
Remram
hasenbanck/remram
32bit STM32F7 based 3D printing controller using TMC2130 stepper driver
The STM32F765VIT6 is a microcontroller made by STMicroelectronics in a LQFP-100(14x14) package with 100 pins. -40℃~+85℃ 1.7V~3.6V 12bit 12bit 216MHz 2MB 32 Bit 512KB 82 ARM Cortex-M7 Built-in FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its KiCad symbol (MCU_ST_STM32F7:STM32F765VITx, from KiCad's library) and its footprint (Package_QFP:LQFP-100_14x14mm_P0.5mm, from KiCad's library), ready for a KiCad board. 52 are in stock at JLCPCB (part C710319). 2 open-source boards in 2 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | PE2 | Input/output |
| 2 | PE3 | Input/output |
| 3 | PE4 | Input/output |
| 4 | PE5 | Input/output |
| 5 | PE6 | Input/output |
| 6 | VBAT | Power in |
| 7 | PC13 | Input/output |
| 8 | PC14 | Input/output |
| 9 | PC15 | Input/output |
| 10 | VSS | Power in |
| 11 | VDD | Power in |
| 12 | PH0 | Input/output |
| 13 | PH1 | Input/output |
| 14 | NRST | Input |
| 15 | PC0 | Input/output |
| 16 | PC1 | Input/output |
| 17 | PC2 | Input/output |
| 18 | PC3 | Input/output |
| 19 | VSSA | Power in |
| 20 | VREF+ | Input |
| 21 | VDDA | Power in |
| 22 | PA0 | Input/output |
| 23 | PA1 | Input/output |
| 24 | PA2 | Input/output |
| 25 | PA3 | Input/output |
| 26 | VSS | Passive |
| 27 | VDD | Power in |
| 28 | PA4 | Input/output |
| 29 | PA5 | Input/output |
| 30 | PA6 | Input/output |
| 31 | PA7 | Input/output |
| 32 | PC4 | Input/output |
| 33 | PC5 | Input/output |
| 34 | PB0 | Input/output |
| 35 | PB1 | Input/output |
| 36 | PB2 | Input/output |
| 37 | PE7 | Input/output |
| 38 | PE8 | Input/output |
| 39 | PE9 | Input/output |
| 40 | PE10 | Input/output |
| 41 | PE11 | Input/output |
| 42 | PE12 | Input/output |
| 43 | PE13 | Input/output |
| 44 | PE14 | Input/output |
| 45 | PE15 | Input/output |
| 46 | PB10 | Input/output |
| 47 | PB11 | Input/output |
| 48 | VCAP_1 | Power out |
| 49 | VSS | Passive |
| 50 | VDD | Power in |
| 51 | PB12 | Input/output |
| 52 | PB13 | Input/output |
| 53 | PB14 | Input/output |
| 54 | PB15 | Input/output |
| 55 | PD8 | Input/output |
| 56 | PD9 | Input/output |
| 57 | PD10 | Input/output |
| 58 | PD11 | Input/output |
| 59 | PD12 | Input/output |
| 60 | PD13 | Input/output |
| 61 | PD14 | Input/output |
| 62 | PD15 | Input/output |
| 63 | PC6 | Input/output |
| 64 | PC7 | Input/output |
| 65 | PC8 | Input/output |
| 66 | PC9 | Input/output |
| 67 | PA8 | Input/output |
| 68 | PA9 | Input/output |
| 69 | PA10 | Input/output |
| 70 | PA11 | Input/output |
| 71 | PA12 | Input/output |
| 72 | PA13 | Input/output |
| 73 | VCAP_2 | Power out |
| 74 | VSS | Passive |
| 75 | VDD | Power in |
| 76 | PA14 | Input/output |
| 77 | PA15 | Input/output |
| 78 | PC10 | Input/output |
| 79 | PC11 | Input/output |
| 80 | PC12 | Input/output |
| 81 | PD0 | Input/output |
| 82 | PD1 | Input/output |
| 83 | PD2 | Input/output |
| 84 | PD3 | Input/output |
| 85 | PD4 | Input/output |
| 86 | PD5 | Input/output |
| 87 | PD6 | Input/output |
| 88 | PD7 | Input/output |
| 89 | PB3 | Input/output |
| 90 | PB4 | Input/output |
| 91 | PB5 | Input/output |
| 92 | PB6 | Input/output |
| 93 | PB7 | Input/output |
| 94 | BOOT0 | Input |
| 95 | PB8 | Input/output |
| 96 | PB9 | Input/output |
| 97 | PE0 | Input/output |
| 98 | PE1 | Input/output |
| 99 | VSS | Passive |
| 100 | VDD | Power in |

hasenbanck/remram
32bit STM32F7 based 3D printing controller using TMC2130 stepper driver

Prachannagven/stm32f765-facial-detection
A project built around the STM32F765VIT6 chip to perform basic facial detection and to act as a flight controller for a micro drone.
<iframe src="https://pcbkit.io/embed/parts/st/STM32F765VIT6" title="STM32F765VIT6 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/st/STM32F765VIT6.jpg" alt="STM32F765VIT6" width="1200" height="900">[](https://pcbkit.io/parts/st/STM32F765VIT6)Yes. The symbol is MCU_ST_STM32F7:STM32F765VITx and the footprint Package_QFP:LQFP-100_14x14mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
LQFP-100(14x14), with 100 pins. Its footprint is drawn on this page.
STMicroelectronics publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C710319, with 52 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the GD32F470VIT6 by GigaDevice Semicon Beijing, the STM32H743VIT6 by STMicroelectronics, the STM32H750VBT6 by STMicroelectronics and the AT32F403AVGT7 by ARTERY. Check their datasheets: a part that fits the footprint may still differ in its ratings.
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.