Skip to the content

STM32C011F6U6

STMicroelectronicsExtended

-40℃~+85℃ 12bit 18 2V~3.6V 32 Bit 32KB 48MHz 6KB ARM Cortex-M0+ Built-in+External FLASH UFQFPN-20(3x3) Microcontrollers (MCU/MPU/SOC) ROHS

Part id
st/STM32C011F6U6
Category
Microcontrollers (MCU, MPU, SOC)
Package
UFQFPN-20(3x3)
Pins
20
In stock
0 at JLCPCB (C5456206)
Used on
8 open-source boards

Overview

The STM32C011F6U6 is a microcontroller made by STMicroelectronics in a UFQFPN-20(3x3) package with 20 pins. -40℃~+85℃ 12bit 18 2V~3.6V 32 Bit 32KB 48MHz 6KB ARM Cortex-M0+ Built-in+External FLASH UFQFPN-20(3x3) Microcontrollers (MCU/MPU/SOC) ROHS.

PCBKit's library has its KiCad symbol (MCU_ST_STM32C0:STM32C011F6Ux, from KiCad's library) and its footprint (Package_DFN_QFN:ST_UFQFPN-20_3x3mm_P0.5mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C5456206). 8 open-source boards in 4 repositories on GitHub use it.

Symbol

1PC152VDD3VSS4PF25PA06PA17PA28PA39PA410PA511PA612PA713PA814PA9/PA1115PA10/PA1216PA1317PA1418PB619PB720PC14
MCU_ST_STM32C0:STM32C011F6UxFrom KiCad's library

Footprint

Package_DFN_QFN:ST_UFQFPN-20_3x3mm_P0.5mmFrom KiCad's library

Pinout

20
The pins of the STM32C011F6U6
PinNameType
1PC15Input/output
2VDDPower in
3VSSPower in
4PF2Input/output
5PA0Input/output
6PA1Input/output
7PA2Input/output
8PA3Input/output
9PA4Input/output
10PA5Input/output
11PA6Input/output
12PA7Input/output
13PA8Input/output
14PA9/PA11Input/output
15PA10/PA12Input/output
16PA13Input/output
17PA14Input/output
18PB6Input/output
19PB7Input/output
20PC14Input/output

Open-source boards using it

8
  • 4 layers64.8 × 18 mmCorncob, the printed circuit board in 3D

    Corncob

    aswild/corncob

    Corncob is an adapter to run standard 12V PWM computer fans off of a USB power source. It boosts 5V or 9V USB-PD power to 12V and outputs a PWM control signal.

    51 parts
  • 6 layersPpg pcb v08, the printed circuit board in 3D

    Ppg pcb v08

    holison-001/MVP-PPG

    기존 PPG와 전선 6개로 연결하는 전이중 RS-422 ↔ 3.3V UART 변환 보드다. 같은 작업 폴더에 별도 KiCad 프로젝트로 작성했다. 외부 9V를 PPG와 공유하고, 사용자 지정 LD1117-3.3V로 이 보드의 통신부와 UART 포트용 3.3V를 만든다. MCU는 추가하지 않는다.

    42 parts
  • 2 layers30 × 25 mmBrushed dual esc, the printed circuit board in 3D

    Brushed dual esc

    sigmondkukla/brushed-dual-esc

    Dual drive ESC for Clarkson Combat Robotics 1lb freshman PLAnt competition. Supports two 3A brushed drive motors and includes a 5V 1A BEC output to power a receiver.

    36 parts
  • 4 layersPpg pcb v08, the printed circuit board in 3D

    Ppg pcb v08

    holison-001/MVP-PPG

    기존 PPG와 전선 6개로 연결하는 전이중 RS-422 ↔ 3.3V UART 변환 보드다. 같은 작업 폴더에 별도 KiCad 프로젝트로 작성했다. 외부 9V를 PPG와 공유하고, 사용자 지정 LD1117-3.3V로 이 보드의 통신부와 UART 포트용 3.3V를 만든다. MCU는 추가하지 않는다.

    35 parts
  • 4 layersPpg pcb v08, the printed circuit board in 3D

    Ppg pcb v08

    holison-001/MVP-PPG

    기존 PPG와 전선 6개로 연결하는 전이중 RS-422 ↔ 3.3V UART 변환 보드다. 같은 작업 폴더에 별도 KiCad 프로젝트로 작성했다. 외부 9V를 PPG와 공유하고, 사용자 지정 LD1117-3.3V로 이 보드의 통신부와 UART 포트용 3.3V를 만든다. MCU는 추가하지 않는다.

    37 parts
  • 6 layersPpg pcb v08 via split, the printed circuit board in 3D

    Ppg pcb v08 via split

    holison-001/MVP-PPG

    기존 PPG와 전선 6개로 연결하는 전이중 RS-422 ↔ 3.3V UART 변환 보드다. 같은 작업 폴더에 별도 KiCad 프로젝트로 작성했다. 외부 9V를 PPG와 공유하고, 사용자 지정 LD1117-3.3V로 이 보드의 통신부와 UART 포트용 3.3V를 만든다. MCU는 추가하지 않는다.

    39 parts
  • 4 layersPpg rs422 review, the printed circuit board in 3D

    Ppg rs422 review

    holison-001/MVP-PPG

    기존 PPG와 전선 6개로 연결하는 전이중 RS-422 ↔ 3.3V UART 변환 보드다. 같은 작업 폴더에 별도 KiCad 프로젝트로 작성했다. 외부 9V를 PPG와 공유하고, 사용자 지정 LD1117-3.3V로 이 보드의 통신부와 UART 포트용 3.3V를 만든다. MCU는 추가하지 않는다.

    37 parts

Parts like it

3

Questions

Is there a KiCad symbol and footprint for the STM32C011F6U6?

Yes. The symbol is MCU_ST_STM32C0:STM32C011F6Ux and the footprint Package_DFN_QFN:ST_UFQFPN-20_3x3mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the STM32C011F6U6?

UFQFPN-20(3x3), with 20 pins. Its footprint is drawn on this page.

Where is the STM32C011F6U6 datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the STM32C011F6U6?

JLCPCB lists it as part C5456206, with 0 in stock; the sellers' links on this page open their listings.

What can replace the STM32C011F6U6?

Parts like it in the library: the STM32C011F4U7 by STMicroelectronics, the STM32C011F4U6 by STMicroelectronics and the STM32C011F6U7 by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the STM32C011F6U6?

8 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.