

VantageF401RE
STM32F401RE-based 2-layer evaluation and development board designed for the Mixed Traces PCB Design Competition.
- Size
- 80 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 69
- Pads
- 213
- Tracks, vias
- 936, 131
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 5 Sep 2026
- Updated
- 16 Sep 2026
Overview
VantageF401RE is an open-source printed circuit board by AthulKrishnaGirish, from the AthulKrishnaGirish/VantageF401RE repository on GitHub. It is a 2-layer board of 80 × 60 mm with 47 parts on 69 nets, routed with 936 tracks and 131 vias.
It is built around the STM32F401RET6, AP2112K-3.3 and USBLC6-2SC6, with the SS14 among its other parts. Its parts include 12 capacitors, 12 resistors, 8 connectors, 4 diodes and 3 ICs. It belongs with the microcontroller boards boards and the STM32 boards of this library.
Main components
4STM32F401RET6
LQFP-64(10x10)-40℃~+85℃ 1.7V~3.6V 12bit 32 Bit 50 512KB 84MHz 96KB ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorisedUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)SS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
kicad/README.mdVantageF401RE — KiCad Design Files
This folder contains the complete editable KiCad project files for the VantageF401RE, a custom STM32F401RE-based evaluation and development board designed for the Mixed Traces PCB Design Competition by Mixed Signals, Electronics Association of MEC.
The design was developed entirely in KiCad as a 2-layer PCB, with a focus on functionality, accessibility, protection, compact organization, and practical embedded-system development.
Project Files
| File | Description |
|---|---|
VantageF401RE.kicad_pro | Main KiCad project file |
VantageF401RE.kicad_sch | Complete electrical schematic |
VantageF401RE.kicad_pcb | Final 2-layer PCB layout |
These files can be opened and edited using KiCad.
Board Specifications
| Parameter | Specification |
|---|---|
| MCU | STM32F401RET6 |
| MCU Package | LQFP-64 |
| PCB Layers | 2 |
| Board Size | 80 mm × 60 mm |
| Design Tool | KiCad |
| USB Interface | USB Type-C, USB 2.0 |
| Supply Voltage | 3.3 V regulated |
| External Input | 5 V |
| Debug Interface | SWD |
| Oscillator | 8 MHz external crystal |
The board size remains well within the competition's maximum permitted 100 mm × 100 mm area.
Main Functional Blocks
The VantageF401RE integrates the following functional sections:
1. STM32F401RET6 Core
The STM32F401RET6 serves as the main processing device.
The design includes:
- External 8 MHz crystal oscillator
- VCAP1 capacitor
- MCU power decoupling
- Analog supply decoupling
- Reset circuitry
- BOOT0 configuration
- Dedicated programming/debug access
2. Power Management
The power section provides a regulated 3.3 V supply for the MCU and peripherals.
Features include:
- USB-C 5 V input
- External 5 V input
- AP2112K-3.3 LDO regulator
- Input and output capacitors
- Schottky-diode protection for external 5 V input
- Power LED
- 3.3 V and GND test points
3. USB Interface
A USB-C connector is provided for USB 2.0 connectivity and 5 V power input.
The USB section includes:
- USB Type-C receptacle
- USB D+ and D− connections
- CC1 and CC2 resistors
- USB ESD protection using USBLC6-2SC6
- USB data-line series resistors
- USB status LED
- Dedicated USB 5 V power rail
The USB data path is protected before reaching the STM32 USB pins.
4. SWD Programming and Debugging
A dedicated 5-pin SWD header is provided for programming and debugging the STM32.
The interface exposes:
- VCC
- SWDIO
- GND
- SWCLK
- NRST
Test points are also provided for SWDIO, SWCLK, and NRST.
5. Reset and Boot Configuration
The board provides dedicated controls for reliable startup and debugging.
Features include:
- Hardware reset push button
- NRST pull-up resistor
- BOOT0 pull-down resistor
- BOOT selection header
6. Communication Interfaces
Dedicated headers are provided for commonly used embedded communication protocols.
UART
- UART TX
- UART RX
- 3.3 V
- GND
SPI
- SPI SCK
- SPI MISO
- SPI MOSI
- SPI CS
- 3.3 V
- GND
I²C
- I²C SCL
- I²C SDA
- 3.3 V
- GND
- Dedicated pull-up resistors
7. GPIO Expansion
A dedicated 2×10 GPIO header provides convenient access to multiple STM32 GPIO pins along with power and ground connections.
This allows external sensors, displays, modules, and other peripherals to be connected directly to the board.
8. User Interface
The board includes:
- User push button
- User LED
- Reset button
- Power LED
- USB status LED
- BOOT selection header
These provide basic interaction and visual feedback during development and debugging.
9. Clock and Decoupling
The MCU clock section uses an external 8 MHz crystal oscillator with dedicated load capacitors.
The power network includes:
- Local 100 nF MCU decoupling capacitors
- Bulk 4.7 µF decoupling
- Analog supply filtering
- VCAP1 capacitor
- Regulator input/output capacitors
The decoupling components were placed close to their respective power pins and functional blocks during PCB layout.
10. Test and Debug Access
Dedicated test points are provided for important signals:
- 3.3 V
- GND
- SWDIO
- SWCLK
- NRST
These improve accessibility for oscilloscope probing, debugging, and laboratory measurements.
PCB Layout
The final PCB uses a 2-layer copper stack-up with an 80 mm × 60 mm board outline.
The placement was organized into functional regions, including:
- Central STM32 MCU section
- USB and power section near the board edge
- SWD/debug section
- Communication interface headers
- GPIO expansion
- Clock circuitry
- User-control section
- Power indication
- Test points
Ground planes are used to provide continuous ground-return paths and improve overall PCB organization.
The layout was routed while considering component accessibility, signal paths, power distribution, and the physical constraints of a 2-layer board.
Design Verification
The final schematic and PCB were verified using KiCad's electrical and PCB design-rule checking tools.
ERC
Electrical Rules Check:
- Violations: 0
- Errors: 0
- Warnings: 0
DRC
Design Rules Check:
- Reported violations: 0
- Errors: 0
- Intentional exclusions: 4
The intentional exclusions correspond to reviewed USB-C connector mechanical hole-clearance checks associated with the selected footprint.
Detailed ERC and DRC reports are available in the repository's results/ directory.
Design Approach
The VantageF401RE was designed as a complete development platform rather than only an STM32 breakout board.
The design combines:
Processing + Power + USB + Debugging + Communication + Expansion + User Interface + Protection
within a compact 2-layer PCB.
Particular attention was given to:
- Power integrity
- Local decoupling
- USB protection
- Signal accessibility
- Debug accessibility
- Peripheral expansion
- Component placement
- Ground connectivity
- PCB manufacturability
- Design-rule compliance
Related Repository Folders
The complete project is organized into dedicated sections:
bom/
Contains the component selection and BOM documentation.
docs/
Contains project documentation, including:
- Major design decisions
- Initial block diagram
- Progress evaluation documentation
results/
Contains the final ERC and DRC verification reports.
gerbers/
Contains the final Gerber and drill files prepared for PCB fabrication.
pdf/
Reserved for the final project documentation PDF.
Opening the Project
To inspect or continue development:
- Install a compatible version of KiCad.
- Open
VantageF401RE.kicad_pro. - Open the schematic through the KiCad project manager.
- Open the PCB layout from the same project.
The .kicad_sch and .kicad_pcb files can also be opened individually when required.
Final Design Status
The VantageF401RE design has completed:
- Component selection
- Schematic development
- PCB component placement
- PCB routing
- Power-system implementation
- USB interface implementation
- SWD interface implementation
- UART, SPI and I²C interfaces
- GPIO expansion
- User interface circuitry
- PCB design-rule verification
- Schematic electrical-rule verification
- Gerber and drill-file generation
The files in this directory represent the final editable KiCad design submitted as part of the project.
Project: VantageF401RE
MCU: STM32F401RET6
PCB: 2-Layer, 80 mm × 60 mm
EDA Tool: KiCad
Status: Final Design Completed
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nF | Capacitor_SMD:C_0805_2012Metric | C6, C7, C8, C9, C11 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R4 |
| 3 | 1uF | Capacitor_SMD:C_0805_2012Metric | C4, C5, C12 |
| 2 | 18pF | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R9, R12 |
| 2 | 22R | Resistor_SMD:R_0805_2012Metric | R10, R11 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric | R5, R6 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C1, C10 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R7, R8 |
| 1 | 330R | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 8MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | BOOT_SEL | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | EXT_5V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | GPIO | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J5 |
| 1 | I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | POWER | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | SPI | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | SS14 | Diode_SMD:D_SMA | D3 |
| 1 | STM32F401RET6 | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | TP_3V3 | TestPoint:TestPoint_Plated_Hole_D2.0mm | TP1 |
| 1 | TP_GND | TestPoint:TestPoint_Plated_Hole_D2.0mm | TP2 |
| 1 | TP_NRST | TestPoint:TestPoint_Plated_Hole_D2.0mm | TP5 |
| 1 | TP_SWCLK | TestPoint:TestPoint_Plated_Hole_D2.0mm | TP4 |
| 1 | TP_SWDIO | TestPoint:TestPoint_Plated_Hole_D2.0mm | TP3 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | USB-C | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J6 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USB_STATUS | LED_SMD:LED_0805_2012Metric | D4 |
| 1 | USER_BTN | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | USER_LED | LED_SMD:LED_0805_2012Metric | D1 |
Similar boards
- 2 layers100 × 100 mm

- 2 layers154 × 129.9 mm

- 4 layers123.5 × 108.7 mm

Shredder pcb
jackmday-uofa/compact-shredder-pcb
PCB schematic and design for the Compact Shredder Design Version 2
114 parts - 4 layers100 × 62 mm

Etch a sketch
disposedtrolley/etch-a-sketch
STM32-based Etch A Sketch widget with an OLED display and rotary encoders.
38 parts - 4 layers60 × 60 mm

- 2 layers100 × 100 mm

MIXED TRACE (STM32F401RET6)
navaneeth-linh/CoreTrace-CT-F401RE
STM32F401RET6 Evaluation Board — Mixed Traces PCB Design Competition 2026 | Team CoreTrace
43 parts - 4 layers41.5 × 44.6 mm

AHRSNEW
Prakhar730/AHRS_PCB_Design
Welcome to the official repository for my AHRS project. This project documents the complete hardware design cycle—from component selection and circuit simulation to final PCB layout—for a custom Attitude and Heading…
34 parts - 4 layers118 × 250 mm

Questions
How big is the VantageF401RE PCB?
It measures 80 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the VantageF401RE use?
47 parts, built around the STM32F401RET6, AP2112K-3.3, USBLC6-2SC6 and SS14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the VantageF401RE KiCad files?
From the AthulKrishnaGirish/VantageF401RE repository on GitHub, at the commit this page was made from: the board is kicad/VantageF401RE.kicad_pcb and its schematic kicad/VantageF401RE.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the VantageF401RE design in my own project?
Its repository states no licence, so its author keeps all rights: ask AthulKrishnaGirish before reusing the design.