequency fADC | Range 1 | min 0.14 · max 35 MHz | 67 |
| ADC clock frequency fADC | Range 2 | min 0.14 · max 16 MHz | 67 |
| ADC consumption from VREF+ IDDV(ADC) | fs = 2.5 MSps | typ 65 uA | 69 |
| ADC consumption from VREF+ IDDV(ADC) | fs = 1 MSps | typ 26 uA | 69 |
| ADC consumption from VREF+ IDDV(ADC) | fs = 10 kSps | typ 0.26 uA | 69 |
| Max. RAIN RAIN | 12 bits; sampling cycle 1.5 at 35 MHz; sampling time 43 ns | max 50 Ω | 69 |
| Max. RAIN RAIN | 12 bits; sampling cycle 3.5 at 35 MHz; sampling time 100 ns | max 680 Ω | 69 |
| Max. RAIN RAIN | 12 bits; sampling cycle 7.5 at 35 MHz; sampling time 214 ns | max 2200 Ω | 69 |
| Max. RAIN RAIN | 12 bits; sampling cycle 12.5 at 35 MHz; sampling time 357 ns | max 4700 Ω | 69 |
| Max. RAIN RAIN | 12 bits; sampling cycle 19.5 at 35 MHz; sampling time 557 ns | max 8200 Ω | 69 |
| Max. RAIN RAIN | 12 bits; sampling cycle 39.5 at 35 MHz; sampling time 1129 ns | max 15000 Ω | 69 |
| Max. RAIN RAIN | 12 bits; sampling cycle 79.5 at 35 MHz; sampling time 2271 ns | max 33000 Ω | 69 |
| Max. RAIN RAIN | 12 bits; sampling cycle 160.5 at 35 MHz; sampling time 4586 ns | max 50000 Ω | 69 |
| Max. RAIN RAIN | 10 bits; sampling cycle 1.5 at 35 MHz; sampling time 43 ns | max 68 Ω | 69 |
| Max. RAIN RAIN | 10 bits; sampling cycle 3.5 at 35 MHz; sampling time 100 ns | max 820 Ω | 69 |
| Max. RAIN RAIN | 10 bits; sampling cycle 7.5 at 35 MHz; sampling time 214 ns | max 3300 Ω | 69 |
| Max. RAIN RAIN | 10 bits; sampling cycle 12.5 at 35 MHz; sampling time 357 ns | max 5600 Ω | 69 |
| Max. RAIN RAIN | 10 bits; sampling cycle 19.5 at 35 MHz; sampling time 557 ns | max 10000 Ω | 69 |
| Max. RAIN RAIN | 10 bits; sampling cycle 39.5 at 35 MHz; sampling time 1129 ns | max 22000 Ω | 69 |
| Max. RAIN RAIN | 10 bits; sampling cycle 79.5 at 35 MHz; sampling time 2271 ns | max 39000 Ω | 69 |
| Max. RAIN RAIN | 10 bits; sampling cycle 160.5 at 35 MHz; sampling time 4586 ns | max 50000 Ω | 69 |
| Max. RAIN RAIN | 8 bits; sampling cycle 1.5 at 35 MHz; sampling time 43 ns | max 82 Ω | 69 |
| Max. RAIN RAIN | 8 bits; sampling cycle 3.5 at 35 MHz; sampling time 100 ns | max 1500 Ω | 69 |
| Max. RAIN RAIN | 8 bits; sampling cycle 7.5 at 35 MHz; sampling time 214 ns | max 3900 Ω | 69 |
| Max. RAIN RAIN | 8 bits; sampling cycle 12.5 at 35 MHz; sampling time 357 ns | max 6800 Ω | 69 |
| Max. RAIN RAIN | 8 bits; sampling cycle 19.5 at 35 MHz; sampling time 557 ns | max 12000 Ω | 69 |
| Max. RAIN RAIN | 8 bits; sampling cycle 39.5 at 35 MHz; sampling time 1129 ns | max 27000 Ω | 69 |
| Max. RAIN RAIN | 8 bits; sampling cycle 79.5 at 35 MHz; sampling time 2271 ns | max 50000 Ω | 69 |
| Max. RAIN RAIN | 8 bits; sampling cycle 160.5 at 35 MHz; sampling time 4586 ns | max 50000 Ω | 69 |
| Thermal resistance junction-ambient ΘJA | LQFP64 10 × 10 mm; value | typ 65 °C/W | 90 |

Artpel1805/Beerator
Le but du projet est de réaliser intégralement un robot capable de se déplacer, de chercher et d’attraper une canette (de bière ? 😶), relever sa couleur, puis de la déposer dans la zone de couleur correspondante.

BruceZhq/kicad-design-multi-agent-system
Auditable KiCad hardware design with LangGraph multi-agent orchestration, Temporal workflows and deterministic evidence gates.

Groupe-Projet-ESE/BeerRobot
Chelsea COMLAN - Alix HAVRET - Loïcia KOEHL - Quentin SIMON


Lazorme/Ludz-le-chat
The Lidar and motor drivers are in drvLIDAR and drvMotor, respectively.

LirokWid/ESE_BMMPE_chat_souris
Ce project a pour but de développer un robot qui joue à chat avec d'autres robots, il embarque un PCB custom avec un STM32G070. Le projet est développé avec freeRTOS.

RiddheshVeling/Industrial-Flowmeter-Totalizer-with-Modbus-based-HMI-and-Data-Logging
EXTC Final year project: Industrial flowmeter totalizer with Modbus-based HMI for real-time monitoring and data logging using STM32 and RS485.

Yes. The symbol is MCU_ST_STM32G0:STM32G070RBTx and the footprint Package_QFP:LQFP-64_10x10mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
LQFP-64(10x10), with 64 pins. Its footprint is drawn on this page.
STMicroelectronics publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C529340, with 2,812 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the FS32K146HAT0MLHR by NXP Semiconductors, the R7FA6M1AD3CFM#AA0 by Renesas Electronics, the R7FA6M4AD3CFM#AA0 by Renesas Electronics and the ES32F3654LT by Qingdao Eastsoft Communication Tech. Check their datasheets: a part that fits the footprint may still differ in its ratings.
8 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.