Skip to the content
1234567891011121314151617181920212223242526272829303132

STM32F042K6T6

STMicroelectronicsExtended

-40℃~+85℃ 1.65V~3.6V 12bit 26 32 Bit 32KB 48MHz 6KB ARM Cortex-M0 Built-in FLASH LQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHS

Part id
st/STM32F042K6T6
Category
Microcontrollers (MCU, MPU, SOC)
Package
LQFP-32(7x7)
Pins
32
In stock
172 at JLCPCB (C69216)
Used on
19 open-source boards

Overview

The STM32F042K6T6 is a microcontroller made by STMicroelectronics in a LQFP-32(7x7) package with 32 pins. -40℃~+85℃ 1.65V~3.6V 12bit 26 32 Bit 32KB 48MHz 6KB ARM Cortex-M0 Built-in FLASH LQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHS.

PCBKit's library has its KiCad symbol (MCU_ST_STM32F0:STM32F042K6Tx, from KiCad's library) and its footprint (Package_QFP:LQFP-32_7x7mm_P0.8mm, from KiCad's library), ready for a KiCad board. 172 are in stock at JLCPCB (part C69216). 19 open-source boards in 16 repositories on GitHub use it.

Symbol

1VDD2PF03PF14NRST5VDDA6PA07PA18PA29PA310PA411PA512PA613PA714PB015PB116VSS17VDDIO218PA819PA920PA1021PA1122PA1223PA1324PA1425PA1526PB327PB428PB529PB630PB731PB832VSSA
MCU_ST_STM32F0:STM32F042K6TxFrom KiCad's library

Footprint

1234567891011121314151617181920212223242526272829303132
Package_QFP:LQFP-32_7x7mm_P0.8mmFrom KiCad's library

From the datasheet

17
Supply, least
2 V · VDD, recommended operating min · p. 47
Supply, most
3.6 V · VDD, recommended operating max · p. 47
Supply, least
1.65 V · VDDIO2, recommended operating min; VDD must be present · p. 47
Supply, least
2.4 V · VDDA, recommended operating min with ADC used; must be at least VDD · p. 47
Supply, absolute maximum
4 V · VDD, absolute max · p. 45
Works from
-40 °C · ambient min, suffix 6, maximum power dissipation · p. 47
Works up to
85 °C · ambient max, suffix 6, maximum power dissipation · p. 47
Works up to
105 °C · ambient max, suffix 6, low power dissipation subject to junction limit · p. 47
Junction, hottest
150 °C · junction absolute max · p. 46
Junction, hottest
105 °C · junction operating max, suffix 6 · p. 47
Takes working
20.62 mA · sum of VDD and VDDA typical Run currents, HSI48, 48 MHz, Flash, peripherals enabled, supplies 3.6 V · p. 50
Takes at most
24.94 mA · sum of VDD and VDDA max Run currents at 105 °C, HSI48, 48 MHz, Flash, peripherals enabled, supplies 3.6 V · p. 50
Takes asleep
2.5 µA · sum of VDD and VDDA typical Standby currents, supplies 3.6 V, LSI and IWDG off, VDDA monitoring off · p. 53
A pin gives at most
25 mA · absolute max current sunk by one I/O or control pin · p. 46
Junction to air (LQFP32 - 7 mm x 7 mm)
57 K/W · junction-to-ambient thermal resistance · p. 111
Takes working
20.86 mA · sum of VDD and VDDA typical Run current, 48 MHz, peripherals enabled, 3.3 V, Flash execution · p. 55
A pin gives at most
20 mA · GPIO source or sink rating max, relaxed VOL/VOH · p. 75

What it is and has

18
Core
ARM 32-bit Cortex-M0 · p. 1
CPU clock
Up to 48 MHz · p. 1
SRAM
6 Kbytes with HW parity · p. 1
CRC
CRC calculation unit · p. 1
DMA
5 channels · p. 1
ADC
12-bit, 1.0 µs, up to 10 channels · p. 1
Debug
Serial wire debug · p. 1
Unique ID
96-bit · p. 1
Environmental package designation
ECOPACK2 · p. 1
Core
ARM 32-bit Cortex-M0 CPU · p. 1
Maximum CPU frequency
48 MHz · p. 1
CRC calculation unit
Present · p. 1
Timers
Nine · p. 1
Watchdogs
Independent and system watchdog timers · p. 1
Package
LQFP32 7x7 mm · p. 1
Core clock
Up to 48 MHz · p. 1
Watchdog timers
Independent and system · p. 1
ADC
12-bit · p. 78

Around it

2
cap 5 pF to 20 pF
between OSC_IN and GND; CL1; high-quality ceramic for high-frequency applications; select to match the crystal or resonator, including PCB and MCU pin capacitance; place close to the oscillator pins. · p. 62
crystal 4 to 32 MHz
between OSC_IN and OSC_OUT; Optional HSE crystal or ceramic resonator; place the resonator and load capacitors as close as possible to the oscillator pins. · p. 62

Specifications

721
ParameterConditionsAs printedPage
External main supply voltage VDD–VSSmin -0.3 · max 4 V45
External I/O supply voltage VDDIO2–VSSmin -0.3 · max 4 V45
External analog supply voltage VDDA–VSSmin -0.3 · max 4 V45
Allowed voltage difference for VDD > VDDA VDD–VDDAVDD > VDDAmax 0.4 V45
External backup supply voltage VBAT–VSSmin -0.3 · max 4 V45
Input voltage on TTa pins VINMin VSS - 0.3 Vmax 4 V45
Input voltage on any other pin VINMin VSS - 0.3 Vmax 4 V45
Variations between different VDD power pins |∆VDDx|max 50 mV45
Variations between all the different ground pins |VSSx - VSS|max 50 mV45
Total current into sum of all VDD power lines (source) ΣIVDDmax 120 mA46
Total current out of sum of all VSS ground lines (sink) ΣIVSSmax -120 mA46
Maximum current into each VDD power pin (source) IVDD(PIN)max 100 mA46
Maximum current out of each VSS ground pin (sink) IVSS(PIN)max -100 mA46
Output current sunk by any I/O and control pin IIO(PIN)max 25 mA46
Output current source by any I/O and control pin IIO(PIN)max -25 mA46
Total output current sunk by sum of all I/Os and control pins ΣIIO(PIN)max 80 mA46
Total output current sourced by sum of all I/Os and control pins ΣIIO(PIN)max -80 mA46
Total output current sourced by sum of all I/Os supplied by VDDIO2 ΣIIO(PIN)max -40 mA46
Injected current on FT and FTf pins IINJ(PIN)Limit printed as -5/+0min -5 · max 0 mA46
Injected current on TC and RST pin IINJ(PIN)Limit printed as ±5min -5 · max 5 mA46
Injected current on TTa pins IINJ(PIN)Limit printed as ±5min -5 · max 5 mA46
Total injected current (sum of all I/O and control pins) ΣIINJ(PIN)Absolute sum of positive and negative injected currents; limit ±25min -25 · max 25 mA46
Storage temperature range TSTGmin -65 · max 150 °C46
Maximum junction temperature TJAbsolute maximummax 150 °C46
Internal AHB clock frequency fHCLKmin 0 · max 48 MHz47
Internal APB clock frequency fPCLKmin 0 · max 48 MHz47
Standard operating voltage VDDmin 2 · max 3.6 V47
I/O supply voltage VDDIO2Must not be supplied if VDD is not presentmin 1.65 · max 3.6 V47
Analog operating voltage (ADC not used) VDDAMinimum VDD; must have a potential equal to or higher than VDDmax 3.6 V47
Analog operating voltage (ADC used) VDDAMust have a potential equal to or higher than VDDmin 2.4 · max 3.6 V47
Backup operating voltage VBATmin 1.65 · max 3.6 V47
I/O input voltage VINTC and RST I/O; max VDDIOx+0.3 Vmin -0.3 V47
I/O input voltage VINTTa I/O; max VDDA+0.3 Vmin -0.3 V47
I/O input voltage VINFT and FTf I/O; internal pull-up disabled above VDDIOx+0.3 Vmin -0.3 · max 5.5 V47
Power dissipation at TA = 85 °C for suffix 6 or TA = 105 °C for suffix 7 PDLQFP32; suffix 6, TA = 85 °Cmax 351 mW47
Ambient temperature for the suffix 6 version TAMaximum power dissipationmin -40 · max 85 °C47
Ambient temperature for the suffix 6 version TALow power dissipation; TJ must not exceed TJmaxmin -40 · max 105 °C47
Junction temperature range TJSuffix 6 versionmin -40 · max 105 °C47
Supply current in Run mode, code executing from Flash memory IDDHSI48, 48 MHz; all peripherals enabled, USB disabled; max at TA = 25 °Ctyp 20.3 · max 23.2 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI48, 48 MHz; all peripherals enabled, USB disabled; max at TA = 85 °Cmax 23.4 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI48, 48 MHz; all peripherals enabled, USB disabled; max at TA = 105 °Cmax 24.6 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI48, 48 MHz; all peripherals disabled; max at TA = 25 °Ctyp 12.7 · max 14.4 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI48, 48 MHz; all peripherals disabled; max at TA = 85 °Cmax 14.4 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI48, 48 MHz; all peripherals disabled; max at TA = 105 °Cmax 14.7 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL on, 48 MHz; all peripherals enabled, USB disabled; max at TA = 85 °Ctyp 20.2 · max 23 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL on, 48 MHz; all peripherals disabled; max at TA = 85 °Ctyp 12.6 · max 14.3 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL on, 32 MHz; all peripherals enabled, USB disabled; max at TA = 85 °Ctyp 14 · max 16.1 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL on, 32 MHz; all peripherals disabled; max at TA = 85 °Ctyp 8.7 · max 9.7 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL on, 24 MHz; all peripherals enabled, USB disabled; max at TA = 85 °Ctyp 11 · max 13.7 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL on, 24 MHz; all peripherals disabled; max at TA = 85 °Ctyp 6.9 · max 7.8 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL off, 8 MHz; all peripherals enabled, USB disabled; max at TA = 85 °Ctyp 3.9 · max 5.3 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL off, 8 MHz; all peripherals disabled; max at TA = 85 °Ctyp 2.6 · max 3.2 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL off, 1 MHz; all peripherals enabled, USB disabled; max at TA = 85 °Ctyp 0.9 · max 1.5 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL off, 1 MHz; all peripherals disabled; max at TA = 85 °Ctyp 0.7 · max 1.1 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI clock, PLL on, 48 MHz; all peripherals enabled, USB disabled; max at TA = 85 °Ctyp 20.5 · max 23.3 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI clock, PLL on, 48 MHz; all peripherals disabled; max at TA = 85 °Ctyp 12.8 · max 14.6 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI clock, PLL on, 32 MHz; all peripherals enabled, USB disabled; max at TA = 85 °Ctyp 14.3 · max 15.9 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI clock, PLL on, 32 MHz; all peripherals disabled; max at TA = 85 °Ctyp 8.6 · max 9.7 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI clock, PLL on, 24 MHz; all peripherals enabled, USB disabled; max at TA = 85 °Ctyp 11.2 · max 13.8 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI clock, PLL on, 24 MHz; all peripherals disabled; max at TA = 85 °Ctyp 6.9 · max 7.5 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI clock, PLL off, 8 MHz; all peripherals enabled, USB disabled; max at TA = 85 °Ctyp 4.1 · max 5.3 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI clock, PLL off, 8 MHz; all peripherals disabled; max at TA = 85 °Ctyp 2.6 · max 3.1 mA50
Supply current in Run mode, code executing from RAM IDDHSI48, 48 MHz; all peripherals enabled, USB disabled; max at TA = 85 °Ctyp 19.3 · max 22.1 mA51
Supply current in Run mode, code executing from RAM IDDHSI48, 48 MHz; all peripherals disabled; max at TA = 85 °Ctyp 11.9 · max 13.6 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL on, 48 MHz; all peripherals enabled, USB disabled; max at TA = 85 °Ctyp 19.2 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL on, 48 MHz; all peripherals disabled; max at TA = 85 °Ctyp 11.7 · max 13.5 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL on, 32 MHz; all peripherals enabled, USB disabled; max at TA = 85 °Ctyp 13.4 · max 15.9 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL on, 32 MHz; all peripherals disabled; max at TA = 85 °Ctyp 7.9 · max 8.9 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL on, 24 MHz; all peripherals enabled, USB disabled; max at TA = 85 °Ctyp 10.3 · max 13 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL on, 24 MHz; all peripherals disabled; max at TA = 85 °Ctyp 6.2 · max 8.2 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL off, 8 MHz; all peripherals enabled, USB disabled; max at TA = 85 °Ctyp 3.6 · max 4.3 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL off, 8 MHz; all peripherals disabled; max at TA = 85 °Ctyp 2 · max 2.1 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL off, 1 MHz; all peripherals enabled, USB disabled; max at TA = 85 °Ctyp 0.8 · max 0.9 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL off, 1 MHz; all peripherals disabled; max at TA = 85 °Ctyp 0.4 · max 0.6 mA51
Supply current in Run mode, code executing from RAM IDDHSI clock, PLL on, 48 MHz; all peripherals enabled, USB disabled; max at TA = 85 °Ctyp 19.5 · max 22.1 mA51
Supply current in Run mode, code executing from RAM IDDHSI clock, PLL on, 48 MHz; all peripherals disabled; max at TA = 85 °Ctyp 11.8 · max 13.8 mA51
Supply current in Run mode, code executing from RAM IDDHSI clock, PLL on, 32 MHz; all peripherals enabled, USB disabled; max at TA = 85 °Ctyp 13.5 · max 16.4 mA51
Supply current in Run mode, code executing from RAM IDDHSI clock, PLL on, 32 MHz; all peripherals disabled; max at TA = 85 °Ctyp 8 · max 9.1 mA51
Supply current in Run mode, code executing from RAM IDDHSI clock, PLL on, 24 MHz; all peripherals enabled, USB disabled; max at TA = 85 °Ctyp 10.5 · max 13 mA51
Supply current in Run mode, code executing from RAM IDDHSI clock, PLL on, 24 MHz; all peripherals disabled; max at TA = 85 °Ctyp 6.5 · max 8.1 mA51
Supply current in Run mode, code executing from RAM IDDHSI clock, PLL off, 8 MHz; all peripherals enabled, USB disabled; max at TA = 85 °Ctyp 3.7 · max 5 mA51
Supply current in Run mode, code executing from RAM IDDHSI clock, PLL off, 8 MHz; all peripherals disabled; max at TA = 85 °Ctyp 2.1 · max 2.4 mA51
Supply current in Sleep mode IDDHSI48, 48 MHz; all peripherals enabled, USB disabled; max at TA = 85 °Ctyp 12.4 · max 16.3 mA51
Supply current in Sleep mode IDDHSI48, 48 MHz; all peripherals disabled; max at TA = 85 °Ctyp 3 · max 3.3 mA51
Supply current in Sleep mode IDDHSE bypass, PLL on, 48 MHz; all peripherals enabled, USB disabled; max at TA = 85 °Ctyp 12.3 · max 16 mA51
Supply current in Sleep mode IDDHSE bypass, PLL on, 48 MHz; all peripherals disabled; max at TA = 85 °Ctyp 2.9 · max 3.3 mA51
Supply current in Sleep mode IDDHSE bypass, PLL on, 32 MHz; all peripherals enabled, USB disabled; max at TA = 85 °Ctyp 8.5 · max 11.2 mA51
Supply current in Sleep mode IDDHSE bypass, PLL on, 32 MHz; all peripherals disabled; max at TA = 85 °Ctyp 1.9 · max 2.2 mA51
Supply current in Sleep mode IDDHSE bypass, PLL on, 24 MHz; all peripherals enabled, USB disabled; max at TA = 85 °Ctyp 6.5 · max 8.5 mA51
Supply current in Sleep mode IDDHSE bypass, PLL on, 24 MHz; all peripherals disabled; max at TA = 85 °Ctyp 1.6 · max 1.8 mA51
Supply current in Sleep mode IDDHSE bypass, PLL off, 8 MHz; all peripherals enabled, USB disabled; max at TA = 85 °Ctyp 2.3 · max 3.1 mA51
Supply current in Sleep mode IDDHSE bypass, PLL off, 8 MHz; all peripherals disabled; max at TA = 85 °Ctyp 0.7 · max 0.8 mA51
Supply current in Sleep mode IDDHSE bypass, PLL off, 1 MHz; all peripherals enabled, USB disabled; max at TA = 85 °Ctyp 0.4 · max 0.4 mA51
Supply current in Sleep mode IDDHSE bypass, PLL off, 1 MHz; all peripherals disabled; max at TA = 85 °Ctyp 0.1 · max 0.3 mA51
Supply current in Sleep mode IDDHSI clock, PLL on, 48 MHz; all peripherals enabled, USB disabled; max at TA = 85 °Ctyp 12.4 · max 15.7 mA51
Supply current in Sleep mode IDDHSI clock, PLL on, 48 MHz; all peripherals disabled; max at TA = 85 °Ctyp 3 · max 3.2 mA51
Supply current in Sleep mode IDDHSI clock, PLL on, 32 MHz; all peripherals enabled, USB disabled; max at TA = 85 °Ctyp 8.6 · max 11.3 mA51
Supply current in Sleep mode IDDHSI clock, PLL on, 32 MHz; all peripherals disabled; max at TA = 85 °Ctyp 2.1 · max 2.2 mA51
Supply current in Sleep mode IDDHSI clock, PLL on, 24 MHz; all peripherals enabled, USB disabled; max at TA = 85 °Ctyp 6.6 · max 8.7 mA51
Supply current in Sleep mode IDDHSI clock, PLL on, 24 MHz; all peripherals disabled; max at TA = 85 °Ctyp 1.6 · max 1.7 mA51
Supply current in Sleep mode IDDHSI clock, PLL off, 8 MHz; all peripherals enabled, USB disabled; max at TA = 85 °Ctyp 2.4 · max 3.4 mA51
Supply current in Sleep mode IDDHSI clock, PLL off, 8 MHz; all peripherals disabled; max at TA = 85 °Ctyp 0.6 · max 0.9 mA51
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI48, 48 MHz; VDDA = 2.4 V; max at TA = 85 °Ctyp 309 · max 332 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI48, 48 MHz; VDDA = 3.6 V; max at TA = 25 °Ctyp 317 · max 334 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI48, 48 MHz; VDDA = 3.6 V; max at TA = 85 °Cmax 338 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI48, 48 MHz; VDDA = 3.6 V; max at TA = 105 °Cmax 344 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL on, 48 MHz; VDDA = 2.4 V; max at TA = 85 °Ctyp 148 · max 176 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL on, 48 MHz; VDDA = 3.6 V; max at TA = 85 °Ctyp 161 · max 193 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL on, 32 MHz; VDDA = 2.4 V; max at TA = 85 °Ctyp 102 · max 124 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL on, 32 MHz; VDDA = 3.6 V; max at TA = 85 °Ctyp 111 · max 135 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL on, 24 MHz; VDDA = 2.4 V; max at TA = 85 °Ctyp 80 · max 99 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL on, 24 MHz; VDDA = 3.6 V; max at TA = 85 °Ctyp 88 · max 106 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL off, 8 MHz; VDDA = 2.4 V; max at TA = 85 °Ctyp 2.7 · max 4.2 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL off, 8 MHz; VDDA = 3.6 V; max at TA = 85 °Ctyp 3.5 · max 5.2 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL off, 1 MHz; VDDA = 2.4 V; max at TA = 85 °Ctyp 2.7 · max 4.2 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL off, 1 MHz; VDDA = 3.6 V; max at TA = 85 °Ctyp 3.6 · max 5.2 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI clock, PLL on, 48 MHz; VDDA = 2.4 V; max at TA = 85 °Ctyp 220 · max 251 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI clock, PLL on, 48 MHz; VDDA = 3.6 V; max at TA = 85 °Ctyp 242 · max 275 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI clock, PLL on, 32 MHz; VDDA = 2.4 V; max at TA = 85 °Ctyp 173 · max 200 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI clock, PLL on, 32 MHz; VDDA = 3.6 V; max at TA = 85 °Ctyp 191 · max 219 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI clock, PLL on, 24 MHz; VDDA = 2.4 V; max at TA = 85 °Ctyp 151 · max 175 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI clock, PLL on, 24 MHz; VDDA = 3.6 V; max at TA = 85 °Ctyp 167 · max 191 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI clock, PLL off, 8 MHz; VDDA = 2.4 V; max at TA = 85 °Ctyp 72 · max 85 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI clock, PLL off, 8 MHz; VDDA = 3.6 V; max at TA = 85 °Ctyp 82 · max 95 uA52
Supply current in Stop mode IDDRegulator in run mode, all oscillators OFF; VDD = VDDA = 2.0 V; typicaltyp 14.3 uA53
Supply current in Stop mode IDDRegulator in run mode, all oscillators OFF; VDD = VDDA = 2.4 V; typicaltyp 14.5 uA53
Supply current in Stop mode IDDRegulator in run mode, all oscillators OFF; VDD = VDDA = 2.7 V; typicaltyp 14.6 uA53
Supply current in Stop mode IDDRegulator in run mode, all oscillators OFF; VDD = VDDA = 3.0 V; typicaltyp 14.7 uA53
Supply current in Stop mode IDDRegulator in run mode, all oscillators OFF; VDD = VDDA = 3.3 V; typicaltyp 14.8 uA53
Supply current in Stop mode IDDRegulator in run mode, all oscillators OFF; VDD = VDDA = 3.6 V; typicaltyp 14.9 uA53
Supply current in Stop mode IDDRegulator in run mode, all oscillators OFF; TA = 25 °Cmax 21 uA53
Supply current in Stop mode IDDRegulator in run mode, all oscillators OFF; TA = 85 °Cmax 47 uA53
Supply current in Stop mode IDDRegulator in run mode, all oscillators OFF; TA = 105 °Cmax 64 uA53
Supply current in Stop mode IDDRegulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.0 Vtyp 2.9 uA53
Supply current in Stop mode IDDRegulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.4 Vtyp 3.1 uA53
Supply current in Stop mode IDDRegulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.7 Vtyp 3.2 uA53
Supply current in Stop mode IDDRegulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.0 Vtyp 3.3 uA53
Supply current in Stop mode IDDRegulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.3 Vtyp 3.4 uA53
Supply current in Stop mode IDDRegulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.6 Vtyp 3.5 uA53
Supply current in Stop mode IDDRegulator in low-power mode, all oscillators OFF; TA = 25 °Cmax 6.5 uA53
Supply current in Stop mode IDDRegulator in low-power mode, all oscillators OFF; TA = 85 °Cmax 32 uA53
Supply current in Stop mode IDDRegulator in low-power mode, all oscillators OFF; TA = 105 °Cmax 44 uA53
Supply current in Standby mode IDDLSI ON and IWDG ON; VDD = VDDA = 2.0 Vtyp 0.8 uA53
Supply current in Standby mode IDDLSI ON and IWDG ON; VDD = VDDA = 2.4 Vtyp 0.9 uA53
Supply current in Standby mode IDDLSI ON and IWDG ON; VDD = VDDA = 2.7 Vtyp 1.1 uA53
Supply current in Standby mode IDDLSI ON and IWDG ON; VDD = VDDA = 3.0 Vtyp 1.2 uA53
Supply current in Standby mode IDDLSI ON and IWDG ON; VDD = VDDA = 3.3 Vtyp 1.3 uA53
Supply current in Standby mode IDDLSI ON and IWDG ON; VDD = VDDA = 3.6 Vtyp 1.5 uA53
Supply current in Standby mode IDDLSI OFF and IWDG OFF; VDD = VDDA = 2.0 Vtyp 0.6 uA53
Supply current in Standby mode IDDLSI OFF and IWDG OFF; VDD = VDDA = 2.4 Vtyp 0.7 uA53
Supply current in Standby mode IDDLSI OFF and IWDG OFF; VDD = VDDA = 2.7 Vtyp 0.8 uA53
Supply current in Standby mode IDDLSI OFF and IWDG OFF; VDD = VDDA = 3.0 Vtyp 0.9 uA53
Supply current in Standby mode IDDLSI OFF and IWDG OFF; VDD = VDDA = 3.3 Vtyp 1 uA53
Supply current in Standby mode IDDLSI OFF and IWDG OFF; VDD = VDDA = 3.6 Vtyp 1.1 uA53
Supply current in Standby mode IDDLSI OFF and IWDG OFF; TA = 25 °Cmax 2 uA53
Supply current in Standby mode IDDLSI OFF and IWDG OFF; TA = 85 °Cmax 2.5 uA53
Supply current in Standby mode IDDLSI OFF and IWDG OFF; TA = 105 °Cmax 3 uA53
Supply current in Stop mode IDDAVDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.6 V; max at TA = 25 °Ctyp 2.7 · max 3.5 uA53
Supply current in Stop mode IDDAVDDA monitoring ON; regulator in run mode, all oscillators OFF; max at TA = 85 °Cmax 3.5 uA53
Supply current in Stop mode IDDAVDDA monitoring ON; regulator in run mode, all oscillators OFF; max at TA = 105 °Cmax 4.5 uA53
Supply current in Stop mode IDDAVDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.6 V; max at TA = 25 °Ctyp 2.7 · max 3.5 uA53
Supply current in Stop mode IDDAVDDA monitoring ON; regulator in low-power mode, all oscillators OFF; max at TA = 85 °Cmax 3.5 uA53
Supply current in Stop mode IDDAVDDA monitoring ON; regulator in low-power mode, all oscillators OFF; max at TA = 105 °Cmax 4.5 uA53
Supply current in Standby mode IDDAVDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 3.6 Vtyp 3.4 uA53
Supply current in Standby mode IDDAVDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 3.6 V; max at TA = 25 °Ctyp 2.5 · max 3.4 uA53
Supply current in Standby mode IDDAVDDA monitoring ON; LSI OFF and IWDG OFF; max at TA = 85 °Cmax 3.5 uA53
Supply current in Standby mode IDDAVDDA monitoring ON; LSI OFF and IWDG OFF; max at TA = 105 °Cmax 4.5 uA53
Supply current in Stop mode IDDAVDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.6 Vtyp 1.5 uA53
Supply current in Stop mode IDDAVDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.6 Vtyp 1.5 uA53
Supply current in Standby mode IDDAVDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 3.6 Vtyp 2.2 uA53
Supply current in Standby mode IDDAVDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 3.6 Vtyp 1.4 uA53
Electrostatic discharge voltage (human body model) VESD(HBM)TA = +25 °C, conforming to JESD22-A114; all packages; class 2max 2000 V71
Electrostatic discharge voltage (charge device model) VESD(CDM)TA = +25 °C, conforming to ANSI/ESD STM5.3.1; all packages; class C4max 500 V71
Injected current on PA12 pin IINJFunctional susceptibility: negative injection / positive injectionmin 0 · max 5 mA72
Injected current on PA9, PB3, PB13, PF11 pins with induced leakage current on adjacent pins less than 50 uA IINJLQFP32: PA9 and PB3; negative injection -5 mA; positive injection NAmin -5 mA72
Injected current on PB0, PB1 and all other FT and FTf pins IINJNegative injection -5 mA; positive injection NAmin -5 mA72
Injected current on all other TC, TTa and RST pins IINJFunctional susceptibility: negative injection / positive injectionmin -5 · max 5 mA72
Schmitt trigger hysteresis VhysTC and TTa I/Otyp 200 mV72
Schmitt trigger hysteresis VhysFT and FTf I/Otyp 100 mV72
Input leakage current IlkgTC, FT and FTf I/O; TTa in digital mode; VSS ≤ VIN ≤ VDDIOx; max ±0.1 uAmax 0.1 uA72
Input leakage current IlkgTTa in digital mode; VDDIOx ≤ VIN ≤ VDDAmax 1 uA72
Input leakage current IlkgTTa in analog mode; VSS ≤ VIN ≤ VDDA; max ±0.2 uAmax 0.2 uA72
Input leakage current IlkgFT and FTf I/O; VDDIOx ≤ VIN ≤ 5 Vmax 10 uA72
Weak pull-up equivalent resistor RPUVIN = VSSmin 25 · typ 40 · max 55 kΩ72
Output low level voltage for an I/O pin VOLCMOS port; |IIO| = 8 mA; VDDIOx ≥ 2.7 Vmax 0.4 V75
Output low level voltage for an I/O pin VOLTTL port; |IIO| = 8 mA; VDDIOx ≥ 2.7 Vmax 0.4 V75
Output high level voltage for an I/O pin VOHTTL port; |IIO| = 8 mA; VDDIOx ≥ 2.7 Vmin 2.4 V75
Output low level voltage for an I/O pin VOL|IIO| = 20 mA; VDDIOx ≥ 2.7 Vmax 1.3 V75
Output low level voltage for an I/O pin VOL|IIO| = 6 mA; VDDIOx ≥ 2 Vmax 0.4 V75
Output low level voltage for an I/O pin VOL|IIO| = 4 mAmax 0.4 V75
Output low level voltage for an FTf I/O pin in Fm+ mode VOLFm+|IIO| = 20 mA; VDDIOx ≥ 2.7 Vmax 0.4 V75
Output low level voltage for an FTf I/O pin in Fm+ mode VOLFm+|IIO| = 10 mAmax 0.4 V75
Maximum frequency fmax(IO)outOSPEEDRy[1:0] = x0; CL = 50 pF, VDDIOx ≥ 2 Vmax 2 MHz76
Output fall time tf(IO)outOSPEEDRy[1:0] = x0; CL = 50 pF, VDDIOx ≥ 2 Vmax 125 ns76
Output rise time tr(IO)outOSPEEDRy[1:0] = x0; CL = 50 pF, VDDIOx ≥ 2 Vmax 125 ns76
Maximum frequency fmax(IO)outOSPEEDRy[1:0] = x0; CL = 50 pF, VDDIOx < 2 Vmax 1 MHz76
Output fall time tf(IO)outOSPEEDRy[1:0] = x0; CL = 50 pF, VDDIOx < 2 Vmax 125 ns76
Output rise time tr(IO)outOSPEEDRy[1:0] = x0; CL = 50 pF, VDDIOx < 2 Vmax 125 ns76
Maximum frequency fmax(IO)outOSPEEDRy[1:0] = 01; CL = 50 pF, VDDIOx ≥ 2 Vmax 10 MHz76
Output fall time tf(IO)outOSPEEDRy[1:0] = 01; CL = 50 pF, VDDIOx ≥ 2 Vmax 25 ns76
Output rise time tr(IO)outOSPEEDRy[1:0] = 01; CL = 50 pF, VDDIOx ≥ 2 Vmax 25 ns76
Maximum frequency fmax(IO)outOSPEEDRy[1:0] = 01; CL = 50 pF, VDDIOx < 2 Vmax 4 MHz76
Output fall time tf(IO)outOSPEEDRy[1:0] = 01; CL = 50 pF, VDDIOx < 2 Vmax 62.5 ns76
Output rise time tr(IO)outOSPEEDRy[1:0] = 01; CL = 50 pF, VDDIOx < 2 Vmax 62.5 ns76
Maximum frequency fmax(IO)outOSPEEDRy[1:0] = 11; CL = 30 pF, VDDIOx ≥ 2.7 Vmax 50 MHz76
Maximum frequency fmax(IO)outOSPEEDRy[1:0] = 11; CL = 50 pF, VDDIOx ≥ 2.7 Vmax 30 MHz76
Maximum frequency fmax(IO)outOSPEEDRy[1:0] = 11; CL = 50 pF, 2 V ≤ VDDIOx < 2.7 Vmax 20 MHz76
Maximum frequency fmax(IO)outOSPEEDRy[1:0] = 11; CL = 50 pF, VDDIOx < 2 Vmax 10 MHz76
Output fall time tf(IO)outOSPEEDRy[1:0] = 11; CL = 30 pF, VDDIOx ≥ 2.7 Vmax 5 ns76
Output fall time tf(IO)outOSPEEDRy[1:0] = 11; CL = 50 pF, VDDIOx ≥ 2.7 Vmax 8 ns76
Output fall time tf(IO)outOSPEEDRy[1:0] = 11; CL = 50 pF, 2 V ≤ VDDIOx < 2.7 Vmax 12 ns76
Output fall time tf(IO)outOSPEEDRy[1:0] = 11; CL = 50 pF, VDDIOx < 2 Vmax 25 ns76
Output rise time tr(IO)outOSPEEDRy[1:0] = 11; CL = 30 pF, VDDIOx ≥ 2.7 Vmax 5 ns76
Output rise time tr(IO)outOSPEEDRy[1:0] = 11; CL = 50 pF, VDDIOx ≥ 2.7 Vmax 8 ns76
Output rise time tr(IO)outOSPEEDRy[1:0] = 11; CL = 50 pF, 2 V ≤ VDDIOx < 2.7 Vmax 12 ns76
Output rise time tr(IO)outOSPEEDRy[1:0] = 11; CL = 50 pF, VDDIOx < 2 Vmax 25 ns76
Thermal resistance junction-ambient ΘJALQFP32 - 7 mm x 7 mm; valuetyp 57 °C/W111
Injected current on FT and FTf pins IINJ(PIN)Negative/positive injection limitsmin -5 · max 0 mA46
Injected current on TC and RST pin IINJ(PIN)Limit ±5 mAmax 5 mA46
Injected current on TTa pins IINJ(PIN)Limit ±5 mAmax 5 mA46
Total injected current (sum of all I/O and control pins) ΣIINJ(PIN)Absolute sum of positive and negative injected currents; limit ±25 mAmax 25 mA46
Maximum junction temperature TJAbsolute maximum ratingmax 150 °C46
I/O input voltage VINTC and RST I/O; maximum VDDIOx+0.3 Vmin -0.3 V47
I/O input voltage VINTTa I/O; maximum VDDA+0.3 Vmin -0.3 V47
I/O input voltage VINFT and FTf I/O; disable internal pull-up for voltage above VDDIOx+0.3 Vmin -0.3 · max 5.5 V47
PVD threshold 6 VPVD6Rising edgemin 2.66 · typ 2.78 · max 2.9 V49
PVD threshold 6 VPVD6Falling edgemin 2.56 · typ 2.68 · max 2.8 V49
PVD threshold 7 VPVD7Rising edgemin 2.76 · typ 2.88 · max 3 V49
PVD threshold 7 VPVD7Falling edgemin 2.66 · typ 2.78 · max 2.9 V49
PVD hysteresis VPVDhystGuaranteed by design, not tested in productiontyp 100 mV49
PVD current consumption IDD(PVD)Maximum guaranteed by design, not tested in productiontyp 0.15 · max 0.26 uA49
Internal reference voltage VREFINT–40 °C < TA < +105 °Cmin 1.2 · typ 1.23 · max 1.25 V49
ADC_IN17 buffer startup time tSTARTGuaranteed by design, not tested in productionmax 10 us49
ADC sampling time when reading the internal reference voltage tS_vrefintGuaranteed by design, not tested in productionmin 4 us49
Internal reference voltage spread over the temperature range ∆VREFINTVDDA = 3 V; guaranteed by design, not tested in productionmax 10 mV49
Temperature coefficient TCoeffGuaranteed by design, not tested in productionmin -100 · max 100 ppm/°C49
Supply current in Run mode, code executing from Flash memory IDDHSI48, 48 MHz; all peripherals enabled except USB; max at TA = 25 °Ctyp 20.3 · max 23.2 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI48, 48 MHz; all peripherals enabled except USB; TA = 85 °Cmax 23.4 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI48, 48 MHz; all peripherals enabled except USB; TA = 105 °Cmax 24.6 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI48, 48 MHz; all peripherals disabled; TA = 85 °Cmax 14.4 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI48, 48 MHz; all peripherals disabled; TA = 105 °Cmax 14.7 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL on, 48 MHz; peripherals enabled except USB; max at 25 °Ctyp 20.2 · max 22.9 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL on, 48 MHz; peripherals enabled except USB; 85 °Cmax 23 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL on, 48 MHz; peripherals enabled except USB; 105 °Cmax 23.9 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL on, 48 MHz; peripherals disabled; max at 25 °Ctyp 12.6 · max 14.1 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL on, 48 MHz; peripherals disabled; 85 °Cmax 14.3 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL on, 48 MHz; peripherals disabled; 105 °Cmax 14.4 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL on, 32 MHz; peripherals enabled except USB; max at 25 °Ctyp 14 · max 16 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL on, 32 MHz; peripherals enabled except USB; 85 °Cmax 16.1 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL on, 32 MHz; peripherals enabled except USB; 105 °Cmax 16.7 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL on, 32 MHz; peripherals disabled; max at 25 °Ctyp 8.7 · max 9.5 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL on, 32 MHz; peripherals disabled; 85 °Cmax 9.7 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL on, 32 MHz; peripherals disabled; 105 °Cmax 10.3 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL on, 24 MHz; peripherals enabled except USB; max at 25 °Ctyp 11 · max 13.5 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL on, 24 MHz; peripherals enabled except USB; 85 °Cmax 13.7 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL on, 24 MHz; peripherals enabled except USB; 105 °Cmax 13.8 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL on, 24 MHz; peripherals disabled; max at 25 °Ctyp 6.9 · max 7.6 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL on, 24 MHz; peripherals disabled; 85 °Cmax 7.8 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL on, 24 MHz; peripherals disabled; 105 °Cmax 8.2 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL off, 8 MHz; peripherals enabled except USB; max at 25 °Ctyp 3.9 · max 5.2 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL off, 8 MHz; peripherals enabled except USB; 85 °Cmax 5.3 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL off, 8 MHz; peripherals enabled except USB; 105 °Cmax 5.6 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL off, 8 MHz; peripherals disabled; max at 25 °Ctyp 2.6 · max 3.1 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL off, 8 MHz; peripherals disabled; 85 °Cmax 3.2 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL off, 8 MHz; peripherals disabled; 105 °Cmax 3.3 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL off, 1 MHz; peripherals enabled except USB; max at 25 °Ctyp 0.9 · max 1.3 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL off, 1 MHz; peripherals enabled except USB; 85 °Cmax 1.5 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL off, 1 MHz; peripherals enabled except USB; 105 °Cmax 1.8 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL off, 1 MHz; peripherals disabled; max at 25 °Ctyp 0.7 · max 1 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL off, 1 MHz; peripherals disabled; 85 °Cmax 1.1 mA50
Supply current in Run mode, code executing from Flash memory IDDHSE bypass, PLL off, 1 MHz; peripherals disabled; 105 °Cmax 1.3 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI clock, PLL on, 48 MHz; peripherals enabled except USB; max at 25 °Ctyp 20.5 · max 23.1 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI clock, PLL on, 48 MHz; peripherals enabled except USB; 85 °Cmax 23.3 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI clock, PLL on, 48 MHz; peripherals enabled except USB; 105 °Cmax 23.6 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI clock, PLL on, 48 MHz; peripherals disabled; max at 25 °Ctyp 12.8 · max 14.6 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI clock, PLL on, 48 MHz; peripherals disabled; 85 °Cmax 14.6 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI clock, PLL on, 48 MHz; peripherals disabled; 105 °Cmax 15 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI clock, PLL on, 32 MHz; peripherals enabled except USB; max at 25 °Ctyp 14.3 · max 15.6 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI clock, PLL on, 32 MHz; peripherals enabled except USB; 85 °Cmax 15.9 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI clock, PLL on, 32 MHz; peripherals enabled except USB; 105 °Cmax 17 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI clock, PLL on, 32 MHz; peripherals disabled; max at 25 °Ctyp 8.6 · max 9.5 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI clock, PLL on, 32 MHz; peripherals disabled; 85 °Cmax 9.7 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI clock, PLL on, 32 MHz; peripherals disabled; 105 °Cmax 10 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI clock, PLL on, 24 MHz; peripherals enabled except USB; max at 25 °Ctyp 11.2 · max 13.6 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI clock, PLL on, 24 MHz; peripherals enabled except USB; 85 °Cmax 13.8 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI clock, PLL on, 24 MHz; peripherals enabled except USB; 105 °Cmax 14.8 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI clock, PLL on, 24 MHz; peripherals disabled; max at 25 °Ctyp 6.9 · max 7.4 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI clock, PLL on, 24 MHz; peripherals disabled; 85 °Cmax 7.5 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI clock, PLL on, 24 MHz; peripherals disabled; 105 °Cmax 7.7 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI clock, PLL off, 8 MHz; peripherals enabled except USB; max at 25 °Ctyp 4.1 · max 5.2 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI clock, PLL off, 8 MHz; peripherals enabled except USB; 85 °Cmax 5.3 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI clock, PLL off, 8 MHz; peripherals enabled except USB; 105 °Cmax 5.6 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI clock, PLL off, 8 MHz; peripherals disabled; max at 25 °Ctyp 2.6 · max 3.1 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI clock, PLL off, 8 MHz; peripherals disabled; 85 °Cmax 3.1 mA50
Supply current in Run mode, code executing from Flash memory IDDHSI clock, PLL off, 8 MHz; peripherals disabled; 105 °Cmax 3.3 mA50
Supply current in Run mode, code executing from RAM IDDHSI48, 48 MHz; peripherals enabled except USB; max at 25 °Ctyp 19.3 · max 21.9 mA51
Supply current in Run mode, code executing from RAM IDDHSI48, 48 MHz; peripherals enabled except USB; 85 °Cmax 22.1 mA51
Supply current in Run mode, code executing from RAM IDDHSI48, 48 MHz; peripherals enabled except USB; 105 °Cmax 23.7 mA51
Supply current in Run mode, code executing from RAM IDDHSI48, 48 MHz; peripherals disabled; max at 25 °Ctyp 11.9 · max 13.4 mA51
Supply current in Run mode, code executing from RAM IDDHSI48, 48 MHz; peripherals disabled; 85 °Cmax 13.6 mA51
Supply current in Run mode, code executing from RAM IDDHSI48, 48 MHz; peripherals disabled; 105 °Cmax 13.7 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL on, 48 MHz; peripherals enabled except USB; max at 25 °Ctyp 19.2 · max 21.8 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL on, 48 MHz; peripherals enabled except USB; 85 °Cmax 22 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL on, 48 MHz; peripherals enabled except USB; 105 °Cmax 22.1 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL on, 48 MHz; peripherals disabled; max at 25 °Ctyp 11.7 · max 13.3 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL on, 48 MHz; peripherals disabled; 85 °Cmax 13.5 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL on, 48 MHz; peripherals disabled; 105 °Cmax 13.7 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL on, 32 MHz; peripherals enabled except USB; max at 25 °Ctyp 13.4 · max 15.8 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL on, 32 MHz; peripherals enabled except USB; 85 °Cmax 15.9 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL on, 32 MHz; peripherals enabled except USB; 105 °Cmax 16 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL on, 32 MHz; peripherals disabled; max at 25 °Ctyp 7.9 · max 8.8 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL on, 32 MHz; peripherals disabled; 85 °Cmax 8.9 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL on, 32 MHz; peripherals disabled; 105 °Cmax 9.7 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL on, 24 MHz; peripherals enabled except USB; max at 25 °Ctyp 10.3 · max 12.6 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL on, 24 MHz; peripherals enabled except USB; 85 °Cmax 13 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL on, 24 MHz; peripherals enabled except USB; 105 °Cmax 13.4 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL on, 24 MHz; peripherals disabled; max at 25 °Ctyp 6.2 · max 8 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL on, 24 MHz; peripherals disabled; 85 °Cmax 8.2 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL on, 24 MHz; peripherals disabled; 105 °Cmax 8.3 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL off, 8 MHz; peripherals enabled except USB; max at 25 °Ctyp 3.6 · max 4.1 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL off, 8 MHz; peripherals enabled except USB; 85 °Cmax 4.3 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL off, 8 MHz; peripherals enabled except USB; 105 °Cmax 4.4 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL off, 8 MHz; peripherals disabled; max at 25 °Ctyp 2 · max 2.1 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL off, 8 MHz; peripherals disabled; 85 °Cmax 2.1 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL off, 8 MHz; peripherals disabled; 105 °Cmax 2.5 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL off, 1 MHz; peripherals enabled except USB; max at 25 °Ctyp 0.8 · max 0.9 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL off, 1 MHz; peripherals enabled except USB; 85 °Cmax 0.9 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL off, 1 MHz; peripherals enabled except USB; 105 °Cmax 1.1 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL off, 1 MHz; peripherals disabled; max at 25 °Ctyp 0.4 · max 0.5 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL off, 1 MHz; peripherals disabled; 85 °Cmax 0.6 mA51
Supply current in Run mode, code executing from RAM IDDHSE bypass, PLL off, 1 MHz; peripherals disabled; 105 °Cmax 0.8 mA51
Supply current in Run mode, code executing from RAM IDDHSI clock, PLL on, 48 MHz; peripherals enabled except USB; max at 25 °Ctyp 19.5 · max 22 mA51
Supply current in Run mode, code executing from RAM IDDHSI clock, PLL on, 48 MHz; peripherals enabled except USB; 85 °Cmax 22.1 mA51
Supply current in Run mode, code executing from RAM IDDHSI clock, PLL on, 48 MHz; peripherals enabled except USB; 105 °Cmax 22.5 mA51
Supply current in Run mode, code executing from RAM IDDHSI clock, PLL on, 48 MHz; peripherals disabled; max at 25 °Ctyp 11.8 · max 13.6 mA51
Supply current in Run mode, code executing from RAM IDDHSI clock, PLL on, 48 MHz; peripherals disabled; 85 °Cmax 13.8 mA51
Supply current in Run mode, code executing from RAM IDDHSI clock, PLL on, 48 MHz; peripherals disabled; 105 °Cmax 13.9 mA51
Supply current in Run mode, code executing from RAM IDDHSI clock, PLL on, 32 MHz; peripherals enabled except USB; max at 25 °Ctyp 13.5 · max 16.3 mA51
Supply current in Run mode, code executing from RAM IDDHSI clock, PLL on, 32 MHz; peripherals enabled except USB; 85 °Cmax 16.4 mA51
Supply current in Run mode, code executing from RAM IDDHSI clock, PLL on, 32 MHz; peripherals enabled except USB; 105 °Cmax 16.6 mA51
Supply current in Run mode, code executing from RAM IDDHSI clock, PLL on, 32 MHz; peripherals disabled; max at 25 °Ctyp 8 · max 8.8 mA51
Supply current in Run mode, code executing from RAM IDDHSI clock, PLL on, 32 MHz; peripherals disabled; 85 °Cmax 9.1 mA51
Supply current in Run mode, code executing from RAM IDDHSI clock, PLL on, 32 MHz; peripherals disabled; 105 °Cmax 9.9 mA51
Supply current in Run mode, code executing from RAM IDDHSI clock, PLL on, 24 MHz; peripherals enabled except USB; max at 25 °Ctyp 10.5 · max 12.8 mA51
Supply current in Run mode, code executing from RAM IDDHSI clock, PLL on, 24 MHz; peripherals enabled except USB; 85 °Cmax 13 mA51
Supply current in Run mode, code executing from RAM IDDHSI clock, PLL on, 24 MHz; peripherals enabled except USB; 105 °Cmax 13.8 mA51
Supply current in Run mode, code executing from RAM IDDHSI clock, PLL on, 24 MHz; peripherals disabled; max at 25 °Ctyp 6.5 · max 8 mA51
Supply current in Run mode, code executing from RAM IDDHSI clock, PLL on, 24 MHz; peripherals disabled; 85 °Cmax 8.1 mA51
Supply current in Run mode, code executing from RAM IDDHSI clock, PLL on, 24 MHz; peripherals disabled; 105 °Cmax 8.4 mA51
Supply current in Run mode, code executing from RAM IDDHSI clock, PLL off, 8 MHz; peripherals enabled except USB; max at 25 °Ctyp 3.7 · max 4.7 mA51
Supply current in Run mode, code executing from RAM IDDHSI clock, PLL off, 8 MHz; peripherals enabled except USB; 85 °Cmax 5 mA51
Supply current in Run mode, code executing from RAM IDDHSI clock, PLL off, 8 MHz; peripherals enabled except USB; 105 °Cmax 5.3 mA51
Supply current in Run mode, code executing from RAM IDDHSI clock, PLL off, 8 MHz; peripherals disabled; max at 25 °Ctyp 2.1 · max 2.3 mA51
Supply current in Run mode, code executing from RAM IDDHSI clock, PLL off, 8 MHz; peripherals disabled; 85 °Cmax 2.4 mA51
Supply current in Run mode, code executing from RAM IDDHSI clock, PLL off, 8 MHz; peripherals disabled; 105 °Cmax 3 mA51
Supply current in Sleep mode IDDHSI48, 48 MHz; peripherals enabled except USB; max at 25 °Ctyp 12.4 · max 15.1 mA51
Supply current in Sleep mode IDDHSI48, 48 MHz; peripherals enabled except USB; 85 °Cmax 16.3 mA51
Supply current in Sleep mode IDDHSI48, 48 MHz; peripherals enabled except USB; 105 °Cmax 16.7 mA51
Supply current in Sleep mode IDDHSI48, 48 MHz; peripherals disabled; max at 25 °Ctyp 3 · max 3.2 mA51
Supply current in Sleep mode IDDHSI48, 48 MHz; peripherals disabled; 85 °Cmax 3.3 mA51
Supply current in Sleep mode IDDHSI48, 48 MHz; peripherals disabled; 105 °Cmax 3.4 mA51
Supply current in Sleep mode IDDHSE bypass, PLL on, 48 MHz; peripherals enabled except USB; max at 25 °Ctyp 12.3 · max 15 mA51
Supply current in Sleep mode IDDHSE bypass, PLL on, 48 MHz; peripherals enabled except USB; 85 °Cmax 16 mA51
Supply current in Sleep mode IDDHSE bypass, PLL on, 48 MHz; peripherals enabled except USB; 105 °Cmax 16.2 mA51
Supply current in Sleep mode IDDHSE bypass, PLL on, 48 MHz; peripherals disabled; max at 25 °Ctyp 2.9 · max 3.2 mA51
Supply current in Sleep mode IDDHSE bypass, PLL on, 48 MHz; peripherals disabled; 85 °Cmax 3.3 mA51
Supply current in Sleep mode IDDHSE bypass, PLL on, 48 MHz; peripherals disabled; 105 °Cmax 3.4 mA51
Supply current in Sleep mode IDDHSE bypass, PLL on, 32 MHz; peripherals enabled except USB; max at 25 °Ctyp 8.5 · max 10.6 mA51
Supply current in Sleep mode IDDHSE bypass, PLL on, 32 MHz; peripherals enabled except USB; 85 °Cmax 11.2 mA51
Supply current in Sleep mode IDDHSE bypass, PLL on, 32 MHz; peripherals enabled except USB; 105 °Cmax 11.7 mA51
Supply current in Sleep mode IDDHSE bypass, PLL on, 32 MHz; peripherals disabled; max at 25 °Ctyp 1.9 · max 2.1 mA51
Supply current in Sleep mode IDDHSE bypass, PLL on, 32 MHz; peripherals disabled; 85 °Cmax 2.2 mA51
Supply current in Sleep mode IDDHSE bypass, PLL on, 32 MHz; peripherals disabled; 105 °Cmax 2.5 mA51
Supply current in Sleep mode IDDHSE bypass, PLL on, 24 MHz; peripherals enabled except USB; max at 25 °Ctyp 6.5 · max 8.1 mA51
Supply current in Sleep mode IDDHSE bypass, PLL on, 24 MHz; peripherals enabled except USB; 85 °Cmax 8.5 mA51
Supply current in Sleep mode IDDHSE bypass, PLL on, 24 MHz; peripherals enabled except USB; 105 °Cmax 8.7 mA51
Supply current in Sleep mode IDDHSE bypass, PLL on, 24 MHz; peripherals disabled; max at 25 °Ctyp 1.6 · max 1.8 mA51
Supply current in Sleep mode IDDHSE bypass, PLL on, 24 MHz; peripherals disabled; 85 °Cmax 1.8 mA51
Supply current in Sleep mode IDDHSE bypass, PLL on, 24 MHz; peripherals disabled; 105 °Cmax 1.9 mA51
Supply current in Sleep mode IDDHSE bypass, PLL off, 8 MHz; peripherals enabled except USB; max at 25 °Ctyp 2.3 · max 3 mA51
Supply current in Sleep mode IDDHSE bypass, PLL off, 8 MHz; peripherals enabled except USB; 85 °Cmax 3.1 mA51
Supply current in Sleep mode IDDHSE bypass, PLL off, 8 MHz; peripherals enabled except USB; 105 °Cmax 3.2 mA51
Supply current in Sleep mode IDDHSE bypass, PLL off, 8 MHz; peripherals disabled; max at 25 °Ctyp 0.7 · max 0.8 mA51
Supply current in Sleep mode IDDHSE bypass, PLL off, 8 MHz; peripherals disabled; 85 °Cmax 0.8 mA51
Supply current in Sleep mode IDDHSE bypass, PLL off, 8 MHz; peripherals disabled; 105 °Cmax 0.9 mA51
Supply current in Sleep mode IDDHSE bypass, PLL off, 1 MHz; peripherals enabled except USB; max at 25 °Ctyp 0.4 · max 0.4 mA51
Supply current in Sleep mode IDDHSE bypass, PLL off, 1 MHz; peripherals enabled except USB; 85 °Cmax 0.4 mA51
Supply current in Sleep mode IDDHSE bypass, PLL off, 1 MHz; peripherals enabled except USB; 105 °Cmax 0.6 mA51
Supply current in Sleep mode IDDHSE bypass, PLL off, 1 MHz; peripherals disabled; max at 25 °Ctyp 0.1 · max 0.3 mA51
Supply current in Sleep mode IDDHSE bypass, PLL off, 1 MHz; peripherals disabled; 85 °Cmax 0.3 mA51
Supply current in Sleep mode IDDHSE bypass, PLL off, 1 MHz; peripherals disabled; 105 °Cmax 0.4 mA51
Supply current in Sleep mode IDDHSI clock, PLL on, 48 MHz; peripherals enabled except USB; max at 25 °Ctyp 12.4 · max 15.3 mA51
Supply current in Sleep mode IDDHSI clock, PLL on, 48 MHz; peripherals enabled except USB; 85 °Cmax 15.7 mA51
Supply current in Sleep mode IDDHSI clock, PLL on, 48 MHz; peripherals enabled except USB; 105 °Cmax 15.9 mA51
Supply current in Sleep mode IDDHSI clock, PLL on, 48 MHz; peripherals disabled; max at 25 °Ctyp 3 · max 3 mA51
Supply current in Sleep mode IDDHSI clock, PLL on, 48 MHz; peripherals disabled; 85 °Cmax 3.2 mA51
Supply current in Sleep mode IDDHSI clock, PLL on, 48 MHz; peripherals disabled; 105 °Cmax 3.4 mA51
Supply current in Sleep mode IDDHSI clock, PLL on, 32 MHz; peripherals enabled except USB; max at 25 °Ctyp 8.6 · max 10.7 mA51
Supply current in Sleep mode IDDHSI clock, PLL on, 32 MHz; peripherals enabled except USB; 85 °Cmax 11.3 mA51
Supply current in Sleep mode IDDHSI clock, PLL on, 32 MHz; peripherals enabled except USB; 105 °Cmax 11.6 mA51
Supply current in Sleep mode IDDHSI clock, PLL on, 32 MHz; peripherals disabled; max at 25 °Ctyp 2.1 · max 2.2 mA51
Supply current in Sleep mode IDDHSI clock, PLL on, 32 MHz; peripherals disabled; 85 °Cmax 2.2 mA51
Supply current in Sleep mode IDDHSI clock, PLL on, 32 MHz; peripherals disabled; 105 °Cmax 2.5 mA51
Supply current in Sleep mode IDDHSI clock, PLL on, 24 MHz; peripherals enabled except USB; max at 25 °Ctyp 6.6 · max 8.4 mA51
Supply current in Sleep mode IDDHSI clock, PLL on, 24 MHz; peripherals enabled except USB; 85 °Cmax 8.7 mA51
Supply current in Sleep mode IDDHSI clock, PLL on, 24 MHz; peripherals enabled except USB; 105 °Cmax 8.9 mA51
Supply current in Sleep mode IDDHSI clock, PLL on, 24 MHz; peripherals disabled; max at 25 °Ctyp 1.6 · max 1.6 mA51
Supply current in Sleep mode IDDHSI clock, PLL on, 24 MHz; peripherals disabled; 85 °Cmax 1.7 mA51
Supply current in Sleep mode IDDHSI clock, PLL on, 24 MHz; peripherals disabled; 105 °Cmax 1.9 mA51
Supply current in Sleep mode IDDHSI clock, PLL off, 8 MHz; peripherals enabled except USB; max at 25 °Ctyp 2.4 · max 3.2 mA51
Supply current in Sleep mode IDDHSI clock, PLL off, 8 MHz; peripherals enabled except USB; 85 °Cmax 3.4 mA51
Supply current in Sleep mode IDDHSI clock, PLL off, 8 MHz; peripherals enabled except USB; 105 °Cmax 3.6 mA51
Supply current in Sleep mode IDDHSI clock, PLL off, 8 MHz; peripherals disabled; max at 25 °Ctyp 0.6 · max 0.8 mA51
Supply current in Sleep mode IDDHSI clock, PLL off, 8 MHz; peripherals disabled; 85 °Cmax 0.9 mA51
Supply current in Sleep mode IDDHSI clock, PLL off, 8 MHz; peripherals disabled; 105 °Cmax 1 mA51
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI48, 48 MHz; VDDA = 2.4 V; max at 25 °Ctyp 309 · max 325 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI48, 48 MHz; VDDA = 2.4 V; 85 °Cmax 332 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI48, 48 MHz; VDDA = 2.4 V; 105 °Cmax 342 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI48, 48 MHz; VDDA = 3.6 V; max at 25 °Ctyp 317 · max 334 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI48, 48 MHz; VDDA = 3.6 V; 85 °Cmax 338 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI48, 48 MHz; VDDA = 3.6 V; 105 °Cmax 344 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL on, 48 MHz; VDDA = 2.4 V; max at 25 °Ctyp 148 · max 167 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL on, 48 MHz; VDDA = 2.4 V; 85 °Cmax 176 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL on, 48 MHz; VDDA = 2.4 V; 105 °Cmax 179 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL on, 48 MHz; VDDA = 3.6 V; max at 25 °Ctyp 161 · max 181 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL on, 48 MHz; VDDA = 3.6 V; 85 °Cmax 193 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL on, 48 MHz; VDDA = 3.6 V; 105 °Cmax 197 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL on, 32 MHz; VDDA = 2.4 V; max at 25 °Ctyp 102 · max 119 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL on, 32 MHz; VDDA = 2.4 V; 85 °Cmax 124 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL on, 32 MHz; VDDA = 2.4 V; 105 °Cmax 126 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL on, 32 MHz; VDDA = 3.6 V; max at 25 °Ctyp 111 · max 128 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL on, 32 MHz; VDDA = 3.6 V; 85 °Cmax 135 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL on, 32 MHz; VDDA = 3.6 V; 105 °Cmax 137 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL on, 24 MHz; VDDA = 2.4 V; max at 25 °Ctyp 80 · max 95 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL on, 24 MHz; VDDA = 2.4 V; 85 °Cmax 99 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL on, 24 MHz; VDDA = 2.4 V; 105 °Cmax 100 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL on, 24 MHz; VDDA = 3.6 V; max at 25 °Ctyp 88 · max 102 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL on, 24 MHz; VDDA = 3.6 V; 85 °Cmax 106 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL on, 24 MHz; VDDA = 3.6 V; 105 °Cmax 108 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL off, 8 MHz; VDDA = 2.4 V; max at 25 °Ctyp 2.7 · max 3.7 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL off, 8 MHz; VDDA = 2.4 V; 85 °Cmax 4.2 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL off, 8 MHz; VDDA = 2.4 V; 105 °Cmax 4.5 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL off, 8 MHz; VDDA = 3.6 V; max at 25 °Ctyp 3.5 · max 4.7 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL off, 8 MHz; VDDA = 3.6 V; 85 °Cmax 5.2 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL off, 8 MHz; VDDA = 3.6 V; 105 °Cmax 5.5 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL off, 1 MHz; VDDA = 2.4 V; max at 25 °Ctyp 2.7 · max 3.7 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL off, 1 MHz; VDDA = 2.4 V; 85 °Cmax 4.2 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL off, 1 MHz; VDDA = 2.4 V; 105 °Cmax 4.2 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL off, 1 MHz; VDDA = 3.6 V; max at 25 °Ctyp 3.6 · max 4.7 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL off, 1 MHz; VDDA = 3.6 V; 85 °Cmax 5.2 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSE bypass, PLL off, 1 MHz; VDDA = 3.6 V; 105 °Cmax 5.5 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI clock, PLL on, 48 MHz; VDDA = 2.4 V; max at 25 °Ctyp 220 · max 242 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI clock, PLL on, 48 MHz; VDDA = 2.4 V; 85 °Cmax 251 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI clock, PLL on, 48 MHz; VDDA = 2.4 V; 105 °Cmax 254 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI clock, PLL on, 48 MHz; VDDA = 3.6 V; max at 25 °Ctyp 242 · max 264 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI clock, PLL on, 48 MHz; VDDA = 3.6 V; 85 °Cmax 275 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI clock, PLL on, 48 MHz; VDDA = 3.6 V; 105 °Cmax 279 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI clock, PLL on, 32 MHz; VDDA = 2.4 V; max at 25 °Ctyp 173 · max 193 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI clock, PLL on, 32 MHz; VDDA = 2.4 V; 85 °Cmax 200 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI clock, PLL on, 32 MHz; VDDA = 2.4 V; 105 °Cmax 202 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI clock, PLL on, 32 MHz; VDDA = 3.6 V; max at 25 °Ctyp 191 · max 211 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI clock, PLL on, 32 MHz; VDDA = 3.6 V; 85 °Cmax 219 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI clock, PLL on, 32 MHz; VDDA = 3.6 V; 105 °Cmax 221 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI clock, PLL on, 24 MHz; VDDA = 2.4 V; max at 25 °Ctyp 151 · max 169 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI clock, PLL on, 24 MHz; VDDA = 2.4 V; 85 °Cmax 175 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI clock, PLL on, 24 MHz; VDDA = 2.4 V; 105 °Cmax 177 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI clock, PLL on, 24 MHz; VDDA = 3.6 V; max at 25 °Ctyp 167 · max 184 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI clock, PLL on, 24 MHz; VDDA = 3.6 V; 85 °Cmax 191 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI clock, PLL on, 24 MHz; VDDA = 3.6 V; 105 °Cmax 193 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI clock, PLL off, 8 MHz; VDDA = 2.4 V; max at 25 °Ctyp 72 · max 82 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI clock, PLL off, 8 MHz; VDDA = 2.4 V; 85 °Cmax 85 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI clock, PLL off, 8 MHz; VDDA = 2.4 V; 105 °Cmax 85 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI clock, PLL off, 8 MHz; VDDA = 3.6 V; max at 25 °Ctyp 82 · max 92 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI clock, PLL off, 8 MHz; VDDA = 3.6 V; 85 °Cmax 95 uA52
Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDAHSI clock, PLL off, 8 MHz; VDDA = 3.6 V; 105 °Cmax 95 uA52
Supply current in Stop mode IDDRegulator in run mode, all oscillators OFF; VDD = VDDA = 2.0 Vtyp 14.3 uA53
Supply current in Stop mode IDDRegulator in run mode, all oscillators OFF; VDD = VDDA = 2.4 Vtyp 14.5 uA53
Supply current in Stop mode IDDRegulator in run mode, all oscillators OFF; VDD = VDDA = 2.7 Vtyp 14.6 uA53
Supply current in Stop mode IDDRegulator in run mode, all oscillators OFF; VDD = VDDA = 3.0 Vtyp 14.7 uA53
Supply current in Stop mode IDDRegulator in run mode, all oscillators OFF; VDD = VDDA = 3.3 Vtyp 14.8 uA53
Supply current in Stop mode IDDRegulator in run mode, all oscillators OFF; VDD = VDDA = 3.6 Vtyp 14.9 uA53
Supply current in Stop mode IDDAVDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.0 Vtyp 2 uA53
Supply current in Stop mode IDDAVDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.4 Vtyp 2.1 uA53
Supply current in Stop mode IDDAVDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.7 Vtyp 2.2 uA53
Supply current in Stop mode IDDAVDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.0 Vtyp 2.4 uA53
Supply current in Stop mode IDDAVDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.3 Vtyp 2.5 uA53
Supply current in Stop mode IDDAVDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.6 Vtyp 2.7 uA53
Supply current in Stop mode IDDAVDDA monitoring ON; regulator in run mode, all oscillators OFF; TA = 25 °Cmax 3.5 uA53
Supply current in Stop mode IDDAVDDA monitoring ON; regulator in run mode, all oscillators OFF; TA = 85 °Cmax 3.5 uA53
Supply current in Stop mode IDDAVDDA monitoring ON; regulator in run mode, all oscillators OFF; TA = 105 °Cmax 4.5 uA53
Supply current in Stop mode IDDAVDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.0 Vtyp 2 uA53
Supply current in Stop mode IDDAVDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.4 Vtyp 2.1 uA53
Supply current in Stop mode IDDAVDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.7 Vtyp 2.2 uA53
Supply current in Stop mode IDDAVDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.0 Vtyp 2.4 uA53
Supply current in Stop mode IDDAVDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.3 Vtyp 2.5 uA53
Supply current in Stop mode IDDAVDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.6 Vtyp 2.7 uA53
Supply current in Stop mode IDDAVDDA monitoring ON; regulator in low-power mode, all oscillators OFF; TA = 25 °Cmax 3.5 uA53
Supply current in Stop mode IDDAVDDA monitoring ON; regulator in low-power mode, all oscillators OFF; TA = 85 °Cmax 3.5 uA53
Supply current in Stop mode IDDAVDDA monitoring ON; regulator in low-power mode, all oscillators OFF; TA = 105 °Cmax 4.5 uA53
Supply current in Standby mode IDDAVDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 2.0 Vtyp 2.4 uA53
Supply current in Standby mode IDDAVDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 2.4 Vtyp 2.6 uA53
Supply current in Standby mode IDDAVDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 2.7 Vtyp 2.8 uA53
Supply current in Standby mode IDDAVDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 3.0 Vtyp 3 uA53
Supply current in Standby mode IDDAVDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 3.3 Vtyp 3.1 uA53
Supply current in Standby mode IDDAVDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 2.0 Vtyp 1.9 uA53
Supply current in Standby mode IDDAVDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 2.4 Vtyp 2 uA53
Supply current in Standby mode IDDAVDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 2.7 Vtyp 2.1 uA53
Supply current in Standby mode IDDAVDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 3.0 Vtyp 2.3 uA53
Supply current in Standby mode IDDAVDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 3.3 Vtyp 2.4 uA53
Supply current in Standby mode IDDAVDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 3.6 Vtyp 2.5 uA53
Supply current in Standby mode IDDAVDDA monitoring ON; LSI OFF and IWDG OFF; TA = 25 °Cmax 3.4 uA53
Supply current in Standby mode IDDAVDDA monitoring ON; LSI OFF and IWDG OFF; TA = 85 °Cmax 3.5 uA53
Supply current in Standby mode IDDAVDDA monitoring ON; LSI OFF and IWDG OFF; TA = 105 °Cmax 4.5 uA53
Supply current in Stop mode IDDAVDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.0 Vtyp 1.3 uA53
Supply current in Stop mode IDDAVDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.4 Vtyp 1.3 uA53
Supply current in Stop mode IDDAVDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.7 Vtyp 1.3 uA53
Supply current in Stop mode IDDAVDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.0 Vtyp 1.4 uA53
Supply current in Stop mode IDDAVDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.3 Vtyp 1.4 uA53
Supply current in Stop mode IDDAVDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.0 Vtyp 1.3 uA53
Supply current in Stop mode IDDAVDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.4 Vtyp 1.3 uA53
Supply current in Stop mode IDDAVDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.7 Vtyp 1.3 uA53
Supply current in Stop mode IDDAVDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.0 Vtyp 1.4 uA53
Supply current in Stop mode IDDAVDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.3 Vtyp 1.4 uA53
Supply current in Standby mode IDDAVDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 2.0 Vtyp 1.7 uA53
Supply current in Standby mode IDDAVDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 2.4 Vtyp 1.8 uA53
Supply current in Standby mode IDDAVDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 2.7 Vtyp 1.8 uA53
Supply current in Standby mode IDDAVDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 3.0 Vtyp 2 uA53
Supply current in Standby mode IDDAVDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 3.3 Vtyp 2.1 uA53
RTC domain supply current IDD_VBATLSE & RTC ON; Xtal mode; lower driving capability; LSEDRV[1:0] = '00'; VBAT = 1.65 Vtyp 0.5 uA54
RTC domain supply current IDD_VBATLSE & RTC ON; Xtal mode; lower driving capability; LSEDRV[1:0] = '00'; VBAT = 1.8 Vtyp 0.5 uA54
RTC domain supply current IDD_VBATLSE & RTC ON; Xtal mode; lower driving capability; LSEDRV[1:0] = '00'; VBAT = 2.4 Vtyp 0.6 uA54
RTC domain supply current IDD_VBATLSE & RTC ON; Xtal mode; lower driving capability; LSEDRV[1:0] = '00'; VBAT = 2.7 Vtyp 0.7 uA54
RTC domain supply current IDD_VBATLSE & RTC ON; Xtal mode; lower driving capability; LSEDRV[1:0] = '00'; VBAT = 3.3 Vtyp 0.9 uA54
RTC domain supply current IDD_VBATLSE & RTC ON; Xtal mode; lower driving capability; LSEDRV[1:0] = '00'; VBAT = 3.6 Vtyp 1.1 uA54
RTC domain supply current IDD_VBATLSE & RTC ON; Xtal mode; lower driving capability; LSEDRV[1:0] = '00'; TA = 25 °Cmax 1.2 uA54
RTC domain supply current IDD_VBATLSE & RTC ON; Xtal mode; lower driving capability; LSEDRV[1:0] = '00'; TA = 85 °Cmax 1.5 uA54
RTC domain supply current IDD_VBATLSE & RTC ON; Xtal mode; lower driving capability; LSEDRV[1:0] = '00'; TA = 105 °Cmax 2 uA54
RTC domain supply current IDD_VBATLSE & RTC ON; Xtal mode; higher driving capability; LSEDRV[1:0] = '11'; VBAT = 1.65 Vtyp 0.8 uA54
RTC domain supply current IDD_VBATLSE & RTC ON; Xtal mode; higher driving capability; LSEDRV[1:0] = '11'; VBAT = 1.8 Vtyp 0.9 uA54
RTC domain supply current IDD_VBATLSE & RTC ON; Xtal mode; higher driving capability; LSEDRV[1:0] = '11'; VBAT = 2.4 Vtyp 1.1 uA54
RTC domain supply current IDD_VBATLSE & RTC ON; Xtal mode; higher driving capability; LSEDRV[1:0] = '11'; VBAT = 2.7 Vtyp 1.2 uA54
RTC domain supply current IDD_VBATLSE & RTC ON; Xtal mode; higher driving capability; LSEDRV[1:0] = '11'; VBAT = 3.3 Vtyp 1.4 uA54
RTC domain supply current IDD_VBATLSE & RTC ON; Xtal mode; higher driving capability; LSEDRV[1:0] = '11'; VBAT = 3.6 Vtyp 1.5 uA54
RTC domain supply current IDD_VBATLSE & RTC ON; Xtal mode; higher driving capability; LSEDRV[1:0] = '11'; TA = 25 °Cmax 1.6 uA54
RTC domain supply current IDD_VBATLSE & RTC ON; Xtal mode; higher driving capability; LSEDRV[1:0] = '11'; TA = 85 °Cmax 2 uA54
RTC domain supply current IDD_VBATLSE & RTC ON; Xtal mode; higher driving capability; LSEDRV[1:0] = '11'; TA = 105 °Cmax 2.6 uA54
Current consumption from VDD supply IDDRun mode; peripherals enabled; fHCLK = 48 MHz; VDD = VDDA = 3.3 Vtyp 20.7 mA55
Current consumption from VDD supply IDDRun mode; peripherals disabled; fHCLK = 48 MHz; VDD = VDDA = 3.3 Vtyp 12.8 mA55
Current consumption from VDD supply IDDSleep mode; peripherals enabled; fHCLK = 48 MHz; VDD = VDDA = 3.3 Vtyp 12.3 mA55
Current consumption from VDD supply IDDSleep mode; peripherals disabled; fHCLK = 48 MHz; VDD = VDDA = 3.3 Vtyp 3.4 mA55
Current consumption from VDD supply IDDRun mode; peripherals enabled; fHCLK = 36 MHz; VDD = VDDA = 3.3 Vtyp 15.9 mA55
Current consumption from VDD supply IDDRun mode; peripherals disabled; fHCLK = 36 MHz; VDD = VDDA = 3.3 Vtyp 9.9 mA55
Current consumption from VDD supply IDDSleep mode; peripherals enabled; fHCLK = 36 MHz; VDD = VDDA = 3.3 Vtyp 9.5 mA55
Current consumption from VDD supply IDDSleep mode; peripherals disabled; fHCLK = 36 MHz; VDD = VDDA = 3.3 Vtyp 2.7 mA55
Current consumption from VDD supply IDDRun mode; peripherals enabled; fHCLK = 32 MHz; VDD = VDDA = 3.3 Vtyp 14.3 mA55
Current consumption from VDD supply IDDRun mode; peripherals disabled; fHCLK = 32 MHz; VDD = VDDA = 3.3 Vtyp 9 mA55
Current consumption from VDD supply IDDSleep mode; peripherals enabled; fHCLK = 32 MHz; VDD = VDDA = 3.3 Vtyp 8.5 mA55
Current consumption from VDD supply IDDSleep mode; peripherals disabled; fHCLK = 32 MHz; VDD = VDDA = 3.3 Vtyp 2.5 mA55
Current consumption from VDD supply IDDRun mode; peripherals enabled; fHCLK = 24 MHz; VDD = VDDA = 3.3 Vtyp 11 mA55
Current consumption from VDD supply IDDRun mode; peripherals disabled; fHCLK = 24 MHz; VDD = VDDA = 3.3 Vtyp 7.1 mA55
Current consumption from VDD supply IDDSleep mode; peripherals enabled; fHCLK = 24 MHz; VDD = VDDA = 3.3 Vtyp 6.6 mA55
Current consumption from VDD supply IDDSleep mode; peripherals disabled; fHCLK = 24 MHz; VDD = VDDA = 3.3 Vtyp 2.1 mA55
Current consumption from VDD supply IDDRun mode; peripherals enabled; fHCLK = 16 MHz; VDD = VDDA = 3.3 Vtyp 7.7 mA55
Current consumption from VDD supply IDDRun mode; peripherals disabled; fHCLK = 16 MHz; VDD = VDDA = 3.3 Vtyp 5 mA55
Current consumption from VDD supply IDDSleep mode; peripherals enabled; fHCLK = 16 MHz; VDD = VDDA = 3.3 Vtyp 4.7 mA55
Current consumption from VDD supply IDDSleep mode; peripherals disabled; fHCLK = 16 MHz; VDD = VDDA = 3.3 Vtyp 1.6 mA55
Current consumption from VDD supply IDDRun mode; peripherals enabled; fHCLK = 8 MHz; VDD = VDDA = 3.3 Vtyp 4.3 mA55
Current consumption from VDD supply IDDRun mode; peripherals disabled; fHCLK = 8 MHz; VDD = VDDA = 3.3 Vtyp 3 mA55
Current consumption from VDD supply IDDSleep mode; peripherals enabled; fHCLK = 8 MHz; VDD = VDDA = 3.3 Vtyp 2.7 mA55
Current consumption from VDD supply IDDSleep mode; peripherals disabled; fHCLK = 8 MHz; VDD = VDDA = 3.3 Vtyp 1.2 mA55
Current consumption from VDD supply IDDRun mode; peripherals enabled; fHCLK = 4 MHz; VDD = VDDA = 3.3 Vtyp 2.6 mA55
Current consumption from VDD supply IDDRun mode; peripherals disabled; fHCLK = 4 MHz; VDD = VDDA = 3.3 Vtyp 2 mA55
Current consumption from VDD supply IDDSleep mode; peripherals enabled; fHCLK = 4 MHz; VDD = VDDA = 3.3 Vtyp 1.7 mA55
Current consumption from VDD supply IDDSleep mode; peripherals disabled; fHCLK = 4 MHz; VDD = VDDA = 3.3 Vtyp 0.9 mA55
Current consumption from VDD supply IDDRun mode; peripherals enabled; fHCLK = 2 MHz; VDD = VDDA = 3.3 Vtyp 1.8 mA55
Current consumption from VDD supply IDDRun mode; peripherals disabled; fHCLK = 2 MHz; VDD = VDDA = 3.3 Vtyp 1.5 mA55
Current consumption from VDD supply IDDSleep mode; peripherals enabled; fHCLK = 2 MHz; VDD = VDDA = 3.3 Vtyp 1.2 mA55
Current consumption from VDD supply IDDSleep mode; peripherals disabled; fHCLK = 2 MHz; VDD = VDDA = 3.3 Vtyp 0.8 mA55
Current consumption from VDD supply IDDRun mode; peripherals enabled; fHCLK = 1 MHz; VDD = VDDA = 3.3 Vtyp 1.4 mA55
Current consumption from VDD supply IDDRun mode; peripherals disabled; fHCLK = 1 MHz; VDD = VDDA = 3.3 Vtyp 1.2 mA55
Current consumption from VDD supply IDDSleep mode; peripherals enabled; fHCLK = 1 MHz; VDD = VDDA = 3.3 Vtyp 1 mA55
Current consumption from VDD supply IDDSleep mode; peripherals disabled; fHCLK = 1 MHz; VDD = VDDA = 3.3 Vtyp 0.8 mA55
Current consumption from VDD supply IDDRun mode; peripherals enabled; fHCLK = 500 kHz; VDD = VDDA = 3.3 Vtyp 1.2 mA55
Current consumption from VDD supply IDDRun mode; peripherals disabled; fHCLK = 500 kHz; VDD = VDDA = 3.3 Vtyp 1.1 mA55
Current consumption from VDD supply IDDSleep mode; peripherals enabled; fHCLK = 500 kHz; VDD = VDDA = 3.3 Vtyp 0.8 mA55
Current consumption from VDD supply IDDSleep mode; peripherals disabled; fHCLK = 500 kHz; VDD = VDDA = 3.3 Vtyp 0.7 mA55
Current consumption from VDDA supply IDDARun and Sleep modes; peripherals enabled or disabled; fHCLK = 48 MHz; VDD = VDDA = 3.3 Vtyp 163.3 uA55
Current consumption from VDDA supply IDDARun and Sleep modes; peripherals enabled or disabled; fHCLK = 36 MHz; VDD = VDDA = 3.3 Vtyp 124.3 uA55
Current consumption from VDDA supply IDDARun and Sleep modes; peripherals enabled or disabled; fHCLK = 32 MHz; VDD = VDDA = 3.3 Vtyp 111.9 uA55
Current consumption from VDDA supply IDDARun and Sleep modes; peripherals enabled or disabled; fHCLK = 24 MHz; VDD = VDDA = 3.3 Vtyp 87.1 uA55
Current consumption from VDDA supply IDDARun and Sleep modes; peripherals enabled or disabled; fHCLK = 16 MHz; VDD = VDDA = 3.3 Vtyp 62.5 uA55
Current consumption from VDDA supply IDDARun and Sleep modes; peripherals enabled or disabled; fHCLK = 8 MHz; VDD = VDDA = 3.3 Vtyp 2.5 uA55
Current consumption from VDDA supply IDDARun and Sleep modes; peripherals enabled or disabled; fHCLK = 4 MHz; VDD = VDDA = 3.3 Vtyp 2.5 uA55
Current consumption from VDDA supply IDDARun and Sleep modes; peripherals enabled or disabled; fHCLK = 2 MHz; VDD = VDDA = 3.3 Vtyp 2.5 uA55
Current consumption from VDDA supply IDDARun and Sleep modes; peripherals enabled or disabled; fHCLK = 1 MHz; VDD = VDDA = 3.3 Vtyp 2.5 uA55
Current consumption from VDDA supply IDDARun and Sleep modes; peripherals enabled or disabled; fHCLK = 500 kHz; VDD = VDDA = 3.3 Vtyp 2.5 uA55
BusMatrixAHB; 25 °C; automatically active when at least one master is ONtyp 2.2 uA/MHz58
CRCAHB; 25 °Ctyp 1.9 uA/MHz58
DMAAHB; 25 °Ctyp 5.1 uA/MHz58
Flash memory interfaceAHB; 25 °Ctyp 15 uA/MHz58
GPIOAAHB; 25 °Ctyp 8.2 uA/MHz58
GPIOBAHB; 25 °Ctyp 7.7 uA/MHz58
GPIOCAHB; 25 °Ctyp 2.1 uA/MHz58
GPIOFAHB; 25 °Ctyp 1.8 uA/MHz58
SRAMAHB; 25 °Ctyp 1.1 uA/MHz58
TSCAHB; 25 °Ctyp 4.9 uA/MHz58
All AHB peripherals25 °Ctyp 49.8 uA/MHz58
APB-BridgeAPB; 25 °C; automatically active when at least one peripheral is ON on the Bustyp 2.9 uA/MHz59
ADCAPB; 25 °C; analog IDDA consumption excludedtyp 3.9 uA/MHz59
CANAPB; 25 °Ctyp 12.9 uA/MHz59
CECAPB; 25 °Ctyp 1.5 uA/MHz59
CRSAPB; 25 °Ctyp 1 uA/MHz59
DBG (MCU Debug Support)APB; 25 °Ctyp 0.2 uA/MHz59
I2C1APB; 25 °Ctyp 3.6 uA/MHz59
PWRAPB; 25 °Ctyp 1.4 uA/MHz59
SPI1APB; 25 °Ctyp 8.5 uA/MHz59
SPI2APB; 25 °Ctyp 6.1 uA/MHz59
SYSCFGAPB; 25 °Ctyp 1.8 uA/MHz59
TIM2APB; 25 °Ctyp 16.8 uA/MHz59
TIM3APB; 25 °Ctyp 11.7 uA/MHz59
TIM14APB; 25 °Ctyp 5.5 uA/MHz59
TIM16APB; 25 °Ctyp 7 uA/MHz59
TIM17APB; 25 °Ctyp 6.9 uA/MHz59
USART1APB; 25 °Ctyp 17.8 uA/MHz59
USART2APB; 25 °Ctyp 5.6 uA/MHz59
USBAPB; 25 °Ctyp 4.9 uA/MHz59
WWDGAPB; 25 °Ctyp 1.4 uA/MHz59
All APB peripherals25 °Ctyp 136.7 uA/MHz59
Wakeup from Stop mode tWUSTOPRegulator in run mode; VDD = VDDA = 2.0 V; WFEtyp 3.2 · max 5 us60
Wakeup from Stop mode tWUSTOPRegulator in run mode; VDD = VDDA = 2.4 V; WFEtyp 3.1 · max 5 us60
Wakeup from Stop mode tWUSTOPRegulator in run mode; VDD = VDDA = 2.7 V; WFEtyp 2.9 · max 5 us60
Wakeup from Stop mode tWUSTOPRegulator in run mode; VDD = VDDA = 3 V; WFEtyp 2.9 · max 5 us60
Wakeup from Stop mode tWUSTOPRegulator in run mode; VDD = VDDA = 3.3 V; WFEtyp 2.8 · max 5 us60
Wakeup from Stop mode tWUSTOPRegulator in low power mode; VDD = VDDA = 2.0 V; WFEtyp 7 · max 9 us60
Wakeup from Stop mode tWUSTOPRegulator in low power mode; VDD = VDDA = 2.4 V; WFEtyp 5.8 · max 9 us60
Wakeup from Stop mode tWUSTOPRegulator in low power mode; VDD = VDDA = 2.7 V; WFEtyp 5.2 · max 9 us60
Wakeup from Stop mode tWUSTOPRegulator in low power mode; VDD = VDDA = 3 V; WFEtyp 4.9 · max 9 us60
Wakeup from Stop mode tWUSTOPRegulator in low power mode; VDD = VDDA = 3.3 V; WFEtyp 4.6 · max 9 us60
Wakeup from Standby mode tWUSTANDBYVDD = VDDA = 2.0 V; WFEtyp 60.4 us60
Wakeup from Standby mode tWUSTANDBYVDD = VDDA = 2.4 V; WFEtyp 55.6 us60
Wakeup from Standby mode tWUSTANDBYVDD = VDDA = 2.7 V; WFEtyp 53.5 us60
Wakeup from Standby mode tWUSTANDBYVDD = VDDA = 3 V; WFEtyp 52 us60
Wakeup from Standby mode tWUSTANDBYVDD = VDDA = 3.3 V; WFEtyp 51 us60
Wakeup from Sleep mode tWUSLEEPWFEtyp 4 SYSCLK cycles60
User external clock source frequency fHSE_extHSE bypass modetyp 8 · max 32 MHz60
OSC_IN high or low time tw(HSEH), tw(HSEL)HSE bypass modemin 15 ns60
OSC_IN rise or fall time tr(HSE), tf(HSE)HSE bypass modemax 20 ns60
Oscillator frequency fOSC_IN-min 4 · typ 8 · max 32 MHz62
Feedback resistor RF-typ 200 kΩ62
HSE current consumption IDDDuring startup; first 2/3 of tSU(HSE)max 8.5 mA62
HSE current consumption IDDVDD = 3.3 V; Rm = 30 Ω; CL = 10 pF@8 MHztyp 0.4 mA62
HSE current consumption IDDVDD = 3.3 V; Rm = 45 Ω; CL = 10 pF@8 MHztyp 0.5 mA62
HSE current consumption IDDVDD = 3.3 V; Rm = 30 Ω; CL = 5 pF@32 MHztyp 0.8 mA62
HSE current consumption IDDVDD = 3.3 V; Rm = 30 Ω; CL = 10 pF@32 MHztyp 1 mA62
HSE current consumption IDDVDD = 3.3 V; Rm = 30 Ω; CL = 20 pF@32 MHztyp 1.5 mA62
Oscillator transconductance gmStartupmin 10 mA/V62
Startup time tSU(HSE)VDD is stabilizedtyp 2 ms62
LSE current consumption IDDlow drive capabilitytyp 0.5 · max 0.9 uA63
LSE current consumption IDDmedium-low drive capabilitymax 1 uA63
LSE current consumption IDDmedium-high drive capabilitymax 1.3 uA63
LSE current consumption IDDhigh drive capabilitymax 1.6 uA63
Oscillator transconductance gmlow drive capabilitymin 5 uA/V63
Oscillator transconductance gmmedium-low drive capabilitymin 8 uA/V63
Oscillator transconductance gmmedium-high drive capabilitymin 15 uA/V63
Oscillator transconductance gmhigh drive capabilitymin 25 uA/V63
Startup time tSU(LSE)VDDIOx is stabilizedtyp 2 s63
Frequency fLSIVDDA = 3.3 V; TA = –40 to 105 °Cmin 30 · typ 40 · max 50 kHz68
LSI oscillator startup time tsu(LSI)VDDA = 3.3 V; TA = –40 to 105 °Cmax 85 us68
LSI oscillator power consumption IDDA(LSI)VDDA = 3.3 V; TA = –40 to 105 °Ctyp 0.75 · max 1.2 uA68
PLL input clock fPLL_INUse appropriate multiplier factors compatible with fPLL_OUTmin 1 · typ 8 · max 24 MHz68
PLL input clock duty cycle fPLL_IN-min 40 · max 60 %68
PLL multiplier output clock fPLL_OUT-min 16 · max 48 MHz68
PLL lock time tLOCK-max 200 us68
Cycle-to-cycle jitter JitterPLL-max 300 ps68
16-bit programming time tprogTA = - 40 to +105 °Cmin 40 · typ 53.5 · max 60 us68
Page (1 KB) erase time tERASETA = - 40 to +105 °Cmin 20 · max 40 ms68
Mass erase time tMETA = - 40 to +105 °Cmin 20 · max 40 ms68
Supply current IDDWrite mode; TA = –40 to 105 °Cmax 10 mA68
Supply current IDDErase mode; TA = –40 to 105 °Cmax 12 mA68
Electrostatic discharge voltage (human body model) VESD(HBM)TA = +25 °C; conforming to JESD22-A114; all packages; class 2max 2000 V71
Electrostatic discharge voltage (charge device model) VESD(CDM)TA = +25 °C; conforming to ANSI/ESD STM5.3.1; all packages; class C4max 500 V71
Maximum frequency fmax(IO)outOSPEEDRy[1:0] = x0; CL = 50 pF; VDDIOx ≥ 2 Vmax 2 MHz76
Output fall time tf(IO)outOSPEEDRy[1:0] = x0; CL = 50 pF; VDDIOx ≥ 2 Vmax 125 ns76
Output rise time tr(IO)outOSPEEDRy[1:0] = x0; CL = 50 pF; VDDIOx ≥ 2 Vmax 125 ns76
Maximum frequency fmax(IO)outOSPEEDRy[1:0] = x0; CL = 50 pF; VDDIOx < 2 Vmax 1 MHz76
Output fall time tf(IO)outOSPEEDRy[1:0] = x0; CL = 50 pF; VDDIOx < 2 Vmax 125 ns76
Output rise time tr(IO)outOSPEEDRy[1:0] = x0; CL = 50 pF; VDDIOx < 2 Vmax 125 ns76
Maximum frequency fmax(IO)outOSPEEDRy[1:0] = 01; CL = 50 pF; VDDIOx ≥ 2 Vmax 10 MHz76
Output fall time tf(IO)outOSPEEDRy[1:0] = 01; CL = 50 pF; VDDIOx ≥ 2 Vmax 25 ns76
Output rise time tr(IO)outOSPEEDRy[1:0] = 01; CL = 50 pF; VDDIOx ≥ 2 Vmax 25 ns76
Maximum frequency fmax(IO)outOSPEEDRy[1:0] = 01; CL = 50 pF; VDDIOx < 2 Vmax 4 MHz76
Output fall time tf(IO)outOSPEEDRy[1:0] = 01; CL = 50 pF; VDDIOx < 2 Vmax 62.5 ns76
Output rise time tr(IO)outOSPEEDRy[1:0] = 01; CL = 50 pF; VDDIOx < 2 Vmax 62.5 ns76
Maximum frequency fmax(IO)outOSPEEDRy[1:0] = 11; CL = 30 pF; VDDIOx ≥ 2.7 Vmax 50 MHz76
Maximum frequency fmax(IO)outOSPEEDRy[1:0] = 11; CL = 50 pF; VDDIOx ≥ 2.7 Vmax 30 MHz76
Maximum frequency fmax(IO)outOSPEEDRy[1:0] = 11; CL = 50 pF; 2 V ≤ VDDIOx < 2.7 Vmax 20 MHz76
Maximum frequency fmax(IO)outOSPEEDRy[1:0] = 11; CL = 50 pF; VDDIOx < 2 Vmax 10 MHz76
Output fall time tf(IO)outOSPEEDRy[1:0] = 11; CL = 30 pF; VDDIOx ≥ 2.7 Vmax 5 ns76
Output fall time tf(IO)outOSPEEDRy[1:0] = 11; CL = 50 pF; VDDIOx ≥ 2.7 Vmax 8 ns76
Output fall time tf(IO)outOSPEEDRy[1:0] = 11; CL = 50 pF; 2 V ≤ VDDIOx < 2.7 Vmax 12 ns76
Output fall time tf(IO)outOSPEEDRy[1:0] = 11; CL = 50 pF; VDDIOx < 2 Vmax 25 ns76
Output rise time tr(IO)outOSPEEDRy[1:0] = 11; CL = 30 pF; VDDIOx ≥ 2.7 Vmax 5 ns76
Output rise time tr(IO)outOSPEEDRy[1:0] = 11; CL = 50 pF; VDDIOx ≥ 2.7 Vmax 8 ns76
Output rise time tr(IO)outOSPEEDRy[1:0] = 11; CL = 50 pF; 2 V ≤ VDDIOx < 2.7 Vmax 12 ns76
Output rise time tr(IO)outOSPEEDRy[1:0] = 11; CL = 50 pF; VDDIOx < 2 Vmax 25 ns76
Maximum frequency fmax(IO)outFm+ configuration; CL = 50 pF; VDDIOx ≥ 2 Vmax 2 MHz77
Output fall time tf(IO)outFm+ configuration; CL = 50 pF; VDDIOx ≥ 2 Vmax 12 ns77
Output rise time tr(IO)outFm+ configuration; CL = 50 pF; VDDIOx ≥ 2 Vmax 34 ns77
Maximum frequency fmax(IO)outFm+ configuration; CL = 50 pF; VDDIOx < 2 Vmax 0.5 MHz77
Output fall time tf(IO)outFm+ configuration; CL = 50 pF; VDDIOx < 2 Vmax 16 ns77
Output rise time tr(IO)outFm+ configuration; CL = 50 pF; VDDIOx < 2 Vmax 44 ns77
Pulse width of external signals detected by the EXTI controller tEXTIpw-min 10 ns77
NRST Schmitt trigger voltage hysteresis Vhys(NRST)-typ 200 mV78
Weak pull-up equivalent resistor RPUVIN = VSSmin 25 · typ 40 · max 55 kΩ78
NRST input filtered pulse VF(NRST)-max 100 ns78
NRST input not filtered pulse VNF(NRST)2.7 < VDD < 3.6min 300 ns78
NRST input not filtered pulse VNF(NRST)2.0 < VDD < 3.6min 500 ns78
Analog supply voltage for ADC ON VDDA-min 2.4 · max 3.6 V78
Current consumption of the ADC IDDA (ADC)VDDA = 3.3 Vtyp 0.9 mA78
ADC clock frequency fADC-min 0.6 · max 14 MHz78
Sampling rate fS12-bit resolutionmin 0.043 · max 1 MHz78

Pins, by the datasheet

30
1 VDD
Digital power supply. · p. 36
4 NRST
Device reset input and internal reset output, active low. · p. 32
5 VDDA
Analog power supply. · p. 32
6 PA0
GPIO; USART2_CTS, TIM2_CH1_ETR, TSC_G1_IO1, RTC_TAMP2, WKUP1 or ADC_IN0. · p. 32
7 PA1
GPIO; USART2_RTS, TIM2_CH2, TSC_G1_IO2, EVENTOUT or ADC_IN1. · p. 32
8 PA2
GPIO; USART2_TX, TIM2_CH3, TSC_G1_IO3, ADC_IN2 or WKUP4. · p. 32
9 PA3
GPIO; USART2_RX, TIM2_CH4, TSC_G1_IO4 or ADC_IN3. · p. 32
10 PA4
GPIO; SPI1_NSS, I2S1_WS, TIM14_CH1, TSC_G2_IO1, USART2_CK, USB_NOE or ADC_IN4. · p. 33
11 PA5
GPIO; SPI1_SCK, I2S1_CK, CEC, TIM2_CH1_ETR, TSC_G2_IO2 or ADC_IN5. · p. 33
12 PA6
GPIO; SPI1_MISO, I2S1_MCK, TIM3_CH1, TIM1_BKIN, TIM16_CH1, TSC_G2_IO3, EVENTOUT or ADC_IN6. · p. 33
13 PA7
GPIO; SPI1_MOSI, I2S1_SD, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1, TSC_G2_IO4, EVENTOUT or ADC_IN7. · p. 33
14 PB0
GPIO; TIM3_CH3, TIM1_CH2N, TSC_G3_IO2, EVENTOUT or ADC_IN8. · p. 33
15 PB1
GPIO; TIM3_CH4, TIM14_CH1, TIM1_CH3N, TSC_G3_IO3 or ADC_IN9. · p. 33
16 VSS
Ground. · p. 33
17 VDDIO2
Digital power supply for PA8 through PA15. · p. 34
18 PA8
GPIO supplied by VDDIO2; USART1_CK, TIM1_CH1, EVENTOUT, MCO or CRS_SYNC. · p. 34
19 PA9
GPIO supplied by VDDIO2; USART1_TX, TIM1_CH2, TSC_G4_IO1 or I2C1_SCL. · p. 34
20 PA10
GPIO supplied by VDDIO2; USART1_RX, TIM1_CH3, TIM17_BKIN, TSC_G4_IO2 or I2C1_SDA. · p. 34
21 PA11
GPIO supplied by VDDIO2; CAN_RX, USART1_CTS, TIM1_CH4, TSC_G4_IO3, EVENTOUT, I2C1_SCL or USB_DM. · p. 34
22 PA12
GPIO supplied by VDDIO2; CAN_TX, USART1_RTS, TIM1_ETR, TSC_G4_IO4, EVENTOUT, I2C1_SDA or USB_DP. · p. 34
23 PA13
GPIO supplied by VDDIO2; IR_OUT, SWDIO or USB_NOE; SWDIO with internal pull-up after reset. · p. 34
24 PA14
GPIO supplied by VDDIO2; USART2_TX or SWCLK; SWCLK with internal pull-down after reset. · p. 34
25 PA15
GPIO supplied by VDDIO2; SPI1_NSS, I2S1_WS, USART2_RX, TIM2_CH1_ETR, EVENTOUT or USB_NOE. · p. 35
26 PB3
GPIO; SPI1_SCK, I2S1_CK, TIM2_CH2, TSC_G5_IO1 or EVENTOUT. · p. 35
27 PB4
GPIO; SPI1_MISO, I2S1_MCK, TIM17_BKIN, TIM3_CH1, TSC_G5_IO2 or EVENTOUT. · p. 35
28 PB5
GPIO; SPI1_MOSI, I2S1_SD, I2C1_SMBA, TIM16_BKIN, TIM3_CH2 or WKUP6. · p. 35
29 PB6
GPIO; I2C1_SCL, USART1_TX, TIM16_CH1N or TSC_G5_I03. · p. 35
30 PB7
GPIO; I2C1_SDA, USART1_RX, TIM17_CH1N or TSC_G5_IO4. · p. 35
31 PB8-BOOT0
Boot memory selection; GPIO, I2C1_SCL, CEC, TIM16_CH1, TSC_SYNC or CAN_RX. · p. 35
32 VSS
Ground; VSSA die pad is connected internally to this pin. · p. 36

Open-source boards using it

19See all 19
  • 2 layers282.6 × 92 mmChavdai40, the printed circuit board in 3D

    Chavdai40

    dvorak55/chavdai40

    Challenge to Handle Acoustic-noise, Verify Drastic Abductive Implementation.

    109 parts6MIT
  • 4 layers113 × 93.7 mmCharacterizer, the printed circuit board in 3D

    Characterizer

    patrickyeon/battery-characterizer

    battery tester/characterizer hardware, firmware.

    217 parts4
  • 2 layersExample, the printed circuit board in 3D

    Example

    danderson/kidraw

    Kidraw is a library to programmatically build Kicad schematic and footprint libraries. It was created out of frustration with Kicad's inconsistent built-in libraries, and the tedium of building cookie cutter parts in…

    10 parts2Apache-2.0
  • 4 layers52 × 74 mmFRC Sensor CAN, the printed circuit board in 3D

    FRC Sensor CAN

    barkinvar/sugerCANe

    A compact interface for three NPN, PNP or logic sensors on an FRC robot. Each port has a removable 5 V / 12 V power jumper; input type is configured in software.

    144 parts1
  • 2 layers77.5 × 15 mmLin tester, the printed circuit board in 3D

    Lin tester

    Bartek0x00/USRTLIN-PCB

    PCB files and documentation for USRTLIN converter project

    37 parts1MIT
  • 2 layers67 × 45 mmUVDAR Board, the printed circuit board in 3D

    UVDAR Board

    ctu-mrs/mrs_hw_uvdar

    Hardware for UVDAR.

    63 parts1MIT
  • 2 layers52.5 × 55 mmUsb switch, the printed circuit board in 3D

    Usb switch

    danderson/ee-usb-switch

    USB-controlled load switches

    68 parts
  • 2 layers66 × 26 mmAltimetro, the printed circuit board in 3D

    Altimetro

    Daniel-Alencar/MiniEasy

    Esquemático KiCad 10 de um altímetro barométrico de recuperação dupla (apogeu + principal), equivalente em função ao Altus Metrum EasyMini: sensor barométrico, registro de voo em flash, dois canais pirotécnicos com…

    56 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the STM32F042K6T6?

Yes. The symbol is MCU_ST_STM32F0:STM32F042K6Tx and the footprint Package_QFP:LQFP-32_7x7mm_P0.8mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the STM32F042K6T6?

LQFP-32(7x7), with 32 pins. Its footprint is drawn on this page.

Where is the STM32F042K6T6 datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the STM32F042K6T6?

JLCPCB lists it as part C69216, with 172 in stock; the sellers' links on this page open their listings.

What can replace the STM32F042K6T6?

Parts like it in the library: the STM32F030K6T6 by STMicroelectronics, the STM32G030K6T6 by STMicroelectronics, the APM32F030K6T6 by Geehy and the PY32F030K18T6 by PUYA. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the STM32F042K6T6?

19 boards in 16 repositories on GitHub; the most starred are listed on this page, with their KiCad files.