LS8297CT
LSI/CSIExtended
2 2 4.75V~7V Bipolar Driver STEP/DIR DIP-20 Stepper Motor Driver ROHS
- Part id
- lsi-csi/LS8297CT
- Category
- Stepper Motor Driver
- Package
- DIP-20
- Pins
- 20
- In stock
- 0 at JLCPCB (C3681359)
Overview
The LS8297CT is a stepper Motor Driver made by LSI/CSI in a DIP-20 package with 20 pins. 2 2 4.75V~7V Bipolar Driver STEP/DIR DIP-20 Stepper Motor Driver ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LS8297CT-S, from EasyEDA) and its footprint (Package_DIP:DIP-20_W7.62mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C3681359).
Symbol
Footprint
Pinout
20| Pin | Name | Type |
|---|---|---|
| 1 | SYNC | Unspecified |
| 2 | VSS | Unspecified |
| 3 | HOME | Unspecified |
| 4 | PHA | Unspecified |
| 5 | INH1# | Unspecified |
| 6 | PHB | Unspecified |
| 7 | PHC | Unspecified |
| 8 | INH2# | Unspecified |
| 9 | PHD | Unspecified |
| 10 | ENABLE | Unspecified |
| 11 | CONTROL | Unspecified |
| 12 | VDD | Unspecified |
| 13 | SENSE2 | Unspecified |
| 14 | SENSE1 | Unspecified |
| 15 | VREF | Unspecified |
| 16 | OSC | Unspecified |
| 17 | FWD/REV# | Unspecified |
| 18 | STEP# | Unspecified |
| 19 | HALF/FULL# | Unspecified |
| 20 | RESET# | Unspecified |
Parts like it
5L297N
DIP-20-40℃~+150℃ 1、2 4.75V~7V Bipolar Driver Power-on reset DIP-20 Stepper Motor Driver ROHSHGSEMIStepper Motor DriverL297/1
DIP-201、2 4.75V~7V Bipolar Driver STEP/DIR DIP-20 Stepper Motor Driver ROHSSTMicroelectronicsStepper Motor DriverL6225N
PDIP-20-25℃~+125℃ 1.4A 2 730mΩ 8V~52V Bipolar Driver Overcurrent Protection、Short-Circuit Protection、Over temperature protection、Under-voltage lockout、Motor step-out prevention function、Built-in charge pump、Dead-time / shoot-through protection Yes PDIP-20 Stepper Motor Driver ROHSSTMicroelectronicsStepper Motor DriverXD297
DIP-20-40℃~+85℃ 1、2 4.75V~7V Bipolar Driver DIP-20 Stepper Motor Driver ROHSXINLUDAStepper Motor DriverL6205N
PDIP-20-25℃~+125℃ 2 2.8A 300mΩ 8V~52V Bipolar Driver Overcurrent Protection、Short-Circuit Protection、Over temperature protection、Under-voltage lockout、Built-in charge pump、Dead-time / shoot-through protection Yes PDIP-20 Stepper Motor Driver ROHSSTMicroelectronicsStepper Motor Driver
Questions
Is there a KiCad symbol and footprint for the LS8297CT?
Yes. The symbol is EasyEDA_Cloud:LS8297CT-S and the footprint Package_DIP:DIP-20_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LS8297CT?
DIP-20, with 20 pins. Its footprint is drawn on this page.
Where can I order the LS8297CT?
JLCPCB lists it as part C3681359, with 0 in stock; the sellers' links on this page open their listings.
What can replace the LS8297CT?
Parts like it in the library: the L297N by HGSEMI, the L297/1 by STMicroelectronics, the L6225N by STMicroelectronics and the XD297 by XINLUDA. Check their datasheets: a part that fits the footprint may still differ in its ratings.