2 layers154 × 129.9 mm
Overview
The STM32F401RET6 is a microcontroller made by STMicroelectronics in a LQFP-64(10x10) package with 64 pins. -40℃~+85℃ 1.7V~3.6V 12bit 32 Bit 50 512KB 84MHz 96KB ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its KiCad symbol (MCU_ST_STM32F4:STM32F401RETx, from KiCad's library) and its footprint (Package_QFP:LQFP-64_10x10mm_P0.5mm, from KiCad's library), ready for a KiCad board. 555 are in stock at JLCPCB (part C116978). 9 open-source boards in 9 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
21- Supply, least
- 1.7 V · VDD, recommended operating min; external supply supervisor required · p. 60
- Supply, most
- 3.6 V · VDD, recommended operating max · p. 60
- Supply, most
- 2.4 V · VDDA, recommended operating max, ADC limited to 1.2 Msamples/s · p. 60
- Supply, least
- 2.4 V · VDDA, recommended operating min, ADC limited to 2.4 Msamples/s · p. 60
- Supply, least
- 1.65 V · VBAT, recommended operating min · p. 60
- Supply, absolute maximum
- 4 V · VDD, VDDA and VBAT, absolute max · p. 58
- Works from
- -40 °C · ambient min, suffix 6, maximum power dissipation · p. 61
- Works up to
- 85 °C · ambient max, suffix 6, maximum power dissipation · p. 61
- Works up to
- 105 °C · ambient max, suffix 6, low power dissipation, subject to junction limit · p. 61
- Junction, hottest
- 105 °C · junction operating max, suffix 6 · p. 61
- Junction, hottest
- 125 °C · junction absolute max · p. 59
- Takes working
- 23.4 mA · typical run, 84 MHz, Flash ART enabled except prefetch, peripherals enabled, VDD = 3.3 V · p. 67
- Takes at most
- 36.3 mA · max run, 84 MHz, Flash ART disabled, peripherals enabled, TA = 105 °C · p. 68
- Takes asleep
- 2.1 µA · typical standby, VDD = 3.3 V, RTC and LSE OFF, TA = 25 °C · p. 70
- A pin gives at most
- 25 mA · absolute max current sunk by one I/O or control pin · p. 59
- Junction to air (LQFP64)
- 50 K/W · junction-to-ambient thermal resistance · p. 131
- Takes at most
- 34.3 mA · IDD, max, 84 MHz, Flash, ART disabled, all peripherals enabled, TA = 85 °C · p. 68
- Takes asleep
- 5.3 mA · IDD, typical, Sleep, 84 MHz, all peripherals disabled · p. 69
- Takes asleep
- 10 µA · IDD_STOP, typical, low power low voltage regulator, Flash deep power down, VDD = 3.3 V · p. 70
- A pin gives at most
- 20 mA · GPIO max source or sink, relaxed VOL/VOH; excludes PC13–PC15 · p. 93
- A pin gives at most
- 3 mA · PC13–PC15 max source or sink · p. 93
What it is and has
20- Clock frequency
- Up to 84 MHz · p. 1
- Performance
- 105 DMIPS, 1.25 DMIPS/MHz (Dhrystone 2.1) · p. 1
- Flash memory
- Up to 512 Kbytes · p. 1
- SRAM
- Up to 96 Kbytes · p. 1
- External oscillator
- 4 to 26 MHz crystal oscillator · p. 1
- Internal oscillator
- 16 MHz factory-trimmed RC · p. 1
- Low-power modes
- Sleep, Stop, Standby · p. 26
- Core
- ARM Cortex-M4, 32-bit MCU with FPU, 105 DMIPS · p. 1
- Maximum clock frequency
- 84 MHz · p. 1
- Memories and peripherals
- 512KB Flash/96KB RAM, 11 TIMs, 1 ADC, 11 communication interfaces · p. 1
- Debug
- Serial wire debug (SWD) and JTAG interfaces · p. 1
- DSP
- DSP instructions · p. 1
- Core
- ARM Cortex-M4, 32-bit, FPU · p. 1
- Flash memory
- 512 KB · p. 1
- RAM
- 96 KB · p. 1
- Timers
- 11 · p. 1
- ADC
- 1 · p. 1
- Communication interfaces
- 11 · p. 1
- Memory protection unit
- Present · p. 1
- DSP instructions
- Supported · p. 1
Around it
2- crystal 4 to 26 MHz
- between OSC_IN and OSC_OUT; Crystal/ceramic resonator; place the resonator and load capacitors as close as possible to the oscillator pins. · p. 78
- cap 5 pF to 25 pF
- between OSC_IN and GND; CL1; high-quality ceramic for high-frequency applications; select to match the crystal or resonator; CL1 and CL2 are usually the same size. · p. 78
Specifications
638| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| External main supply voltage (including VDDA, VDD and VBAT) VDD–VSS | min -0.3 · max 4 V | 58 | |
| Input voltage on any other pin VIN | Minimum VSS–0.3 | max 4 V | 58 |
| Input voltage for BOOT0 VIN | Minimum VSS | max 9 V | 58 |
| Variations between different VDD power pins |ΔVDDx| | max 50 mV | 58 | |
| Variations between all the different ground pins |VSSX −VSS| | max 50 mV | 58 | |
| Total current into sum of all VDD_x power lines (source) ΣIVDD | max 160 mA | 59 | |
| Total current out of sum of all VSS_x ground lines (sink) Σ IVSS | max -160 mA | 59 | |
| Maximum current into each VDD_x power line (source) IVDD | max 100 mA | 59 | |
| Maximum current out of each VSS_x ground line (sink) IVSS | max -100 mA | 59 | |
| Output current sunk by any I/O and control pin IIO | max 25 mA | 59 | |
| Output current sourced by any I/O and control pin IIO | max -25 mA | 59 | |
| Total output current sunk by sum of all I/O and control pins ΣIIO | max 120 mA | 59 | |
| Total output current sourced by sum of all I/Os and control pins ΣIIO | max -120 mA | 59 | |
| Injected current on FT pins IINJ(PIN) | Negative/positive limits –5/+0 mA | min -5 · max 0 mA | 59 |
| Injected current on NRST and B pins IINJ(PIN) | Negative/positive limits –5/+0 mA | min -5 · max 0 mA | 59 |
| Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) | Absolute sum of positive and negative injected currents; limit ±25 mA | min -25 · max 25 mA | 59 |
| Storage temperature range TSTG | min -65 · max 150 °C | 59 | |
| Maximum junction temperature TJ | max 125 °C | 59 | |
| Internal AHB clock frequency fHCLK | Power Scale3, regulator ON, VOS[1:0] = 0x01 | min 0 · max 60 MHz | 60 |
| Internal AHB clock frequency fHCLK | Power Scale2, regulator ON, VOS[1:0] = 0x10 | min 0 · max 84 MHz | 60 |
| Internal APB1 clock frequency fPCLK1 | min 0 · max 42 MHz | 60 | |
| Internal APB2 clock frequency fPCLK2 | min 0 · max 84 MHz | 60 | |
| Standard operating voltage VDD | 1.7 V minimum requires external power supply supervisor | min 1.7 · max 3.6 V | 60 |
| Analog operating voltage (ADC limited to 1.2 M samples) VDDA | Same potential as VDD; 1.7 V minimum requires external supervisor | min 1.7 · max 2.4 V | 60 |
| Analog operating voltage (ADC limited to 2.4 M samples) VDDA | Same potential as VDD | min 2.4 · max 3.6 V | 60 |
| Backup operating voltage VBAT | min 1.65 · max 3.6 V | 60 | |
| Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins V12 | VOS[1:0] = 0x01, maximum frequency 60 MHz | min 1.08 · typ 1.14 · max 1.2 V | 60 |
| Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins V12 | VOS[1:0] = 0x10, maximum frequency 84 MHz | min 1.2 · typ 1.26 · max 1.32 V | 60 |
| Input voltage on RST and FT pins VIN | 2 V ≤ VDD ≤ 3.6 V; disable internal pull resistors above VDD+0.3 V | min -0.3 · max 5.5 V | 60 |
| Input voltage on RST and FT pins VIN | VDD ≤ 2 V; disable internal pull resistors above VDD+0.3 V | min -0.3 · max 5.2 V | 60 |
| Input voltage on BOOT0 pin VIN | min 0 · max 9 V | 60 | |
| Ambient temperature for 6 suffix version TA | Maximum power dissipation | min -40 · max 85 °C | 61 |
| Ambient temperature for 6 suffix version TA | Low power dissipation; TJ must not exceed TJmax | min -40 · max 105 °C | 61 |
| Junction temperature range TJ | 6 suffix version | min -40 · max 105 °C | 61 |
| Maximum Flash memory access frequency with no wait states (fFlashmax) | VDD = 2.1 to 2.4 V; ADC conversion up to 1.2 Msps; Flash up to 84 MHz with 3 wait states; no I/O compensation; clock output up to 30 MHz; 16-bit erase/program | max 22 MHz | 61 |
| Maximum Flash memory access frequency with no wait states (fFlashmax) | VDD = 2.4 to 2.7 V; ADC conversion up to 2.4 Msps; Flash up to 84 MHz with 3 wait states; I/O compensation works; clock output up to 48 MHz; 16-bit erase/program | max 24 MHz | 61 |
| Maximum Flash memory access frequency with no wait states (fFlashmax) | VDD = 2.7 to 3.6 V; ADC conversion up to 2.4 Msps; Flash up to 84 MHz with 2 wait states; I/O compensation works; 32-bit erase/program | max 30 MHz | 61 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 84 MHz, TA = 25 °C | typ 21.8 · max 23.1 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 84 MHz, TA = 85 °C | max 24.1 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 84 MHz, TA = 105 °C | max 25.3 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 60 MHz, TA = 25 °C | typ 15.8 · max 16.5 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 60 MHz, TA = 85 °C | max 17.5 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 60 MHz, TA = 105 °C | max 18.7 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 40 MHz, TA = 25 °C | typ 11.4 · max 11.9 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 40 MHz, TA = 85 °C | max 12.9 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 40 MHz, TA = 105 °C | max 13.9 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 20 MHz, TA = 25 °C | typ 6 · max 6.3 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 20 MHz, TA = 85 °C | max 7.3 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 20 MHz, TA = 105 °C | max 8.3 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 84 MHz, TA = 25 °C | typ 12.7 · max 13.5 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 84 MHz, TA = 85 °C | max 14.5 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 84 MHz, TA = 105 °C | max 16.3 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 60 MHz, TA = 25 °C | typ 9.2 · max 10.5 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 60 MHz, TA = 85 °C | max 11.5 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 60 MHz, TA = 105 °C | max 12.8 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 40 MHz, TA = 25 °C | typ 6.7 · max 7.1 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 40 MHz, TA = 85 °C | max 8.1 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 40 MHz, TA = 105 °C | max 9.1 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 20 MHz, TA = 25 °C | typ 3.6 · max 3.8 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 20 MHz, TA = 85 °C | max 4.8 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 20 MHz, TA = 105 °C | max 5.8 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 84 MHz, TA = 25 °C | typ 22 · max 23.1 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 84 MHz, TA = 85 °C | max 24.1 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 84 MHz, TA = 105 °C | max 25.3 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 60 MHz, TA = 25 °C | typ 16 · max 16.9 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 60 MHz, TA = 85 °C | max 17.9 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 60 MHz, TA = 105 °C | max 19.8 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 40 MHz, TA = 25 °C | typ 11.6 · max 12.1 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 40 MHz, TA = 85 °C | max 13.1 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 40 MHz, TA = 105 °C | max 14.1 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 20 MHz, TA = 25 °C | typ 6.2 · max 6.5 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 20 MHz, TA = 85 °C | max 7.5 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 20 MHz, TA = 105 °C | max 8.5 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 84 MHz, TA = 25 °C | typ 12.9 · max 14 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 84 MHz, TA = 85 °C | max 15 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 84 MHz, TA = 105 °C | max 16.3 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 60 MHz, TA = 25 °C | typ 9.5 · max 10.5 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 60 MHz, TA = 85 °C | max 11.5 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 60 MHz, TA = 105 °C | max 12.8 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 40 MHz, TA = 25 °C | typ 6.9 · max 7.3 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 40 MHz, TA = 85 °C | max 8.3 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 40 MHz, TA = 105 °C | max 9.3 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 20 MHz, TA = 25 °C | typ 3.8 · max 4 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 20 MHz, TA = 85 °C | max 5 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 20 MHz, TA = 105 °C | max 6 mA | 66 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 84 MHz, TA = 25 °C | typ 23.2 · max 24.5 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 84 MHz, TA = 85 °C | max 25.6 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 84 MHz, TA = 105 °C | max 26.6 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 60 MHz, TA = 25 °C | typ 15.1 · max 16.3 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 60 MHz, TA = 85 °C | max 17.4 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 60 MHz, TA = 105 °C | max 18.4 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 40 MHz, TA = 25 °C | typ 10.8 · max 12.1 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 40 MHz, TA = 85 °C | max 13.2 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 40 MHz, TA = 105 °C | max 14.2 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 30 MHz, TA = 25 °C | typ 8.8 · max 10 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 30 MHz, TA = 85 °C | max 11.1 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 30 MHz, TA = 105 °C | max 12.2 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 20 MHz, TA = 25 °C | typ 6.9 · max 8 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 20 MHz, TA = 85 °C | max 9 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 20 MHz, TA = 105 °C | max 10.1 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 84 MHz, TA = 25 °C | typ 12.3 · max 13.6 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 84 MHz, TA = 85 °C | max 14.7 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 84 MHz, TA = 105 °C | max 15.7 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 60 MHz, TA = 25 °C | typ 8.2 · max 9.4 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 60 MHz, TA = 85 °C | max 10.5 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 60 MHz, TA = 105 °C | max 11.5 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 40 MHz, TA = 25 °C | typ 6 · max 7.3 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 40 MHz, TA = 85 °C | max 8.3 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 40 MHz, TA = 105 °C | max 9.4 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 30 MHz, TA = 25 °C | typ 4.9 · max 6.2 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 30 MHz, TA = 85 °C | max 7.2 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 30 MHz, TA = 105 °C | max 8.3 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 20 MHz, TA = 25 °C | typ 4 · max 5.1 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 20 MHz, TA = 85 °C | max 6.1 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 20 MHz, TA = 105 °C | max 7.2 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 84 MHz, TA = 25 °C | typ 23.4 · max 24.7 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 84 MHz, TA = 85 °C | max 25.8 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 84 MHz, TA = 105 °C | max 26.8 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 60 MHz, TA = 25 °C | typ 15.3 · max 16.5 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 60 MHz, TA = 85 °C | max 17.6 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 60 MHz, TA = 105 °C | max 18.6 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 40 MHz, TA = 25 °C | typ 11 · max 12.3 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 40 MHz, TA = 85 °C | max 13.4 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 40 MHz, TA = 105 °C | max 14.4 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 30 MHz, TA = 25 °C | typ 9 · max 10.2 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 30 MHz, TA = 85 °C | max 11.3 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 30 MHz, TA = 105 °C | max 12.4 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 20 MHz, TA = 25 °C | typ 7.1 · max 8.2 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 20 MHz, TA = 85 °C | max 9.2 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 20 MHz, TA = 105 °C | max 10.3 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 84 MHz, TA = 25 °C | typ 12.5 · max 13.8 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 84 MHz, TA = 85 °C | max 14.9 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 84 MHz, TA = 105 °C | max 15.9 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 60 MHz, TA = 25 °C | typ 8.4 · max 9.6 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 60 MHz, TA = 85 °C | max 10.7 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 60 MHz, TA = 105 °C | max 11.7 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 40 MHz, TA = 25 °C | typ 6.2 · max 7.5 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 40 MHz, TA = 85 °C | max 8.5 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 40 MHz, TA = 105 °C | max 9.6 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 30 MHz, TA = 25 °C | typ 5.1 · max 6.4 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 30 MHz, TA = 85 °C | max 7.4 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 30 MHz, TA = 105 °C | max 8.5 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 20 MHz, TA = 25 °C | typ 4.2 · max 5.3 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 20 MHz, TA = 85 °C | max 6.3 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 20 MHz, TA = 105 °C | max 7.4 mA | 67 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 84 MHz, TA = 25 °C | typ 31.1 · max 32.2 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 84 MHz, TA = 85 °C | max 34.3 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 84 MHz, TA = 105 °C | max 36.3 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 60 MHz, TA = 25 °C | typ 21.7 · max 22.1 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 60 MHz, TA = 85 °C | max 23.2 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 60 MHz, TA = 105 °C | max 24.2 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 40 MHz, TA = 25 °C | typ 15.5 · max 16.1 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 40 MHz, TA = 85 °C | max 17.1 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 40 MHz, TA = 105 °C | max 18.1 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 30 MHz, TA = 25 °C | typ 12.6 · max 13.1 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 30 MHz, TA = 85 °C | max 14.1 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 30 MHz, TA = 105 °C | max 15.1 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 20 MHz, TA = 25 °C | typ 9.8 · max 10.1 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 20 MHz, TA = 85 °C | max 11.1 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 20 MHz, TA = 105 °C | max 12.1 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 84 MHz, TA = 25 °C | typ 20.2 · max 21.3 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 84 MHz, TA = 85 °C | max 23.4 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 84 MHz, TA = 105 °C | max 25.4 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 60 MHz, TA = 25 °C | typ 14.9 · max 15.3 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 60 MHz, TA = 85 °C | max 16.3 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 60 MHz, TA = 105 °C | max 17.3 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 40 MHz, TA = 25 °C | typ 10.6 · max 11.2 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 40 MHz, TA = 85 °C | max 12.2 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 40 MHz, TA = 105 °C | max 13.3 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 30 MHz, TA = 25 °C | typ 8.8 · max 9.2 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 30 MHz, TA = 85 °C | max 10.2 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 30 MHz, TA = 105 °C | max 11.2 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 20 MHz, TA = 25 °C | typ 6.9 · max 7.2 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 20 MHz, TA = 85 °C | max 8.2 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 20 MHz, TA = 105 °C | max 9.2 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 84 MHz, TA = 25 °C | typ 32.5 · max 33.3 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 84 MHz, TA = 85 °C | max 34.3 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 84 MHz, TA = 105 °C | max 35.4 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 60 MHz, TA = 25 °C | typ 22.2 · max 23.3 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 60 MHz, TA = 85 °C | max 24.3 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 60 MHz, TA = 105 °C | max 25.3 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 40 MHz, TA = 25 °C | typ 16 · max 17.1 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 40 MHz, TA = 85 °C | max 18.1 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 40 MHz, TA = 105 °C | max 19.2 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 30 MHz, TA = 25 °C | typ 12.9 · max 14.1 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 30 MHz, TA = 85 °C | max 15.1 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 30 MHz, TA = 105 °C | max 16.1 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 20 MHz, TA = 25 °C | typ 10.2 · max 11.1 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 20 MHz, TA = 85 °C | max 12.1 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals enabled, 20 MHz, TA = 105 °C | max 13.1 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 84 MHz, TA = 25 °C | typ 21.6 · max 22.4 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 84 MHz, TA = 85 °C | max 23.5 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 84 MHz, TA = 105 °C | max 24.5 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 60 MHz, TA = 25 °C | typ 15.3 · max 16.4 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 60 MHz, TA = 85 °C | max 17.4 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 60 MHz, TA = 105 °C | max 18.4 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 40 MHz, TA = 25 °C | typ 11.2 · max 12.3 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 40 MHz, TA = 85 °C | max 13.3 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 40 MHz, TA = 105 °C | max 14.3 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 30 MHz, TA = 25 °C | typ 9 · max 10.2 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 30 MHz, TA = 85 °C | max 11.2 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 30 MHz, TA = 105 °C | max 12.3 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 20 MHz, TA = 25 °C | typ 7.3 · max 8.2 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 20 MHz, TA = 85 °C | max 9.2 mA | 68 |
| Supply current in Run mode IDD | External clock, peripherals disabled, 20 MHz, TA = 105 °C | max 10.2 mA | 68 |
| Main regulator usage IDD_STOP | Flash in Stop mode, all oscillators OFF, no independent watchdog, TA = 25 °C | typ 111 · max 140 uA | 70 |
| Main regulator usage IDD_STOP | Flash in Stop mode, all oscillators OFF, no independent watchdog, TA = 85 °C | max 450 uA | 70 |
| Main regulator usage IDD_STOP | Flash in Stop mode, all oscillators OFF, no independent watchdog, TA = 105 °C | max 670 uA | 70 |
| Low power regulator usage IDD_STOP | Flash in Stop mode, all oscillators OFF, no independent watchdog, TA = 25 °C | typ 42 · max 65 uA | 70 |
| Low power regulator usage IDD_STOP | Flash in Stop mode, all oscillators OFF, no independent watchdog, TA = 85 °C | max 330 uA | 70 |
| Low power regulator usage IDD_STOP | Flash in Stop mode, all oscillators OFF, no independent watchdog, TA = 105 °C | max 560 uA | 70 |
| Main regulator usage IDD_STOP | Flash in Deep power down mode, all oscillators OFF, no independent watchdog, TA = 25 °C | typ 73 · max 100 uA | 70 |
| Main regulator usage IDD_STOP | Flash in Deep power down mode, all oscillators OFF, no independent watchdog, TA = 85 °C | max 360 uA | 70 |
| Main regulator usage IDD_STOP | Flash in Deep power down mode, all oscillators OFF, no independent watchdog, TA = 105 °C | max 560 uA | 70 |
| Low power regulator usage IDD_STOP | Flash in Deep power down mode, all oscillators OFF, no independent watchdog, TA = 25 °C | typ 12 · max 36 uA | 70 |
| Low power regulator usage IDD_STOP | Flash in Deep power down mode, all oscillators OFF, no independent watchdog, TA = 85 °C | max 270 uA | 70 |
| Low power regulator usage IDD_STOP | Flash in Deep power down mode, all oscillators OFF, no independent watchdog, TA = 105 °C | max 520 uA | 70 |
| Low power low voltage regulator usage IDD_STOP | Flash in Deep power down mode, all oscillators OFF, no independent watchdog, TA = 25 °C | typ 10 · max 28 uA | 70 |
| Low power low voltage regulator usage IDD_STOP | Flash in Deep power down mode, all oscillators OFF, no independent watchdog, TA = 85 °C | max 230 uA | 70 |
| Low power low voltage regulator usage IDD_STOP | Flash in Deep power down mode, all oscillators OFF, no independent watchdog, TA = 105 °C | max 470 uA | 70 |
| Supply current in Standby mode IDD_STBY | LSE and RTC ON, TA = 25 °C | typ 2.4 · max 4 uA | 70 |
| Supply current in Standby mode IDD_STBY | LSE and RTC ON, TA = 85 °C | max 12 uA | 70 |
| Supply current in Standby mode IDD_STBY | LSE and RTC ON, TA = 105 °C | max 24 uA | 70 |
| Supply current in Standby mode IDD_STBY | RTC and LSE OFF, TA = 25 °C | typ 1.8 · max 3 uA | 70 |
| Supply current in Standby mode IDD_STBY | RTC and LSE OFF, TA = 85 °C | max 11 uA | 70 |
| Supply current in Standby mode IDD_STBY | RTC and LSE OFF, TA = 105 °C | max 23 uA | 70 |
| Supply current in Standby mode IDD_STBY | LSE and RTC ON, TA = 25 °C | typ 2.8 · max 5 uA | 70 |
| Supply current in Standby mode IDD_STBY | LSE and RTC ON, TA = 85 °C | max 14 uA | 70 |
| Supply current in Standby mode IDD_STBY | LSE and RTC ON, TA = 105 °C | max 28 uA | 70 |
| Supply current in Standby mode IDD_STBY | RTC and LSE OFF, TA = 25 °C | typ 2.1 · max 4 uA | 70 |
| Supply current in Standby mode IDD_STBY | RTC and LSE OFF, TA = 85 °C | max 13 uA | 70 |
| Supply current in Standby mode IDD_STBY | RTC and LSE OFF, TA = 105 °C | max 27 uA | 70 |
| Electrostatic discharge voltage (human body model) VESD(HBM) | TA = +25 °C, JESD22-A114, class 2 | max 2000 V | 90 |
| Electrostatic discharge voltage (charge device model) VESD(CDM) | TA = +25 °C, ANSI/ESD STM5.3.1, class II | max 400 V | 90 |
| Thermal resistance junction-ambient ΘJA | LQFP64 | typ 50 °C/W | 131 |
| InRush current on voltage regulator power-on (POR or wakeup from Standby) IRUSH | typ 160 · max 200 mA | 65 | |
| InRush energy on voltage regulator power-on (POR or wakeup from Standby) ERUSH | VDD = 1.7 V, TA = 105 °C, IRUSH = 171 mA for 31 us | max 5.4 uC | 65 |
| Supply current in Run mode IDD | 84 MHz; external clock; all peripherals enabled; TA = 25 °C | typ 21.8 · max 23.1 mA | 66 |
| Supply current in Run mode IDD | 84 MHz; external clock; all peripherals enabled; TA = 85 °C | max 24.1 mA | 66 |
| Supply current in Run mode IDD | 84 MHz; external clock; all peripherals enabled; TA = 105 °C | max 25.3 mA | 66 |
| Supply current in Run mode IDD | 60 MHz; external clock; all peripherals enabled; TA = 25 °C | typ 15.8 · max 16.5 mA | 66 |
| Supply current in Run mode IDD | 60 MHz; external clock; all peripherals enabled; TA = 85 °C | max 17.5 mA | 66 |
| Supply current in Run mode IDD | 60 MHz; external clock; all peripherals enabled; TA = 105 °C | max 18.7 mA | 66 |
| Supply current in Run mode IDD | 40 MHz; external clock; all peripherals enabled; TA = 25 °C | typ 11.4 · max 11.9 mA | 66 |
| Supply current in Run mode IDD | 40 MHz; external clock; all peripherals enabled; TA = 85 °C | max 12.9 mA | 66 |
| Supply current in Run mode IDD | 40 MHz; external clock; all peripherals enabled; TA = 105 °C | max 13.9 mA | 66 |
| Supply current in Run mode IDD | 20 MHz; external clock; all peripherals enabled; TA = 25 °C | typ 6 · max 6.3 mA | 66 |
| Supply current in Run mode IDD | 20 MHz; external clock; all peripherals enabled; TA = 85 °C | max 7.3 mA | 66 |
| Supply current in Run mode IDD | 20 MHz; external clock; all peripherals enabled; TA = 105 °C | max 8.3 mA | 66 |
| Supply current in Run mode IDD | 84 MHz; external clock; all peripherals disabled; TA = 25 °C | typ 12.7 · max 13.5 mA | 66 |
| Supply current in Run mode IDD | 84 MHz; external clock; all peripherals disabled; TA = 85 °C | max 14.5 mA | 66 |
| Supply current in Run mode IDD | 84 MHz; external clock; all peripherals disabled; TA = 105 °C | max 16.3 mA | 66 |
| Supply current in Run mode IDD | 60 MHz; external clock; all peripherals disabled; TA = 25 °C | typ 9.2 · max 10.5 mA | 66 |
| Supply current in Run mode IDD | 60 MHz; external clock; all peripherals disabled; TA = 85 °C | max 11.5 mA | 66 |
| Supply current in Run mode IDD | 60 MHz; external clock; all peripherals disabled; TA = 105 °C | max 12.8 mA | 66 |
| Supply current in Run mode IDD | 40 MHz; external clock; all peripherals disabled; TA = 25 °C | typ 6.7 · max 7.1 mA | 66 |
| Supply current in Run mode IDD | 40 MHz; external clock; all peripherals disabled; TA = 85 °C | max 8.1 mA | 66 |
| Supply current in Run mode IDD | 40 MHz; external clock; all peripherals disabled; TA = 105 °C | max 9.1 mA | 66 |
| Supply current in Run mode IDD | 20 MHz; external clock; all peripherals disabled; TA = 25 °C | typ 3.6 · max 3.8 mA | 66 |
| Supply current in Run mode IDD | 20 MHz; external clock; all peripherals disabled; TA = 85 °C | max 4.8 mA | 66 |
| Supply current in Run mode IDD | 20 MHz; external clock; all peripherals disabled; TA = 105 °C | max 5.8 mA | 66 |
| Supply current in Run mode IDD | 84 MHz; all peripherals enabled; TA = 25 °C | typ 22 · max 23.1 mA | 66 |
| Supply current in Run mode IDD | 84 MHz; all peripherals enabled; TA = 85 °C | max 24.1 mA | 66 |
| Supply current in Run mode IDD | 84 MHz; all peripherals enabled; TA = 105 °C | max 25.3 mA | 66 |
| Supply current in Run mode IDD | 60 MHz; all peripherals enabled; TA = 25 °C | typ 16 · max 16.9 mA | 66 |
| Supply current in Run mode IDD | 60 MHz; all peripherals enabled; TA = 85 °C | max 17.9 mA | 66 |
| Supply current in Run mode IDD | 60 MHz; all peripherals enabled; TA = 105 °C | max 19.8 mA | 66 |
| Supply current in Run mode IDD | 40 MHz; all peripherals enabled; TA = 25 °C | typ 11.6 · max 12.1 mA | 66 |
| Supply current in Run mode IDD | 40 MHz; all peripherals enabled; TA = 85 °C | max 13.1 mA | 66 |
| Supply current in Run mode IDD | 40 MHz; all peripherals enabled; TA = 105 °C | max 14.1 mA | 66 |
| Supply current in Run mode IDD | 20 MHz; all peripherals enabled; TA = 25 °C | typ 6.2 · max 6.5 mA | 66 |
| Supply current in Run mode IDD | 20 MHz; all peripherals enabled; TA = 85 °C | max 7.5 mA | 66 |
| Supply current in Run mode IDD | 20 MHz; all peripherals enabled; TA = 105 °C | max 8.5 mA | 66 |
| Supply current in Run mode IDD | 84 MHz; all peripherals disabled; TA = 25 °C | typ 12.9 · max 14 mA | 66 |
| Supply current in Run mode IDD | 84 MHz; all peripherals disabled; TA = 85 °C | max 15 mA | 66 |
| Supply current in Run mode IDD | 84 MHz; all peripherals disabled; TA = 105 °C | max 16.3 mA | 66 |
| Supply current in Run mode IDD | 60 MHz; all peripherals disabled; TA = 25 °C | typ 9.5 · max 10.5 mA | 66 |
| Supply current in Run mode IDD | 60 MHz; all peripherals disabled; TA = 85 °C | max 11.5 mA | 66 |
| Supply current in Run mode IDD | 60 MHz; all peripherals disabled; TA = 105 °C | max 12.8 mA | 66 |
| Supply current in Run mode IDD | 40 MHz; all peripherals disabled; TA = 25 °C | typ 6.9 · max 7.3 mA | 66 |
| Supply current in Run mode IDD | 40 MHz; all peripherals disabled; TA = 85 °C | max 8.3 mA | 66 |
| Supply current in Run mode IDD | 40 MHz; all peripherals disabled; TA = 105 °C | max 9.3 mA | 66 |
| Supply current in Run mode IDD | 20 MHz; all peripherals disabled; TA = 25 °C | typ 3.8 · max 4 mA | 66 |
| Supply current in Run mode IDD | 20 MHz; all peripherals disabled; TA = 85 °C | max 5 mA | 66 |
| Supply current in Run mode IDD | 20 MHz; all peripherals disabled; TA = 105 °C | max 6 mA | 66 |
| Supply current in Run mode IDD | 84 MHz; all peripherals enabled; TA = 25 °C | typ 23.2 · max 24.5 mA | 67 |
| Supply current in Run mode IDD | 84 MHz; all peripherals enabled; TA = 85 °C | max 25.6 mA | 67 |
| Supply current in Run mode IDD | 84 MHz; all peripherals enabled; TA = 105 °C | max 26.6 mA | 67 |
| Supply current in Run mode IDD | 60 MHz; all peripherals enabled; TA = 25 °C | typ 15.1 · max 16.3 mA | 67 |
| Supply current in Run mode IDD | 60 MHz; all peripherals enabled; TA = 85 °C | max 17.4 mA | 67 |
| Supply current in Run mode IDD | 60 MHz; all peripherals enabled; TA = 105 °C | max 18.4 mA | 67 |
| Supply current in Run mode IDD | 40 MHz; all peripherals enabled; TA = 25 °C | typ 10.8 · max 12.1 mA | 67 |
| Supply current in Run mode IDD | 40 MHz; all peripherals enabled; TA = 85 °C | max 13.2 mA | 67 |
| Supply current in Run mode IDD | 40 MHz; all peripherals enabled; TA = 105 °C | max 14.2 mA | 67 |
| Supply current in Run mode IDD | 30 MHz; all peripherals enabled; TA = 25 °C | typ 8.8 · max 10 mA | 67 |
| Supply current in Run mode IDD | 30 MHz; all peripherals enabled; TA = 85 °C | max 11.1 mA | 67 |
| Supply current in Run mode IDD | 30 MHz; all peripherals enabled; TA = 105 °C | max 12.2 mA | 67 |
| Supply current in Run mode IDD | 20 MHz; all peripherals enabled; TA = 25 °C | typ 6.9 · max 8 mA | 67 |
| Supply current in Run mode IDD | 20 MHz; all peripherals enabled; TA = 85 °C | max 9 mA | 67 |
| Supply current in Run mode IDD | 20 MHz; all peripherals enabled; TA = 105 °C | max 10.1 mA | 67 |
| Supply current in Run mode IDD | 84 MHz; all peripherals disabled; TA = 25 °C | typ 12.3 · max 13.6 mA | 67 |
| Supply current in Run mode IDD | 84 MHz; all peripherals disabled; TA = 85 °C | max 14.7 mA | 67 |
| Supply current in Run mode IDD | 84 MHz; all peripherals disabled; TA = 105 °C | max 15.7 mA | 67 |
| Supply current in Run mode IDD | 60 MHz; all peripherals disabled; TA = 25 °C | typ 8.2 · max 9.4 mA | 67 |
| Supply current in Run mode IDD | 60 MHz; all peripherals disabled; TA = 85 °C | max 10.5 mA | 67 |
| Supply current in Run mode IDD | 60 MHz; all peripherals disabled; TA = 105 °C | max 11.5 mA | 67 |
| Supply current in Run mode IDD | 40 MHz; all peripherals disabled; TA = 25 °C | typ 6 · max 7.3 mA | 67 |
| Supply current in Run mode IDD | 40 MHz; all peripherals disabled; TA = 85 °C | max 8.3 mA | 67 |
| Supply current in Run mode IDD | 40 MHz; all peripherals disabled; TA = 105 °C | max 9.4 mA | 67 |
| Supply current in Run mode IDD | 30 MHz; all peripherals disabled; TA = 25 °C | typ 4.9 · max 6.2 mA | 67 |
| Supply current in Run mode IDD | 30 MHz; all peripherals disabled; TA = 85 °C | max 7.2 mA | 67 |
| Supply current in Run mode IDD | 30 MHz; all peripherals disabled; TA = 105 °C | max 8.3 mA | 67 |
| Supply current in Run mode IDD | 20 MHz; all peripherals disabled; TA = 25 °C | typ 4 · max 5.1 mA | 67 |
| Supply current in Run mode IDD | 20 MHz; all peripherals disabled; TA = 85 °C | max 6.1 mA | 67 |
| Supply current in Run mode IDD | 20 MHz; all peripherals disabled; TA = 105 °C | max 7.2 mA | 67 |
| Supply current in Run mode IDD | 84 MHz; all peripherals enabled; TA = 25 °C | typ 23.4 · max 24.7 mA | 67 |
| Supply current in Run mode IDD | 84 MHz; all peripherals enabled; TA = 85 °C | max 25.8 mA | 67 |
| Supply current in Run mode IDD | 84 MHz; all peripherals enabled; TA = 105 °C | max 26.8 mA | 67 |
| Supply current in Run mode IDD | 60 MHz; all peripherals enabled; TA = 25 °C | typ 15.3 · max 16.5 mA | 67 |
| Supply current in Run mode IDD | 60 MHz; all peripherals enabled; TA = 85 °C | max 17.6 mA | 67 |
| Supply current in Run mode IDD | 60 MHz; all peripherals enabled; TA = 105 °C | max 18.6 mA | 67 |
| Supply current in Run mode IDD | 40 MHz; all peripherals enabled; TA = 25 °C | typ 11 · max 12.3 mA | 67 |
| Supply current in Run mode IDD | 40 MHz; all peripherals enabled; TA = 85 °C | max 13.4 mA | 67 |
| Supply current in Run mode IDD | 40 MHz; all peripherals enabled; TA = 105 °C | max 14.4 mA | 67 |
| Supply current in Run mode IDD | 30 MHz; all peripherals enabled; TA = 25 °C | typ 9 · max 10.2 mA | 67 |
| Supply current in Run mode IDD | 30 MHz; all peripherals enabled; TA = 85 °C | max 11.3 mA | 67 |
| Supply current in Run mode IDD | 30 MHz; all peripherals enabled; TA = 105 °C | max 12.4 mA | 67 |
| Supply current in Run mode IDD | 20 MHz; all peripherals enabled; TA = 25 °C | typ 7.1 · max 8.2 mA | 67 |
| Supply current in Run mode IDD | 20 MHz; all peripherals enabled; TA = 85 °C | max 9.2 mA | 67 |
| Supply current in Run mode IDD | 20 MHz; all peripherals enabled; TA = 105 °C | max 10.3 mA | 67 |
| Supply current in Run mode IDD | 84 MHz; all peripherals disabled; TA = 25 °C | typ 12.5 · max 13.8 mA | 67 |
| Supply current in Run mode IDD | 84 MHz; all peripherals disabled; TA = 85 °C | max 14.9 mA | 67 |
| Supply current in Run mode IDD | 84 MHz; all peripherals disabled; TA = 105 °C | max 15.9 mA | 67 |
| Supply current in Run mode IDD | 60 MHz; all peripherals disabled; TA = 25 °C | typ 8.4 · max 9.6 mA | 67 |
| Supply current in Run mode IDD | 60 MHz; all peripherals disabled; TA = 85 °C | max 10.7 mA | 67 |
| Supply current in Run mode IDD | 60 MHz; all peripherals disabled; TA = 105 °C | max 11.7 mA | 67 |
| Supply current in Run mode IDD | 40 MHz; all peripherals disabled; TA = 25 °C | typ 6.2 · max 7.5 mA | 67 |
| Supply current in Run mode IDD | 40 MHz; all peripherals disabled; TA = 85 °C | max 8.5 mA | 67 |
| Supply current in Run mode IDD | 40 MHz; all peripherals disabled; TA = 105 °C | max 9.6 mA | 67 |
| Supply current in Run mode IDD | 30 MHz; all peripherals disabled; TA = 25 °C | typ 5.1 · max 6.4 mA | 67 |
| Supply current in Run mode IDD | 30 MHz; all peripherals disabled; TA = 85 °C | max 7.4 mA | 67 |
| Supply current in Run mode IDD | 30 MHz; all peripherals disabled; TA = 105 °C | max 8.5 mA | 67 |
| Supply current in Run mode IDD | 20 MHz; all peripherals disabled; TA = 25 °C | typ 4.2 · max 5.3 mA | 67 |
| Supply current in Run mode IDD | 20 MHz; all peripherals disabled; TA = 85 °C | max 6.3 mA | 67 |
| Supply current in Run mode IDD | 20 MHz; all peripherals disabled; TA = 105 °C | max 7.4 mA | 67 |
| Supply current in Run mode IDD | 84 MHz; all peripherals enabled; TA = 25 °C | typ 31.1 · max 32.2 mA | 68 |
| Supply current in Run mode IDD | 84 MHz; all peripherals enabled; TA = 85 °C | max 34.3 mA | 68 |
| Supply current in Run mode IDD | 84 MHz; all peripherals enabled; TA = 105 °C | max 36.3 mA | 68 |
| Supply current in Run mode IDD | 60 MHz; all peripherals enabled; TA = 25 °C | typ 21.7 · max 22.1 mA | 68 |
| Supply current in Run mode IDD | 60 MHz; all peripherals enabled; TA = 85 °C | max 23.2 mA | 68 |
| Supply current in Run mode IDD | 60 MHz; all peripherals enabled; TA = 105 °C | max 24.2 mA | 68 |
| Supply current in Run mode IDD | 40 MHz; all peripherals enabled; TA = 25 °C | typ 15.5 · max 16.1 mA | 68 |
| Supply current in Run mode IDD | 40 MHz; all peripherals enabled; TA = 85 °C | max 17.1 mA | 68 |
| Supply current in Run mode IDD | 40 MHz; all peripherals enabled; TA = 105 °C | max 18.1 mA | 68 |
| Supply current in Run mode IDD | 30 MHz; all peripherals enabled; TA = 25 °C | typ 12.6 · max 13.1 mA | 68 |
| Supply current in Run mode IDD | 30 MHz; all peripherals enabled; TA = 85 °C | max 14.1 mA | 68 |
| Supply current in Run mode IDD | 30 MHz; all peripherals enabled; TA = 105 °C | max 15.1 mA | 68 |
| Supply current in Run mode IDD | 20 MHz; all peripherals enabled; TA = 25 °C | typ 9.8 · max 10.1 mA | 68 |
| Supply current in Run mode IDD | 20 MHz; all peripherals enabled; TA = 85 °C | max 11.1 mA | 68 |
| Supply current in Run mode IDD | 20 MHz; all peripherals enabled; TA = 105 °C | max 12.1 mA | 68 |
| Supply current in Run mode IDD | 84 MHz; all peripherals disabled; TA = 25 °C | typ 20.2 · max 21.3 mA | 68 |
| Supply current in Run mode IDD | 84 MHz; all peripherals disabled; TA = 85 °C | max 23.4 mA | 68 |
| Supply current in Run mode IDD | 84 MHz; all peripherals disabled; TA = 105 °C | max 25.4 mA | 68 |
| Supply current in Run mode IDD | 60 MHz; all peripherals disabled; TA = 25 °C | typ 14.9 · max 15.3 mA | 68 |
| Supply current in Run mode IDD | 60 MHz; all peripherals disabled; TA = 85 °C | max 16.3 mA | 68 |
| Supply current in Run mode IDD | 60 MHz; all peripherals disabled; TA = 105 °C | max 17.3 mA | 68 |
| Supply current in Run mode IDD | 40 MHz; all peripherals disabled; TA = 25 °C | typ 10.6 · max 11.2 mA | 68 |
| Supply current in Run mode IDD | 40 MHz; all peripherals disabled; TA = 85 °C | max 12.2 mA | 68 |
| Supply current in Run mode IDD | 40 MHz; all peripherals disabled; TA = 105 °C | max 13.3 mA | 68 |
| Supply current in Run mode IDD | 30 MHz; all peripherals disabled; TA = 25 °C | typ 8.8 · max 9.2 mA | 68 |
| Supply current in Run mode IDD | 30 MHz; all peripherals disabled; TA = 85 °C | max 10.2 mA | 68 |
| Supply current in Run mode IDD | 30 MHz; all peripherals disabled; TA = 105 °C | max 11.2 mA | 68 |
| Supply current in Run mode IDD | 20 MHz; all peripherals disabled; TA = 25 °C | typ 6.9 · max 7.2 mA | 68 |
| Supply current in Run mode IDD | 20 MHz; all peripherals disabled; TA = 85 °C | max 8.2 mA | 68 |
| Supply current in Run mode IDD | 20 MHz; all peripherals disabled; TA = 105 °C | max 9.2 mA | 68 |
| Supply current in Run mode IDD | 84 MHz; all peripherals enabled; TA = 25 °C | typ 32.5 · max 33.3 mA | 68 |
| Supply current in Run mode IDD | 84 MHz; all peripherals enabled; TA = 85 °C | max 34.3 mA | 68 |
| Supply current in Run mode IDD | 84 MHz; all peripherals enabled; TA = 105 °C | max 35.4 mA | 68 |
| Supply current in Run mode IDD | 60 MHz; all peripherals enabled; TA = 25 °C | typ 22.2 · max 23.3 mA | 68 |
| Supply current in Run mode IDD | 60 MHz; all peripherals enabled; TA = 85 °C | max 24.3 mA | 68 |
| Supply current in Run mode IDD | 60 MHz; all peripherals enabled; TA = 105 °C | max 25.3 mA | 68 |
| Supply current in Run mode IDD | 40 MHz; all peripherals enabled; TA = 25 °C | typ 16 · max 17.1 mA | 68 |
| Supply current in Run mode IDD | 40 MHz; all peripherals enabled; TA = 85 °C | max 18.1 mA | 68 |
| Supply current in Run mode IDD | 40 MHz; all peripherals enabled; TA = 105 °C | max 19.2 mA | 68 |
| Supply current in Run mode IDD | 30 MHz; all peripherals enabled; TA = 25 °C | typ 12.9 · max 14.1 mA | 68 |
| Supply current in Run mode IDD | 30 MHz; all peripherals enabled; TA = 85 °C | max 15.1 mA | 68 |
| Supply current in Run mode IDD | 30 MHz; all peripherals enabled; TA = 105 °C | max 16.1 mA | 68 |
| Supply current in Run mode IDD | 20 MHz; all peripherals enabled; TA = 25 °C | typ 10.2 · max 11.1 mA | 68 |
| Supply current in Run mode IDD | 20 MHz; all peripherals enabled; TA = 85 °C | max 12.1 mA | 68 |
| Supply current in Run mode IDD | 20 MHz; all peripherals enabled; TA = 105 °C | max 13.1 mA | 68 |
| Supply current in Run mode IDD | 84 MHz; all peripherals disabled; TA = 25 °C | typ 21.6 · max 22.4 mA | 68 |
| Supply current in Run mode IDD | 84 MHz; all peripherals disabled; TA = 85 °C | max 23.5 mA | 68 |
| Supply current in Run mode IDD | 84 MHz; all peripherals disabled; TA = 105 °C | max 24.5 mA | 68 |
| Supply current in Run mode IDD | 60 MHz; all peripherals disabled; TA = 25 °C | typ 15.3 · max 16.4 mA | 68 |
| Supply current in Run mode IDD | 60 MHz; all peripherals disabled; TA = 85 °C | max 17.4 mA | 68 |
| Supply current in Run mode IDD | 60 MHz; all peripherals disabled; TA = 105 °C | max 18.4 mA | 68 |
| Supply current in Run mode IDD | 40 MHz; all peripherals disabled; TA = 25 °C | typ 11.2 · max 12.3 mA | 68 |
| Supply current in Run mode IDD | 40 MHz; all peripherals disabled; TA = 85 °C | max 13.3 mA | 68 |
| Supply current in Run mode IDD | 40 MHz; all peripherals disabled; TA = 105 °C | max 14.3 mA | 68 |
| Supply current in Run mode IDD | 30 MHz; all peripherals disabled; TA = 25 °C | typ 9 · max 10.2 mA | 68 |
| Supply current in Run mode IDD | 30 MHz; all peripherals disabled; TA = 85 °C | max 11.2 mA | 68 |
| Supply current in Run mode IDD | 30 MHz; all peripherals disabled; TA = 105 °C | max 12.3 mA | 68 |
| Supply current in Run mode IDD | 20 MHz; all peripherals disabled; TA = 25 °C | typ 7.3 · max 8.2 mA | 68 |
| Supply current in Run mode IDD | 20 MHz; all peripherals disabled; TA = 85 °C | max 9.2 mA | 68 |
| Supply current in Run mode IDD | 20 MHz; all peripherals disabled; TA = 105 °C | max 10.2 mA | 68 |
| Supply current in Sleep mode IDD | 84 MHz; all peripherals enabled; TA = 25 °C | typ 16.6 · max 17.4 mA | 69 |
| Supply current in Sleep mode IDD | 84 MHz; all peripherals enabled; TA = 85 °C | max 18.4 mA | 69 |
| Supply current in Sleep mode IDD | 84 MHz; all peripherals enabled; TA = 105 °C | max 19.5 mA | 69 |
| Supply current in Sleep mode IDD | 60 MHz; all peripherals enabled; TA = 25 °C | typ 10.8 · max 11.2 mA | 69 |
| Supply current in Sleep mode IDD | 60 MHz; all peripherals enabled; TA = 85 °C | max 12.3 mA | 69 |
| Supply current in Sleep mode IDD | 60 MHz; all peripherals enabled; TA = 105 °C | max 13.3 mA | 69 |
| Supply current in Sleep mode IDD | 40 MHz; all peripherals enabled; TA = 25 °C | typ 8.3 · max 9 mA | 69 |
| Supply current in Sleep mode IDD | 40 MHz; all peripherals enabled; TA = 85 °C | max 10 mA | 69 |
| Supply current in Sleep mode IDD | 40 MHz; all peripherals enabled; TA = 105 °C | max 11 mA | 69 |
| Supply current in Sleep mode IDD | 30 MHz; all peripherals enabled; TA = 25 °C | typ 6.8 · max 7.1 mA | 69 |
| Supply current in Sleep mode IDD | 30 MHz; all peripherals enabled; TA = 85 °C | max 8.1 mA | 69 |
| Supply current in Sleep mode IDD | 30 MHz; all peripherals enabled; TA = 105 °C | max 9.1 mA | 69 |
| Supply current in Sleep mode IDD | 20 MHz; all peripherals enabled; TA = 25 °C | typ 5.9 · max 6.1 mA | 69 |
| Supply current in Sleep mode IDD | 20 MHz; all peripherals enabled; TA = 85 °C | max 7.1 mA | 69 |
| Supply current in Sleep mode IDD | 20 MHz; all peripherals enabled; TA = 105 °C | max 8.1 mA | 69 |
| Supply current in Sleep mode IDD | 84 MHz; all peripherals disabled; TA = 25 °C | typ 5.3 · max 6.1 mA | 69 |
| Supply current in Sleep mode IDD | 84 MHz; all peripherals disabled; TA = 85 °C | max 7.1 mA | 69 |
| Supply current in Sleep mode IDD | 84 MHz; all peripherals disabled; TA = 105 °C | max 8.2 mA | 69 |
| Supply current in Sleep mode IDD | 60 MHz; all peripherals disabled; TA = 25 °C | typ 3.7 · max 4.1 mA | 69 |
| Supply current in Sleep mode IDD | 60 MHz; all peripherals disabled; TA = 85 °C | max 5.1 mA | 69 |
| Supply current in Sleep mode IDD | 60 MHz; all peripherals disabled; TA = 105 °C | max 6.1 mA | 69 |
| Supply current in Sleep mode IDD | 40 MHz; all peripherals disabled; TA = 25 °C | typ 2.9 · max 3.1 mA | 69 |
| Supply current in Sleep mode IDD | 40 MHz; all peripherals disabled; TA = 85 °C | max 4.1 mA | 69 |
| Supply current in Sleep mode IDD | 40 MHz; all peripherals disabled; TA = 105 °C | max 5.1 mA | 69 |
| Supply current in Sleep mode IDD | 30 MHz; all peripherals disabled; TA = 25 °C | typ 2.7 · max 3.1 mA | 69 |
| Supply current in Sleep mode IDD | 30 MHz; all peripherals disabled; TA = 85 °C | max 4.1 mA | 69 |
| Supply current in Sleep mode IDD | 30 MHz; all peripherals disabled; TA = 105 °C | max 5.1 mA | 69 |
| Supply current in Sleep mode IDD | 20 MHz; all peripherals disabled; TA = 25 °C | typ 2.7 · max 3.1 mA | 69 |
| Supply current in Sleep mode IDD | 20 MHz; all peripherals disabled; TA = 85 °C | max 4.1 mA | 69 |
| Supply current in Sleep mode IDD | 20 MHz; all peripherals disabled; TA = 105 °C | max 5.1 mA | 69 |
| Main regulator usage IDD_STOP | Flash in Stop mode; all oscillators OFF; no independent watchdog; TA = 25 °C | typ 109 · max 135 uA | 69 |
| Main regulator usage IDD_STOP | Flash in Stop mode; all oscillators OFF; no independent watchdog; TA = 85 °C | max 440 uA | 69 |
| Main regulator usage IDD_STOP | Flash in Stop mode; all oscillators OFF; no independent watchdog; TA = 105 °C | max 650 uA | 69 |
| Low power regulator usage IDD_STOP | Flash in Stop mode; all oscillators OFF; no independent watchdog; TA = 25 °C | typ 41 · max 65 uA | 69 |
| Low power regulator usage IDD_STOP | Flash in Stop mode; all oscillators OFF; no independent watchdog; TA = 85 °C | max 310 uA | 69 |
| Low power regulator usage IDD_STOP | Flash in Stop mode; all oscillators OFF; no independent watchdog; TA = 105 °C | max 530 uA | 69 |
| Main regulator usage IDD_STOP | Flash in Deep power down mode; all oscillators OFF; no independent watchdog; TA = 25 °C | typ 72 · max 95 uA | 69 |
| Main regulator usage IDD_STOP | Flash in Deep power down mode; all oscillators OFF; no independent watchdog; TA = 85 °C | max 345 uA | 69 |
| Main regulator usage IDD_STOP | Flash in Deep power down mode; all oscillators OFF; no independent watchdog; TA = 105 °C | max 530 uA | 69 |
| Low power regulator usage IDD_STOP | Flash in Deep power down mode; all oscillators OFF; no independent watchdog; TA = 25 °C | typ 12 · max 36 uA | 69 |
| Low power regulator usage IDD_STOP | Flash in Deep power down mode; all oscillators OFF; no independent watchdog; TA = 85 °C | max 260 uA | 69 |
| Low power regulator usage IDD_STOP | Flash in Deep power down mode; all oscillators OFF; no independent watchdog; TA = 105 °C | max 510 uA | 69 |
| Low power low voltage regulator usage IDD_STOP | Flash in Deep power down mode; all oscillators OFF; no independent watchdog; TA = 25 °C | typ 10 · max 27 uA | 69 |
| Low power low voltage regulator usage IDD_STOP | Flash in Deep power down mode; all oscillators OFF; no independent watchdog; TA = 85 °C | max 230 uA | 69 |
| Low power low voltage regulator usage IDD_STOP | Flash in Deep power down mode; all oscillators OFF; no independent watchdog; TA = 105 °C | max 460 uA | 69 |
| Main regulator usage IDD_STOP | Flash in Stop mode; all oscillators OFF; no independent watchdog; TA = 25 °C | typ 111 · max 140 uA | 70 |
| Main regulator usage IDD_STOP | Flash in Stop mode; all oscillators OFF; no independent watchdog; TA = 85 °C | max 450 uA | 70 |
| Main regulator usage IDD_STOP | Flash in Stop mode; all oscillators OFF; no independent watchdog; TA = 105 °C | max 670 uA | 70 |
| Low power regulator usage IDD_STOP | Flash in Stop mode; all oscillators OFF; no independent watchdog; TA = 25 °C | typ 42 · max 65 uA | 70 |
| Low power regulator usage IDD_STOP | Flash in Stop mode; all oscillators OFF; no independent watchdog; TA = 85 °C | max 330 uA | 70 |
| Low power regulator usage IDD_STOP | Flash in Stop mode; all oscillators OFF; no independent watchdog; TA = 105 °C | max 560 uA | 70 |
| Main regulator usage IDD_STOP | Flash in Deep power down mode; all oscillators OFF; no independent watchdog; TA = 25 °C | typ 73 · max 100 uA | 70 |
| Main regulator usage IDD_STOP | Flash in Deep power down mode; all oscillators OFF; no independent watchdog; TA = 85 °C | max 360 uA | 70 |
| Main regulator usage IDD_STOP | Flash in Deep power down mode; all oscillators OFF; no independent watchdog; TA = 105 °C | max 560 uA | 70 |
| Low power regulator usage IDD_STOP | Flash in Deep power down mode; all oscillators OFF; no independent watchdog; TA = 25 °C | typ 12 · max 36 uA | 70 |
| Low power regulator usage IDD_STOP | Flash in Deep power down mode; all oscillators OFF; no independent watchdog; TA = 85 °C | max 270 uA | 70 |
| Low power regulator usage IDD_STOP | Flash in Deep power down mode; all oscillators OFF; no independent watchdog; TA = 105 °C | max 520 uA | 70 |
| Low power low voltage regulator usage IDD_STOP | Flash in Deep power down mode; all oscillators OFF; no independent watchdog; TA = 25 °C | typ 10 · max 28 uA | 70 |
| Low power low voltage regulator usage IDD_STOP | Flash in Deep power down mode; all oscillators OFF; no independent watchdog; TA = 85 °C | max 230 uA | 70 |
| Low power low voltage regulator usage IDD_STOP | Flash in Deep power down mode; all oscillators OFF; no independent watchdog; TA = 105 °C | max 470 uA | 70 |
| Supply current in Standby mode IDD_STBY | Low-speed oscillator (LSE) and RTC ON; TA = 25 °C | typ 2.4 · max 4 uA | 70 |
| Supply current in Standby mode IDD_STBY | LSE and RTC ON; TA = 85 °C | max 12 uA | 70 |
| Supply current in Standby mode IDD_STBY | LSE and RTC ON; TA = 105 °C | max 24 uA | 70 |
| Supply current in Standby mode IDD_STBY | RTC and LSE OFF; TA = 25 °C | typ 1.8 · max 3 uA | 70 |
| Supply current in Standby mode IDD_STBY | RTC and LSE OFF; TA = 85 °C | max 11 uA | 70 |
| Supply current in Standby mode IDD_STBY | RTC and LSE OFF; TA = 105 °C | max 23 uA | 70 |
| Supply current in Standby mode IDD_STBY | LSE and RTC ON; TA = 25 °C | typ 2.8 · max 5 uA | 70 |
| Supply current in Standby mode IDD_STBY | LSE and RTC ON; TA = 85 °C | max 14 uA | 70 |
| Supply current in Standby mode IDD_STBY | LSE and RTC ON; TA = 105 °C | max 28 uA | 70 |
| Supply current in Standby mode IDD_STBY | RTC and LSE OFF; TA = 25 °C | typ 2.1 · max 4 uA | 70 |
| Supply current in Standby mode IDD_STBY | RTC and LSE OFF; TA = 85 °C | max 13 uA | 70 |
| Supply current in Standby mode IDD_STBY | RTC and LSE OFF; TA = 105 °C | max 27 uA | 70 |
| Backup domain supply current IDD_VBAT | LSE and RTC ON; TA = 25 °C; VBAT = 1.7 V | typ 0.66 uA | 71 |
| Backup domain supply current IDD_VBAT | LSE and RTC ON; TA = 25 °C; VBAT = 2.4 V | typ 0.76 uA | 71 |
| Backup domain supply current IDD_VBAT | LSE and RTC ON; TA = 25 °C; VBAT = 3.3 V | typ 0.97 uA | 71 |
| Backup domain supply current IDD_VBAT | LSE and RTC ON; TA = 85 °C; VBAT = 3.6 V | max 3 uA | 71 |
| Backup domain supply current IDD_VBAT | LSE and RTC ON; TA = 105 °C; VBAT = 3.6 V | max 5 uA | 71 |
| Backup domain supply current IDD_VBAT | RTC and LSE OFF; TA = 25 °C; VBAT = 1.7 V | typ 0.1 uA | 71 |
| Backup domain supply current IDD_VBAT | RTC and LSE OFF; TA = 25 °C; VBAT = 2.4 V | typ 0.1 uA | 71 |
| Backup domain supply current IDD_VBAT | RTC and LSE OFF; TA = 25 °C; VBAT = 3.3 V | typ 0.1 uA | 71 |
| Backup domain supply current IDD_VBAT | RTC and LSE OFF; TA = 85 °C; VBAT = 3.6 V | max 2 uA | 71 |
| Backup domain supply current IDD_VBAT | RTC and LSE OFF; TA = 105 °C; VBAT = 3.6 V | max 4 uA | 71 |
| GPIOA IDD | AHB1; HCLK = 84 MHz; VDD = 3.3 V; TA = 25 °C; ART ON; voltage Scale 2 | typ 1.55 uA/MHz | 74 |
| GPIOB IDD | AHB1; HCLK = 84 MHz; VDD = 3.3 V; TA = 25 °C; ART ON; voltage Scale 2 | typ 1.55 uA/MHz | 74 |
| GPIOC IDD | AHB1; HCLK = 84 MHz; VDD = 3.3 V; TA = 25 °C; ART ON; voltage Scale 2 | typ 1.55 uA/MHz | 74 |
| GPIOD IDD | AHB1; HCLK = 84 MHz; VDD = 3.3 V; TA = 25 °C; ART ON; voltage Scale 2 | typ 1.55 uA/MHz | 74 |
| GPIOE IDD | AHB1; HCLK = 84 MHz; VDD = 3.3 V; TA = 25 °C; ART ON; voltage Scale 2 | typ 1.55 uA/MHz | 74 |
| GPIOH IDD | AHB1; HCLK = 84 MHz; VDD = 3.3 V; TA = 25 °C; ART ON; voltage Scale 2 | typ 1.55 uA/MHz | 74 |
| CRC IDD | AHB1; HCLK = 84 MHz; VDD = 3.3 V; TA = 25 °C; ART ON; voltage Scale 2 | typ 0.36 uA/MHz | 74 |
| DMA1 IDD | AHB1; HCLK = 84 MHz; VDD = 3.3 V; TA = 25 °C; ART ON; voltage Scale 2 | typ 20.24 uA/MHz | 74 |
| DMA2 IDD | AHB1; HCLK = 84 MHz; VDD = 3.3 V; TA = 25 °C; ART ON; voltage Scale 2 | typ 21.07 uA/MHz | 74 |
| TIM2 IDD | APB1; fPCLK1 = 42 MHz; VDD = 3.3 V; TA = 25 °C | typ 11.19 uA/MHz | 74 |
| TIM3 IDD | APB1; fPCLK1 = 42 MHz; VDD = 3.3 V; TA = 25 °C | typ 8.57 uA/MHz | 74 |
| TIM4 IDD | APB1; fPCLK1 = 42 MHz; VDD = 3.3 V; TA = 25 °C | typ 8.33 uA/MHz | 74 |
| TIM5 IDD | APB1; fPCLK1 = 42 MHz; VDD = 3.3 V; TA = 25 °C | typ 11.19 uA/MHz | 74 |
| PWR IDD | APB1; fPCLK1 = 42 MHz; VDD = 3.3 V; TA = 25 °C | typ 0.71 uA/MHz | 74 |
| USART2 IDD | APB1; fPCLK1 = 42 MHz; VDD = 3.3 V; TA = 25 °C | typ 3.33 uA/MHz | 74 |
| I2C1/2/3 IDD | APB1; fPCLK1 = 42 MHz; VDD = 3.3 V; TA = 25 °C | typ 3.1 uA/MHz | 74 |
| SPI2 IDD | APB1; fPCLK1 = 42 MHz; VDD = 3.3 V; TA = 25 °C; I2SMOD and I2SE set | typ 2.62 uA/MHz | 74 |
| SPI3 IDD | APB1; fPCLK1 = 42 MHz; VDD = 3.3 V; TA = 25 °C; I2SMOD and I2SE set | typ 2.86 uA/MHz | 74 |
| I2S2 IDD | APB1; fPCLK1 = 42 MHz; VDD = 3.3 V; TA = 25 °C | typ 1.9 uA/MHz | 74 |
| I2S3 IDD | APB1; fPCLK1 = 42 MHz; VDD = 3.3 V; TA = 25 °C | typ 1.67 uA/MHz | 74 |
| WWDG IDD | APB1; fPCLK1 = 42 MHz; VDD = 3.3 V; TA = 25 °C | typ 0.71 uA/MHz | 74 |
| OTG_FS IDD | AHB2; HCLK = 84 MHz; VDD = 3.3 V; TA = 25 °C | typ 23.93 uA/MHz | 74 |
| TIM1 IDD | APB2; fPCLK2 = 84 MHz; VDD = 3.3 V; TA = 25 °C | typ 5.71 uA/MHz | 75 |
| TIM9 IDD | APB2; fPCLK2 = 84 MHz; VDD = 3.3 V; TA = 25 °C | typ 2.86 uA/MHz | 75 |
| TIM10 IDD | APB2; fPCLK2 = 84 MHz; VDD = 3.3 V; TA = 25 °C | typ 1.79 uA/MHz | 75 |
| TIM11 IDD | APB2; fPCLK2 = 84 MHz; VDD = 3.3 V; TA = 25 °C | typ 2.02 uA/MHz | 75 |
| ADC1 IDD | APB2; fPCLK2 = 84 MHz; VDD = 3.3 V; TA = 25 °C; add 1.6 mA for analog part when ADC ON | typ 2.98 uA/MHz | 75 |
| SPI1 IDD | APB2; fPCLK2 = 84 MHz; VDD = 3.3 V; TA = 25 °C | typ 1.19 uA/MHz | 75 |
| USART1 IDD | APB2; fPCLK2 = 84 MHz; VDD = 3.3 V; TA = 25 °C | typ 3.1 uA/MHz | 75 |
| USART6 IDD | APB2; fPCLK2 = 84 MHz; VDD = 3.3 V; TA = 25 °C | typ 2.86 uA/MHz | 75 |
| SDIO IDD | APB2; fPCLK2 = 84 MHz; VDD = 3.3 V; TA = 25 °C | typ 5.95 uA/MHz | 75 |
| SPI4 IDD | APB2; fPCLK2 = 84 MHz; VDD = 3.3 V; TA = 25 °C | typ 1.31 uA/MHz | 75 |
| SYSCFG IDD | APB2; fPCLK2 = 84 MHz; VDD = 3.3 V; TA = 25 °C | typ 0.71 uA/MHz | 75 |
| Wakeup from Sleep mode tWUSLEEP | VDD = 3.3 V; wakeup event WFE | typ 4 · max 6 CPU clock cycle | 75 |
| Wakeup from Stop mode, usage of main regulator tWUSTOP | VDD = 3.3 V; wakeup event WFE | typ 13.5 · max 14.5 us | 75 |
| Wakeup from Stop mode, usage of main regulator, Flash memory in Deep power down mode tWUSTOP | VDD = 3.3 V; wakeup event WFE | typ 105 · max 111 us | 75 |
| Wakeup from Stop mode, regulator in low power mode tWUSTOP | VDD = 3.3 V; wakeup event WFE | typ 21 · max 33 us | 75 |
| Wakeup from Stop mode, regulator in low power mode, Flash memory in Deep power down mode tWUSTOP | VDD = 3.3 V; wakeup event WFE | typ 113 · max 130 us | 75 |
| Wakeup from Standby mode tWUSTDBY | VDD = 3.3 V; WKUP (PA0); maximum at –40 °C | typ 314 · max 407 us | 75 |
| Oscillator frequency fOSC_IN | min 4 · max 26 MHz | 78 | |
| Feedback resistor RF | typ 200 kΩ | 78 | |
| HSE current consumption IDD | VDD = 3.3 V; ESR = 30 Ω; CL = 5 pF @25 MHz | typ 450 uA | 78 |
| HSE current consumption IDD | VDD = 3.3 V; ESR = 30 Ω; CL = 10 pF @25 MHz | typ 530 uA | 78 |
| Maximum critical crystal gm Gm_crit_max | Startup | max 1 mA/V | 78 |
| Startup time tSU(HSE) | VDD is stabilized; standard crystal resonator; stabilized 8 MHz oscillation | typ 2 ms | 78 |
| Feedback resistor RF | fLSE = 32.768 kHz | typ 18.4 MΩ | 79 |
| LSE current consumption IDD | fLSE = 32.768 kHz | max 1 uA | 79 |
| Maximum critical crystal gm Gm_crit_max | Startup | max 0.56 uA/V | 79 |
| startup time tSU(LSE) | VDD is stabilized | typ 2 s | 79 |
| Frequency fHSI | VDD = 3.3 V, TA = –40 to 105 °C | typ 16 MHz | 80 |
| Accuracy of the HSI oscillator ACCHSI | User-trimmed with the RCC_CR register; VDD = 3.3 V, TA = –40 to 105 °C | max 1 % | 80 |
| Accuracy of the HSI oscillator ACCHSI | Factory-calibrated, TA = –40 to 105 °C, VDD = 3.3 V | min -8 · max 4.5 % | 80 |
| Accuracy of the HSI oscillator ACCHSI | Factory-calibrated, TA = 25 °C, VDD = 3.3 V | min -1 · max 1 % | 80 |
| HSI oscillator startup time tsu(HSI) | VDD = 3.3 V, TA = –40 to 105 °C | typ 2.2 · max 4 us | 80 |
| HSI oscillator power consumption IDD(HSI) | VDD = 3.3 V, TA = –40 to 105 °C | typ 60 · max 80 uA | 80 |
| PLL power consumption on VDD IDD(PLL) | VCO freq = 192 MHz | min 0.15 · max 0.4 mA | 83 |
| PLL power consumption on VDD IDD(PLL) | VCO freq = 432 MHz | min 0.45 · max 0.75 mA | 83 |
| PLL power consumption on VDDA IDDA(PLL) | VCO freq = 192 MHz | min 0.3 · max 0.4 mA | 83 |
| PLL power consumption on VDDA IDDA(PLL) | VCO freq = 432 MHz | min 0.55 · max 0.85 mA | 83 |
| PLLI2S input clock fPLLI2S_IN | min 0.95 · typ 1 · max 2.1 MHz | 83 | |
| PLLI2S multiplier output clock fPLLI2S_OUT | max 216 MHz | 83 | |
| PLLI2S VCO output fVCO_OUT | min 192 · max 432 MHz | 83 | |
| PLLI2S lock time tLOCK | VCO freq = 192 MHz | min 75 · max 200 us | 83 |
| PLLI2S lock time tLOCK | VCO freq = 432 MHz | min 100 · max 300 us | 83 |
| Master I2S clock jitter Jitter | Cycle to cycle at 12.288 MHz on 48 KHz period, N=432, R=5; RMS; main PLL running | typ 90 ps | 83 |
| Master I2S clock jitter Jitter | Average frequency of 12.288 MHz, N = 432, R = 5, on 1000 samples; main PLL running | typ 90 ps | 83 |
| WS I2S clock jitter Jitter | Cycle to cycle at 48 KHz on 1000 samples; main PLL running | typ 400 ps | 83 |
| PLLI2S power consumption on VDD IDD(PLLI2S) | VCO freq = 192 MHz | min 0.15 · max 0.4 mA | 83 |
| PLLI2S power consumption on VDD IDD(PLLI2S) | VCO freq = 432 MHz | min 0.45 · max 0.75 mA | 83 |
| PLLI2S power consumption on VDDA IDDA(PLLI2S) | VCO freq = 192 MHz | min 0.3 · max 0.4 mA | 83 |
| PLLI2S power consumption on VDDA IDDA(PLLI2S) | VCO freq = 432 MHz | min 0.55 · max 0.85 mA | 83 |
| Supply current IDD | Write / Erase 8-bit mode, VDD = 1.7 V; TA = –40 to 105 °C | typ 5 mA | 85 |
| Supply current IDD | Write / Erase 16-bit mode, VDD = 2.1 V; TA = –40 to 105 °C | typ 8 mA | 85 |
| Supply current IDD | Write / Erase 32-bit mode, VDD = 3.3 V; TA = –40 to 105 °C | typ 12 mA | 85 |
| Electrostatic discharge voltage (human body model) VESD(HBM) | TA = +25 °C conforming to JESD22-A114; Class 2 | max 2000 V | 90 |
| Electrostatic discharge voltage (charge device model) VESD(CDM) | TA = +25 °C conforming to ANSI/ESD STM5.3.1; Class II | max 400 V | 90 |
| Output low level voltage for an I/O pin VOL | CMOS port, IIO = +8 mA, 2.7 V ≤ VDD ≤ 3.6 V | max 0.4 V | 94 |
| Output low level voltage for an I/O pin VOL | TTL port, IIO =+8 mA, 2.7 V ≤ VDD ≤ 3.6 V | max 0.4 V | 94 |
| Output high level voltage for an I/O pin VOH | TTL port, IIO =+8 mA, 2.7 V ≤ VDD ≤ 3.6 V | min 2.4 V | 94 |
| Output low level voltage for an I/O pin VOL | IIO = +20 mA, 2.7 V ≤ VDD ≤ 3.6 V | max 1.3 V | 94 |
| Output low level voltage for an I/O pin VOL | IIO = +6 mA, 1.8 V ≤ VDD ≤ 3.6 V | max 0.4 V | 94 |
| Output low level voltage for an I/O pin VOL | IIO = +4 mA, 1.7 V ≤ VDD ≤ 3.6 V | max 0.4 V | 94 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 00, CL = 50 pF, VDD ≥ 2.70 V | max 4 MHz | 94 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 00, CL = 50 pF, VDD≥ 1.7 V | max 2 MHz | 94 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 00, CL = 10 pF, VDD ≥ 2.70 V | max 8 MHz | 94 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 00, CL = 10 pF, VDD ≥ 1.7 V | max 4 MHz | 94 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 00, CL = 50 pF, VDD = 1.7 V to 3.6 V | max 100 ns | 94 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 01, CL = 50 pF, VDD ≥ 2.70 V | max 25 MHz | 95 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 01, CL = 50 pF, VDD ≥ 1.7 V | max 12.5 MHz | 95 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 01, CL = 10 pF, VDD ≥ 2.70 V | max 50 MHz | 95 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 01, CL = 10 pF, VDD ≥ 1.7 V | max 20 MHz | 95 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 01, CL = 50 pF, VDD ≥2.7 V | max 10 ns | 95 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 01, CL = 50 pF, VDD ≥ 1.7 V | max 20 ns | 95 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 01, CL = 10 pF, VDD ≥ 2.70 V | max 6 ns | 95 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 01, CL = 10 pF, VDD ≥ 1.7 V | max 10 ns | 95 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 10, CL = 40 pF, VDD ≥ 2.70 V | max 50 MHz | 95 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 10, CL = 40 pF, VDD ≥ 1.7 V | max 25 MHz | 95 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 10, CL = 10 pF, VDD ≥ 2.70 V | max 100 MHz | 95 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 10, CL = 10 pF, VDD ≥ 1.7 V | max 50 MHz | 95 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 10, CL = 40 pF, VDD≥ 2.70 V | max 6 ns | 95 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 10, CL = 40 pF, VDD≥ 1.7 V | max 10 ns | 95 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 10, CL = 10 pF, VDD≥ 2.70 V | max 4 ns | 95 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 10, CL = 10 pF, VDD≥ 1.7 V | max 6 ns | 95 |
| Maximum frequency Fmax(IO)out | OSPEEDRy[1:0] = 11, CL = 30 pF, VDD ≥ 2.70 V | max 100 MHz | 95 |
| Maximum frequency Fmax(IO)out | OSPEEDRy[1:0] = 11, CL = 30 pF, VDD ≥ 1.7 V | max 50 MHz | 95 |
| Maximum frequency Fmax(IO)out | OSPEEDRy[1:0] = 11, CL = 10 pF, VDD ≥ 2.70 V | max 180 MHz | 95 |
| Maximum frequency Fmax(IO)out | OSPEEDRy[1:0] = 11, CL = 10 pF, VDD≥ 1.7 V | max 100 MHz | 95 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 11, CL = 30 pF, VDD ≥ 2.70 V | max 4 ns | 95 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 11, CL = 30 pF, VDD ≥ 1.7 V | max 6 ns | 95 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 11, CL = 10 pF, VDD≥ 2.70 V | max 2.5 ns | 95 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 11, CL = 10 pF, VDD≥ 1.7 V | max 4 ns | 95 |
| Pulse width of external signals detected by the EXTI controller tEXTIpw | min 10 ns | 95 | |
| USB OTG FS transceiver startup time tSTARTUP | max 1 us | 105 | |
| USB OTG FS operating voltage VDD | min 3 · max 3.6 V | 105 | |
| Differential input sensitivity VDI | I(USB_FS_DP/DM) | min 0.2 V | 105 |
| Differential common mode range VCM | Includes VDI range | min 0.8 · max 2.5 V | 105 |
| Single ended receiver threshold VSE | min 1.3 · max 2 V | 105 | |
| Static output level low VOL | RL of 1.5 kΩ to 3.6 V | max 0.3 V | 105 |
| Static output level high VOH | RL of 15 kΩ to VSS | min 2.8 · max 3.6 V | 105 |
| PA11, PA12 (USB_FS_DM/DP) RPD | VIN = VDD | min 17 · typ 21 · max 24 kΩ | 105 |
| PA9 (OTG_FS_VBUS) RPD | VIN = VDD | min 0.65 · typ 1.1 · max 2 kΩ | 105 |
| PA11, PA12 (USB_FS_DM/DP) RPU | VIN = VSS | min 1.5 · typ 1.8 · max 2.1 kΩ | 105 |
| PA9 (OTG_FS_VBUS) RPU | VIN = VSS | min 0.25 · typ 0.37 · max 0.55 kΩ | 105 |
| Rise time tr | CL = 50 pF | min 4 · max 20 ns | 106 |
| Fall time tf | CL = 50 pF | min 4 · max 20 ns | 106 |
| Rise/ fall time matching trfm | tr/tf | min 90 · max 110 % | 106 |
| Output signal crossover voltage VCRS | min 1.3 · max 2 V | 106 | |
| Power supply VDDA | 1.7 V minimum requires an external power supply supervisor | min 1.7 · max 3.6 V | 106 |
| Positive reference voltage VREF+ | VDDA − VREF+ < 1.2 V; VREF+ internally connected to VDDA | min 1.7 V | 106 |
| ADC clock frequency fADC | VDDA = 1.7 to 2.4 V | min 0.6 · typ 15 · max 18 MHz | 106 |
| ADC clock frequency fADC | VDDA = 2.4 to 3.6 V | min 0.6 · typ 30 · max 36 MHz | 106 |
| External trigger frequency fTRIG | fADC = 30 MHz, 12-bit resolution | max 1764 kHz | 106 |
| External trigger frequency fTRIG | fADC = 30 MHz, 12-bit resolution | max 17 1/fADC | 106 |
| External input impedance RAIN | See Equation 1 for details | max 50 kΩ | 106 |
| Sampling switch resistance RADC | Maximum given for VDD=1.7 V | max 6 kΩ | 106 |
| Internal sample and hold capacitor CADC | typ 4 · max 7 pF | 106 | |
| Injection trigger conversion latency tlat | fADC = 30 MHz; external triggers require an additional 1/fPCLK2 delay | max 0.1 us | 107 |
| Injection trigger conversion latency tlat | External triggers require an additional 1/fPCLK2 delay | max 3 1/fADC | 107 |
| Regular trigger conversion latency tlatr | fADC = 30 MHz; external triggers require an additional 1/fPCLK2 delay | max 0.067 us | 107 |
| Regular trigger conversion latency tlatr | External triggers require an additional 1/fPCLK2 delay | max 2 1/fADC | 107 |
| Sampling time tS | fADC = 30 MHz | min 0.1 · max 16 us | 107 |
| Sampling time tS | min 3 · max 480 1/fADC | 107 | |
| Power-up time tSTAB | typ 2 · max 3 us | 107 | |
| Total conversion time (including sampling time) tCONV | fADC = 30 MHz, 12-bit resolution | min 0.5 · max 16.4 us | 107 |
| Total conversion time (including sampling time) tCONV | fADC = 30 MHz, 10-bit resolution | min 0.43 · max 16.34 us | 107 |
| Total conversion time (including sampling time) tCONV | fADC = 30 MHz, 8-bit resolution | min 0.37 · max 16.27 us | 107 |
| Total conversion time (including sampling time) tCONV | fADC = 30 MHz, 6-bit resolution | min 0.3 · max 16.2 us | 107 |
| Total conversion time (including sampling time) tCONV | tS for sampling +n-bit resolution for successive approximation | min 9 · max 492 1/fADC | 107 |
| Sampling rate (fADC = 30 MHz, and tS = 3 ADC cycles) fS | 12-bit resolution, Single ADC | max 2 Msps | 107 |
| ADC VREF DC current consumption in conversion mode IVREF+ | typ 300 · max 500 uA | 107 | |
| ADC VDDA DC current consumption in conversion mode IVDDA | typ 1.6 · max 1.8 mA | 107 |
Pins, by the datasheet
2- 63 VSS
- Ground. · p. 44
- 64 VDD
- Supply. · p. 44
Parameters
18- ADC (Bit)
- 12bit
- CPU Core
- ARM Cortex-M4
- CPU Maximum Speed
- 84MHz
- Core Size
- 32 Bit
- Current - Supply
- 23.4mA
- Current - Supply(Max)
- 36.3mA
- Junction Temperature(Max)
- 105℃
- Number of I/O
- 50
- Operating Temperature
- -40℃~+105℃
- Oscillator Type
- Built-in
- Output Current per Pin(Max)
- 25mA
- Program Memory Type
- FLASH
- Program Storage Size
- 512KB
- RAM Size
- 96KB
- Standby Current
- 2.1uA
- Thermal Resistance(Junction to Ambient)
- 50℃/W
- Voltage - Supply
- 1.65V~3.6V
- Voltage - Supply(Absolute Max)
- 4V
Order codes
5- STM32F401RET6LCSC C116978
- STM32F401RET6TRLCSC C2053837
- STM32F401RET6LCSC C882044
- STM32F401RET6LCSC C882045
- STM32F401RET6LCSC C910997
Pinout
64| Pin | Name | Type |
|---|---|---|
| 1 | VBAT | Power in |
| 2 | PC13 | Input/output |
| 3 | PC14 | Input/output |
| 4 | PC15 | Input/output |
| 5 | PH0 | Input/output |
| 6 | PH1 | Input/output |
| 7 | NRST | Input |
| 8 | PC0 | Input/output |
| 9 | PC1 | Input/output |
| 10 | PC2 | Input/output |
| 11 | PC3 | Input/output |
| 12 | VSSA | Power in |
| 13 | VREF+ | Input |
| 14 | PA0 | Input/output |
| 15 | PA1 | Input/output |
| 16 | PA2 | Input/output |
| 17 | PA3 | Input/output |
| 18 | VSS | Power in |
| 19 | VDD | Power in |
| 20 | PA4 | Input/output |
| 21 | PA5 | Input/output |
| 22 | PA6 | Input/output |
| 23 | PA7 | Input/output |
| 24 | PC4 | Input/output |
| 25 | PC5 | Input/output |
| 26 | PB0 | Input/output |
| 27 | PB1 | Input/output |
| 28 | PB2 | Input/output |
| 29 | PB10 | Input/output |
| 30 | VCAP1 | Power out |
| 31 | VSS | Passive |
| 32 | VDD | Power in |
| 33 | PB12 | Input/output |
| 34 | PB13 | Input/output |
| 35 | PB14 | Input/output |
| 36 | PB15 | Input/output |
| 37 | PC6 | Input/output |
| 38 | PC7 | Input/output |
| 39 | PC8 | Input/output |
| 40 | PC9 | Input/output |
| 41 | PA8 | Input/output |
| 42 | PA9 | Input/output |
| 43 | PA10 | Input/output |
| 44 | PA11 | Input/output |
| 45 | PA12 | Input/output |
| 46 | PA13 | Input/output |
| 47 | VSS | Passive |
| 48 | VDD | Power in |
| 49 | PA14 | Input/output |
| 50 | PA15 | Input/output |
| 51 | PC10 | Input/output |
| 52 | PC11 | Input/output |
| 53 | PC12 | Input/output |
| 54 | PD2 | Input/output |
| 55 | PB3 | Input/output |
| 56 | PB4 | Input/output |
| 57 | PB5 | Input/output |
| 58 | PB6 | Input/output |
| 59 | PB7 | Input/output |
| 60 | BOOT0 | Input |
| 61 | PB8 | Input/output |
| 62 | PB9 | Input/output |
| 63 | VSS | Passive |
| 64 | VDD | Power in |
Open-source boards using it
All 9- 2 layers80 × 60 mm
VantageF401RE
AthulKrishnaGirish/VantageF401RE
STM32F401RE-based 2-layer evaluation and development board designed for the Mixed Traces PCB Design Competition.
47 parts - 4 layers100 × 62 mm
Etch a sketch
disposedtrolley/etch-a-sketch
STM32-based Etch A Sketch widget with an OLED display and rotary encoders.
38 parts - 4 layers123.5 × 108.7 mm
Shredder pcb
jackmday-uofa/compact-shredder-pcb
PCB schematic and design for the Compact Shredder Design Version 2
114 parts - 2 layers100 × 100 mm
- 4 layers60 × 60 mm
- 2 layers100 × 100 mm
MIXED TRACE (STM32F401RET6)
navaneeth-linh/CoreTrace-CT-F401RE
STM32F401RET6 Evaluation Board — Mixed Traces PCB Design Competition 2026 | Team CoreTrace
43 parts - 4 layers41.5 × 44.6 mm
AHRSNEW
Prakhar730/AHRS_PCB_Design
Welcome to the official repository for my AHRS project. This project documents the complete hardware design cycle—from component selection and circuit simulation to final PCB layout—for a custom Attitude and Heading…
34 parts
Show this part on your page
<iframe src="https://pcbkit.io/embed/parts/st/STM32F401RET6" title="STM32F401RET6 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/st/STM32F401RET6.jpg" alt="STM32F401RET6" width="1200" height="900">[](https://pcbkit.io/parts/st/STM32F401RET6)Questions
Is there a KiCad symbol and footprint for the STM32F401RET6?
Yes. The symbol is MCU_ST_STM32F4:STM32F401RETx and the footprint Package_QFP:LQFP-64_10x10mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the STM32F401RET6?
LQFP-64(10x10), with 64 pins. Its footprint is drawn on this page.
Where is the STM32F401RET6 datasheet?
STMicroelectronics publishes it: the Datasheet link on this page opens it.
Where can I order the STM32F401RET6?
JLCPCB lists it as part C116978, with 555 in stock; the sellers' links on this page open their listings.
What can replace the STM32F401RET6?
Parts like it in the library: the GD32F103RBT6 by GigaDevice, the GD32F103RCT6 by GigaDevice, the GD32F303RCT6 by GigaDevice and the STM32F412RET6 by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the STM32F401RET6?
9 boards in 9 repositories on GitHub; the most starred are listed on this page, with their KiCad files.
Parts like it
8
GD32F103RBT6
LQFP-64(10x10)108MHz 128KB 12bit 2.6V~3.6V 51 ARM Cortex-M3 FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSGigaDeviceMicrocontrollers (MCU/MPU/SOC)GD32F103RCT6
LQFP-64(10x10)108MHz 12bit 12bit 2.6V~3.6V 256KB 51 ARM Cortex-M3 FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSGigaDeviceMicrocontrollers (MCU/MPU/SOC)GD32F303RCT6
LQFP-64(10x10)120MHz 12bit 12bit 2.6V~3.6V 256KB 51 ARM Cortex-M4 FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSGigaDeviceMicrocontrollers (MCU/MPU/SOC)STM32F412RET6
LQFP-64(10x10)-40℃~+85℃ 1.7V~3.6V 100MHz 12bit 256KB 32 Bit 50 512KB ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)AT32F403ARCT7
LQFP-64(10x10)-40℃~+105℃ 2.6V~3.6V 224Byte 240MHz 256KB 32 Bit 51 ARM Cortex-M4F Built-in+External FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSARTERYMicrocontrollers (MCU/MPU/SOC)STM32F402RCT6
LQFP-64(10x10)LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32G474RBT3
LQFP-64(10x10)-40℃~+125℃ 1.71V~3.6V 128KB 128KB 12bit 12bit 170MHz 32 Bit 52 ARM Cortex-M4F Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)AT32F403ARGT7
LQFP-64(10x10)-40℃~+105℃ 1MB 2.6V~3.6V 224Byte 240MHz 32 Bit 51 ARM Cortex-M4F Built-in+External FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSARTERYMicrocontrollers (MCU/MPU/SOC)