Skip to the content

STLQ020J30R

STMicroelectronicsExtended

-40℃~+125℃@(Tj) 1 150uA 160mV@(200mA) 200mA 3V 5.5V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Output discharge Positive UFBGA-4 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
st/STLQ020J30R
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
UFBGA-4
Pins
4
In stock
16 at JLCPCB (C2970749)

Overview

The STLQ020J30R is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by STMicroelectronics in a UFBGA-4 package with 4 pins. -40℃~+125℃@(Tj) 1 150uA 160mV@(200mA) 200mA 3V 5.5V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Output discharge Positive UFBGA-4 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_A1IN_A2OUT_B1EN_B2GND, from PCBKit's generic symbols) and its footprint (EasyEDA_Cloud:WLCSP-4_L0.7-W0.7-P0.40-TL, from EasyEDA), ready for a KiCad board. 16 are in stock at JLCPCB (part C2970749).

Symbol

A1INB1ENA2OUTB2GND
Pinmap_Generic:Regulator_Linear_A1IN_A2OUT_B1EN_B2GNDFrom PCBKit's generic symbols

Footprint

EasyEDA_Cloud:WLCSP-4_L0.7-W0.7-P0.40-TLFrom EasyEDA

Pinout

4
The pins of the STLQ020J30R
PinNameType
A1INPower in
A2OUTPower out
B1ENInput
B2GNDPower in

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the STLQ020J30R?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_A1IN_A2OUT_B1EN_B2GND and the footprint EasyEDA_Cloud:WLCSP-4_L0.7-W0.7-P0.40-TL, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the STLQ020J30R?

UFBGA-4, with 4 pins. Its footprint is drawn on this page.

Where is the STLQ020J30R datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the STLQ020J30R?

JLCPCB lists it as part C2970749, with 16 in stock; the sellers' links on this page open their listings.

What can replace the STLQ020J30R?

Parts like it in the library: the XC6206P302MR by HXY MOSFET, the XC6206P302MR by UMW, the LP5907MFX-3.0 by Texas Instruments and the LN6206P302MR-G by NATLINEAR. Check their datasheets: a part that fits the footprint may still differ in its ratings.