Skip to the content
123

LD1117V33C

STMicroelectronicsExtended

-40℃~+125℃ 1 1.3V@(800mA) 100uV 15V 3.3V 75dB@(120Hz) 800mA Fixed Over Current Protection、Over Temperature Protection Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
st/LD1117V33C
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TO-220
Pins
3
In stock
1,769 at JLCPCB (C672117)
Used on
7 open-source boards

Overview

The LD1117V33C is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by STMicroelectronics in a TO-220 package with 3 pins. -40℃~+125℃ 1 1.3V@(800mA) 100uV 15V 3.3V 75dB@(120Hz) 800mA Fixed Over Current Protection、Over Temperature Protection Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:LD1117V33, from KiCad's library) and its footprint (Package_TO_SOT_THT:TO-220-3_Vertical, from KiCad's library), ready for a KiCad board. 1,769 are in stock at JLCPCB (part C672117). 7 open-source boards in 7 repositories on GitHub use it.

Symbol

GND1VO2VI3
Regulator_Linear:LD1117V33From KiCad's library

Footprint

123
Package_TO_SOT_THT:TO-220-3_VerticalFrom KiCad's library

Pinout

3
The pins of the LD1117V33C
PinNameType
1GNDPower in
2VOPower out
3VIPower in

Open-source boards using it

7
  • 2 layers50 × 80 mmAI4R SENSORPCB, the printed circuit board in 3D

    AI4R SENSORPCB

    pranavpai/Autonomous-RC-Car-AI-Project

    Autonomous RC car with cone-based lane keeping, ToF obstacle avoidance, and software-in-the-loop simulation using ROS2

    25 parts2MIT
  • 2 layers102 × 55 mmOpen KIoT, the printed circuit board in 3D

    Open KIoT

    voluta-coop/Open-KIoT

    Voluta.coop ha desarrollado esta PCB para solucionar problemas socioambientales, poniendo la tecnología al servicio de las personas y el medio ambiente.

    55 parts
  • 2 layers120.1 × 99.3 mmSingle WAS IMU POE, the printed circuit board in 3D

    Single WAS IMU POE

    farmerbriantee/Ace

    Modular Development of AOG

    41 parts7MIT
  • 4 layers190 × 160 mmPSU, the printed circuit board in 3D

    PSU

    skylar-slideshows/Digilog_Capstone

    92 parts3
  • 2 layers47.5 × 62.9 mmXBeeBreakoutBoard, the printed circuit board in 3D

    XBeeBreakoutBoard

    MSTRocketDesignTeam/Liquid-Engine-Controller

    Evolution of the RDT's Custom Liquid Engine Control Unit!

    13 parts2AGPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LD1117V33C?

Yes. The symbol is Regulator_Linear:LD1117V33 and the footprint Package_TO_SOT_THT:TO-220-3_Vertical, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LD1117V33C?

TO-220, with 3 pins. Its footprint is drawn on this page.

Where is the LD1117V33C datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the LD1117V33C?

JLCPCB lists it as part C672117, with 1,769 in stock; the sellers' links on this page open their listings.

What can replace the LD1117V33C?

Parts like it in the library: the LD1117V33 by STMicroelectronics, the AMS1117T-3.3G by HANSCHIP semiconductor, the LM1086IT-3.3G by HANSCHIP semiconductor and the LM1084T-3.3 by HGSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LD1117V33C?

7 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.