L297/1
STMicroelectronicsExtended
1、2 4.75V~7V Bipolar Driver STEP/DIR DIP-20 Stepper Motor Driver ROHS
- Part id
- st/L297/1
- Category
- Stepper Motor Driver
- Package
- DIP-20
- Pins
- 20
- In stock
- 48 at JLCPCB (C34301)
Overview
The L297/1 is a stepper Motor Driver made by STMicroelectronics in a DIP-20 package with 20 pins. 1、2 4.75V~7V Bipolar Driver STEP/DIR DIP-20 Stepper Motor Driver ROHS.
PCBKit's library has its KiCad symbol (Analog & Interface:L297, from CERN's library) and its footprint (Package_DIP:DIP-20_W7.62mm, from KiCad's library), ready for a KiCad board. 48 are in stock at JLCPCB (part C34301).
Symbol
Footprint
Pinout
20| Pin | Name | Type |
|---|---|---|
| 1 | SYNC | Input |
| 2 | GND | Power in |
| 3 | HOME | Open collector |
| 4 | A | Output |
| 5 | INH1 | Input |
| 6 | B | Output |
| 7 | C | Output |
| 8 | INH2 | Input |
| 9 | D | Output |
| 10 | EN | Input |
| 11 | CTRL | Input |
| 12 | VS | Power in |
| 13 | SENS2 | Input |
| 14 | SENS1 | Input |
| 15 | VREF | Input |
| 16 | OSC | Input |
| 17 | CW/CCW | Input |
| 18 | CLOCK | Input |
| 19 | H/F | Input |
| 20 | RESET | Input |
Parts like it
5L297N
DIP-20-40℃~+150℃ 1、2 4.75V~7V Bipolar Driver Power-on reset DIP-20 Stepper Motor Driver ROHSHGSEMIStepper Motor DriverL6225N
PDIP-20-25℃~+125℃ 1.4A 2 730mΩ 8V~52V Bipolar Driver Overcurrent Protection、Short-Circuit Protection、Over temperature protection、Under-voltage lockout、Motor step-out prevention function、Built-in charge pump、Dead-time / shoot-through protection Yes PDIP-20 Stepper Motor Driver ROHSSTMicroelectronicsStepper Motor DriverXD297
DIP-20-40℃~+85℃ 1、2 4.75V~7V Bipolar Driver DIP-20 Stepper Motor Driver ROHSXINLUDAStepper Motor DriverL6205N
PDIP-20-25℃~+125℃ 2 2.8A 300mΩ 8V~52V Bipolar Driver Overcurrent Protection、Short-Circuit Protection、Over temperature protection、Under-voltage lockout、Built-in charge pump、Dead-time / shoot-through protection Yes PDIP-20 Stepper Motor Driver ROHSSTMicroelectronicsStepper Motor DriverLS8297CT
DIP-202 2 4.75V~7V Bipolar Driver STEP/DIR DIP-20 Stepper Motor Driver ROHSLSI/CSIStepper Motor Driver
Questions
Is there a KiCad symbol and footprint for the L297/1?
Yes. The symbol is Analog & Interface:L297 and the footprint Package_DIP:DIP-20_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the L297/1?
DIP-20, with 20 pins. Its footprint is drawn on this page.
Where is the L297/1 datasheet?
STMicroelectronics publishes it: the Datasheet link on this page opens it.
Where can I order the L297/1?
JLCPCB lists it as part C34301, with 48 in stock; the sellers' links on this page open their listings.
What can replace the L297/1?
Parts like it in the library: the L297N by HGSEMI, the L6225N by STMicroelectronics, the XD297 by XINLUDA and the L6205N by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.