Skip to the content

ISM330BX

STMicroelectronicsExtended

-40℃~+85℃ 1.71V~3.6V 16bit 2.6uA 4.5KB IMU (accelerometer + gyroscope) Motion event detection、Synchronization and timestamp SPI、I2C、I3C X,Y,Z X,Y,Z ±4000dps ±8g LGA-14L(2.5x3) Accelerometers ROHS

DatasheetJLCPCBLCSC
Part id
st/ISM330BX
Category
Accelerometers
Package
LGA-14L(2.5x3)
Pins
14
In stock
12 at JLCPCB (C24178141)
Used on
3 open-source boards

Overview

The ISM330BX is an accelerometer made by STMicroelectronics in a LGA-14L(2.5x3) package with 14 pins. -40℃~+85℃ 1.71V~3.6V 16bit 2.6uA 4.5KB IMU (accelerometer + gyroscope) Motion event detection、Synchronization and timestamp SPI、I2C、I3C X,Y,Z X,Y,Z ±4000dps ±8g LGA-14L(2.5x3) Accelerometers ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:ISM330BXTR, from EasyEDA) and its footprint (EasyEDA_Cloud:LGA-14_L3.0-W2.5-P0.50-TL, from EasyEDA), ready for a KiCad board. 12 are in stock at JLCPCB (part C24178141). 3 open-source boards in 2 repositories on GitHub use it.

Symbol

SDO/TA01TDMout2BCLK3INT14VDDIO5AH1/QVAR16GND7VDD8AH2/QVAR29INT210WCLK11CS12SCL13SDA14
EasyEDA_Cloud:ISM330BXTRFrom EasyEDA

Footprint

EasyEDA_Cloud:LGA-14_L3.0-W2.5-P0.50-TLFrom EasyEDA

From the datasheet

10
Supply, least
1.71 V · VDD, recommended operating, min · p. 15
Supply, most
3.6 V · VDD, recommended operating, max · p. 15
Supply, least
1.08 V · VDDIO, recommended operating, min · p. 15
Supply, most
3.6 V · VDDIO, recommended operating, max · p. 15
Supply, absolute maximum
4.8 V · VDD, absolute maximum · p. 21
Works from
-40 °C · Operating temperature, min · p. 15
Works up to
85 °C · Operating temperature, max · p. 15
Takes working
600 µA · Gyroscope and accelerometer, high-performance mode, VDD = 1.8 V, 25°C, typical · p. 15
Takes asleep
2.6 µA · Gyroscope and accelerometer, power-down, VDD = 1.8 V, 25°C, typical · p. 15
A pin gives at most
4 mA · Digital pin source or sink, max driving capability · p. 15

Open-source boards using it

3
  • 2 layers100 × 50 mmIMU Board, the printed circuit board in 3D

    IMU Board

    phancak/IMU_Board

    6-Axis IMU + Qvar Sensing Node with Edge AI capabilities. Specialized for high-accuracy motion tracking and charge-variation detection in modular embedded systems.

    42 parts2MIT
  • 2 layers65 × 58.5 mmCarrier, the printed circuit board in 3D

    Carrier

    open-pasture/opencollar

    OpenCollar: a virtual-fence collar you can buy assembled or build from published parts.

    100 partsApache-2.0
  • 2 layers65 × 58.5 mmOpencollar carrier, the printed circuit board in 3D

    Opencollar carrier

    open-pasture/opencollar

    OpenCollar: a virtual-fence collar you can buy assembled or build from published parts.

    91 partsApache-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ISM330BX?

Yes. The symbol is EasyEDA_Cloud:ISM330BXTR and the footprint EasyEDA_Cloud:LGA-14_L3.0-W2.5-P0.50-TL, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ISM330BX?

LGA-14L(2.5x3), with 14 pins. Its footprint is drawn on this page.

Where is the ISM330BX datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the ISM330BX?

JLCPCB lists it as part C24178141, with 12 in stock; the sellers' links on this page open their listings.

What can replace the ISM330BX?

Parts like it in the library: the LSM6DSK320X by STMicroelectronics, the ICM-42688P-HXY by HXY MOSFET, the ICM-42688-P by TDK InvenSense and the LSM6DSVE by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ISM330BX?

3 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.