
GR Subscriber Line Interface Module
GadgetReboot/Phone_SLIM
POTS Telephone Subscriber Line Interface Module
STMicroelectronicsExtended
0℃~+125℃@(Tj) 1 1.2A 1.3V@(1A) 100uV 10V 3.3V 5mA 75dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS
The LD1117AV33 is a voltage Regulators Linear, Low Drop Out (LDO) Regulator made by STMicroelectronics in a TO-220 package with 3 pins. 0℃~+125℃@(Tj) 1 1.2A 1.3V@(1A) 100uV 10V 3.3V 5mA 75dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.
PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1GND_2OUT_3IN, from PCBKit's generic symbols) and its footprint (EasyEDA_Cloud:TO-220-3_L10.0-W4.5-P2.54-L-1, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C32833). 10 open-source boards in 7 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | GND | Power in |
| 2 | OUT | Power out |
| 3 | IN | Power in |

GadgetReboot/Phone_SLIM
POTS Telephone Subscriber Line Interface Module

crgarcia12/electronics-homeassistant-lightscontroll
A smart lighting controller PCB that integrates seamlessly with ESPHome and Home Assistant while maintaining full compatibility with traditional mechanical switches.


richardhoman99/Single-Board-Computer
CPGR4253 Microcomputer Design is not as much a technical course at LeTourneau University as it is a design project.

wyolum/ESP8266_01_Breakout
KiCad fork of https://github.com/sfgit/ESP8266-01-BREAKOUT

crgarcia12/electronics-homeassistant-lightscontroll
A smart lighting controller PCB that integrates seamlessly with ESPHome and Home Assistant while maintaining full compatibility with traditional mechanical switches.

crgarcia12/electronics-homeassistant-lightscontroll
A smart lighting controller PCB that integrates seamlessly with ESPHome and Home Assistant while maintaining full compatibility with traditional mechanical switches.

crgarcia12/electronics-homeassistant-lightscontroll
A smart lighting controller PCB that integrates seamlessly with ESPHome and Home Assistant while maintaining full compatibility with traditional mechanical switches.
Yes. The symbol is Pinmap_Generic:Regulator_Linear_1GND_2OUT_3IN and the footprint EasyEDA_Cloud:TO-220-3_L10.0-W4.5-P2.54-L-1, both drawn on this page. PCBKit places them on a board for you when you design with it.
TO-220, with 3 pins. Its footprint is drawn on this page.
STMicroelectronics publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C32833, with 0 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the LM1085T-3.3 by HGSEMI, the LM1086T-3.3 by HGSEMI, the LM1086CT-3.3 by Texas Instruments and the LMS1587CT-3.3/NOPB by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
10 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.