Skip to the content

LSM6DSV16BXTR

STMicroelectronicsExtended

-40℃~+85℃ 1.71V~3.6V 4.5KB IMU (accelerometer + gyroscope) SPI、I2C X,Y,Z X,Y,Z ±16g ±4000dps LGA-14(2.5x3) Accelerometers ROHS

Part id
st/LSM6DSV16BXTR
Category
Accelerometers
Package
LGA-14(2.5x3)
Pins
14
In stock
122 at JLCPCB (C5267394)
Used on
5 open-source boards

Overview

The LSM6DSV16BXTR is an accelerometer made by STMicroelectronics in a LGA-14(2.5x3) package with 14 pins. -40℃~+85℃ 1.71V~3.6V 4.5KB IMU (accelerometer + gyroscope) SPI、I2C X,Y,Z X,Y,Z ±16g ±4000dps LGA-14(2.5x3) Accelerometers ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LSM6DSV16BXTR, from EasyEDA) and its footprint (EasyEDA_Cloud:LGA-14_L3.0-W2.5-P0.50-BR, from EasyEDA), ready for a KiCad board. 122 are in stock at JLCPCB (part C5267394). 5 open-source boards in 4 repositories on GitHub use it.

Symbol

1SDO/SA02TDMout3BCLK4INT15Vdd_IO6AH1/QVAR17GND8Vdd9AH2/QVAR210INT211WCLK12CS13SCL14SDA
EasyEDA_Cloud:LSM6DSV16BXTRFrom EasyEDA

Footprint

EasyEDA_Cloud:LGA-14_L3.0-W2.5-P0.50-BRFrom EasyEDA

From the datasheet

9
Supply, least
1.71 V · Vdd, recommended operating min · p. 14
Supply, most
3.6 V · Vdd, recommended operating max · p. 14
Supply, least
1.08 V · Vdd_IO, recommended operating min · p. 14
Supply, absolute maximum
4.8 V · Vdd, absolute max · p. 20
Works from
-40 °C · Operating temperature min · p. 14
Works up to
85 °C · Operating temperature max · p. 14
Takes working
600 µA · Gyroscope and accelerometer, UI only high-performance mode, typical · p. 14
Takes asleep
2.6 µA · Gyroscope and accelerometer power-down, typical · p. 14
A pin gives at most
4 mA · Digital pin source or sink driving capability max · p. 14

What it is and has

16
Sensor
6-axis IMU with sensor fusion, AI, Qvar, and hearable features · p. 1
Processing channels
Three: motion tracking, bone conduction, Qvar sensing · p. 1
FIFO
Up to 4.5 KB · p. 1
Accelerometer full scale
±2/±4/±8/±16 g · p. 1
Gyroscope full scale
±125/±250/±500/±1000/±2000/±4000 dps · p. 1
TDM
Slave interface · p. 1
Pedometer
Advanced pedometer, step detector, step counter · p. 1
Motion detection
Significant motion and tilt detection · p. 1
Interrupts
Free-fall, wakeup, 6D orientation, click, double-click · p. 1
Machine learning core
Exportable features and filters for AI applications · p. 1
Adaptive self-configuration
Embedded ASC · p. 1
Qvar
Electric charge variation detection · p. 1
Analog hub
ADC and analog input data processing · p. 1
Sensor fusion
Embedded low-power algorithm · p. 1
Temperature sensor
Embedded · p. 1
Compliance
ECOPACK and RoHS · p. 1

Around it

1
cap 100 nF
between Vdd_IO and GND; Recommended filter capacitor; Vdd_IO is marked with footnote 1. · p. 11

Specifications

22
ParameterConditionsAs printedPage
Supply voltage VddVdd = 1.8 V, T = 25 °C, unless otherwise notedmin 1.71 · typ 1.8 · max 3.6 V14
Power supply for I/O Vdd_IOT = 25 °Cmin 1.08 · max 3.6 V14
Gyroscope and accelerometer current consumption in high-performance mode (UI only) IddHPVdd = 1.8 V, T = 25 °Ctyp 0.6 mA14
Gyroscope and accelerometer current consumption in high-performance mode (UI + TDM) IddHPTVdd = 1.8 V, T = 25 °Ctyp 0.95 mA14
Accelerometer current consumption in high-performance mode (UI only) LA_IddHPVdd = 1.8 V, T = 25 °Ctyp 190 uA14
Accelerometer current consumption in high-performance mode & TDM LA_IddHPTVdd = 1.8 V, T = 25 °Ctyp 0.6 mA14
Accelerometer current consumption in low-power mode (LPM2) LA_IddLPM2Vdd = 1.8 V, T = 25 °C, ODR = 60 Hztyp 20 uA14
Accelerometer current consumption in low-power mode (LPM1) LA_IddLPM1Vdd = 1.8 V, T = 25 °C, ODR = 60 Hztyp 17 uA14
Gyroscope and accelerometer current consumption during power-down IddPDVdd = 1.8 V, T = 25 °Ctyp 2.6 uA14
Turn-on time - gyroscope TonVdd = 1.8 V, T = 25 °Ctyp 30 ms14
Low-level output voltage VOLIOL = 4 mA; Vdd = 1.8 V, T = 25 °Cmax 0.2 V14
Operating temperature range Topmin -40 · max 85 °C14
Power consumptionVdd_IO = 1.8 V, Zin = 235 MOhm; extra consumption when only analog hub / Qvar is enabled; accelerometer must be in high-performance modetyp 15 uA14
Offset (shorted inputs)Vdd_IO = 1.8 V, Zin = 235 MOhmtyp 3 mV14
Noise (shorted inputs)Vdd_IO = 1.8 V, Zin = 235 MOhmtyp 54 uV14
Qvar gainVdd_IO = 1.8 V, Zin = 235 MOhmtyp 78 LSB/mV14
CMRRVdd_IO = 1.8 V, Zin = 235 MOhmtyp 54 dB14
Supply voltage Vddmin -0.3 · max 4.8 V20
Storage temperature range TSTGmin -40 · max 125 °C20
Acceleration g for 0.2 ms Sg0.2 msmax 20000 g20
Electrostatic discharge protection (HBM) ESDHBMmax 2 kV20
Input voltage on any control pin VinIncluding SDO/SA0, BCLK, WCLK, CS, SCL,SDA; upper limit Vdd_IO +0.3 Vmin -0.3 V20

Pins, by the datasheet

14
1 SDO/SA0
SPI 4-wire serial data output; I²C device address least significant bit. · p. 11
2 TDMout
Mode 1: connect to GND or Vdd_IO. Mode 2: TDM output. · p. 11
3 BCLK
Mode 1: connect to GND or Vdd_IO. Mode 2: TDM bit clock. · p. 11
4 INT1
Programmable interrupt in I²C and SPI. · p. 11
5 Vdd_IO
Power supply for I/O pins; recommended 100 nF filter capacitor. · p. 11
6 AH1/QVAR1
Analog hub input 1 or Qvar electrode 1; connect to Vdd or GND when both functions are disabled. · p. 11
7 GND
0 V supply. · p. 11
8 Vdd
Power supply; recommended 100 nF filter capacitor. · p. 11
9 AH2/QVAR2
Analog hub input 2 or Qvar electrode 2; connect to Vdd or GND when both functions are disabled. · p. 11
10 INT2
Programmable interrupt 2 in I²C and SPI. · p. 11
11 WCLK
Mode 1: connect to Vdd_IO or leave unconnected. Mode 2: TDM word clock. · p. 11
12 CS
Interface mode selection: high enables I²C/MIPI I3C and SPI idle mode; low enables SPI communication and disables I²C/MIPI I3C. · p. 11
13 SCL
I²C/MIPI I3C serial clock or SPI serial port clock. · p. 11
14 SDA
I²C/MIPI I3C serial data, SPI serial data input, or 3-wire serial data output. · p. 11

Ordering codes, by the datasheet

2
LSM6DSV16BX
LGA-14L (2.5 x 3.0 x 0.71 mm) · Tray packing; -40 to +85 °C · p. 1
LSM6DSV16BXTR
LGA-14L (2.5 x 3.0 x 0.71 mm) · Tape and reel packing; -40 to +85 °C · p. 1

Open-source boards using it

5
  • 4 layers37 × 34.3 mmReadout 60pin, the printed circuit board in 3D

    Readout 60pin

    opentac/opentac

    OpenTac: open tools to design, fabricate, read and simulate flex-PCB tactile skins that sense normal and shear force, for any robot surface.

    55 parts92MIT
  • 4 layers30 × 30 mmWearable imu, the printed circuit board in 3D

    Wearable imu

    davispe1/wearable-imu

    Node PCB — revision 1.0. 4-layer board (F.Cu, In1.Cu, In2.Cu, B.Cu).

    72 partsMIT
  • 4 layers20.6 × 74 mmSuspension accel, the printed circuit board in 3D

    Suspension accel

    meyerAurelius/telemetry-pcb

    First iteration of the telemetry PCB for UCalgary BAJA

    47 parts
  • 4 layers16 × 22.8 mmReadout 30pin top, the printed circuit board in 3D

    Readout 30pin top

    opentac/opentac

    OpenTac: open tools to design, fabricate, read and simulate flex-PCB tactile skins that sense normal and shear force, for any robot surface.

    25 parts92MIT
  • 4 layers40 × 35 mmBIMU V 1 1, the printed circuit board in 3D

    BIMU V 1 1

    robotique-udes/Exo_Electric

    This repo contains all the information about the PCB and electrical schematics of Biogenius.

    56 parts1GPL-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LSM6DSV16BXTR?

Yes. The symbol is EasyEDA_Cloud:LSM6DSV16BXTR and the footprint EasyEDA_Cloud:LGA-14_L3.0-W2.5-P0.50-BR, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LSM6DSV16BXTR?

LGA-14(2.5x3), with 14 pins. Its footprint is drawn on this page.

Where is the LSM6DSV16BXTR datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the LSM6DSV16BXTR?

JLCPCB lists it as part C5267394, with 122 in stock; the sellers' links on this page open their listings.

What can replace the LSM6DSV16BXTR?

Parts like it in the library: the ICM-42607-C by TDK InvenSense, the LSM6DSR by STMicroelectronics, the ISM330DLC by STMicroelectronics and the LSM6DSV16B by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LSM6DSV16BXTR?

5 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.