Skip to the content
12345

LDK120M33R

STMicroelectronicsExtended

-40℃~+125℃@(Tj) 1 200mA 3.3V 300mV@(200mA) 5.5V 51uVrms 55dB@(10kHz) 60uA Fixed Over Temperature Protection、Enable、Short Circuit Protection Positive SOT-23-5L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
st/LDK120M33R
Category
Voltage Regulators Linear, Low Drop Out (LDO) Regulators
Package
SOT-23-5L
Pins
5
In stock
805 at JLCPCB (C2688675)
Used on
2 open-source boards

Overview

The LDK120M33R is a voltage Regulators Linear, Low Drop Out (LDO) Regulator made by STMicroelectronics in a SOT-23-5L package with 5 pins. -40℃~+125℃@(Tj) 1 200mA 3.3V 300mV@(200mA) 5.5V 51uVrms 55dB@(10kHz) 60uA Fixed Over Temperature Protection、Enable、Short Circuit Protection Positive SOT-23-5L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LDK120M-R, from EasyEDA) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 805 are in stock at JLCPCB (part C2688675). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

OUT5BYP/ADJ/NC4EN3GND2IN1
EasyEDA_Cloud:LDK120M-RFrom EasyEDA

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

Pinout

5
The pins of the LDK120M33R
PinNameType
1INUnspecified
2GNDUnspecified
3ENUnspecified
4BYP/ADJ/NCUnspecified
5OUTUnspecified

Open-source boards using it

2
  • 2 layers34 × 57.2 mmCo2 Sensor, the printed circuit board in 3D

    Co2 Sensor

    MaxLell/HALCO2

    A CO2 Sensor that looks like HAL9000

    47 partsMIT
  • 4 layersPomodoro V1, the printed circuit board in 3D

    Pomodoro V1

    MaxLell/Pomodoro_Clock

    So this is basically what this device (will) is about. It will sit on my desk and ping me, when I need to take a break, and not only ping me, but rather shine a bright light at me, so that I actually get my lazy a up…

    155 partsMIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LDK120M33R?

Yes. The symbol is EasyEDA_Cloud:LDK120M-R and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LDK120M33R?

SOT-23-5L, with 5 pins. Its footprint is drawn on this page.

Where is the LDK120M33R datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the LDK120M33R?

JLCPCB lists it as part C2688675, with 805 in stock; the sellers' links on this page open their listings.

What can replace the LDK120M33R?

Parts like it in the library: the ME6211C33M5G-N by MICRONE, the SPX3819M5-L-3-3/TR by MaxLinear, the RT9013-33GB by RICHTEK and the XC6219B332MR by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LDK120M33R?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.