Skip to the content
1234567891011121314151617181920

74LCX245M

STMicroelectronicsExtended

SOIC-20-300mil Specialty Logic ROHS

Part id
st/74LCX245M
Category
Specialty Logic
Package
SOIC-20-300mil
Pins
20
In stock
0 at JLCPCB (C6021)
Used on
6 open-source boards

Overview

The 74LCX245M is a specialty Logic made by STMicroelectronics in a SOIC-20-300mil package with 20 pins. SOIC-20-300mil Specialty Logic ROHS.

PCBKit's library has its KiCad symbol (74xx:74HC245, from KiCad's library) and its footprint (Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C6021). 6 open-source boards in 5 repositories on GitHub use it.

Symbol

1A->B2A03A14A25A36A47A58A69A710GND11B712B613B514B415B316B217B118B019CE20VCC
74xx:74HC245From KiCad's library

Footprint

1234567891011121314151617181920
Package_SO:SOIC-20W_7.5x12.8mm_P1.27mmFrom KiCad's library

Pinout

20
The pins of the 74LCX245M
PinNameType
1A->BInput
2A0Tri-state
3A1Tri-state
4A2Tri-state
5A3Tri-state
6A4Tri-state
7A5Tri-state
8A6Tri-state
9A7Tri-state
10GNDPower in
11B7Tri-state
12B6Tri-state
13B5Tri-state
14B4Tri-state
15B3Tri-state
16B2Tri-state
17B1Tri-state
18B0Tri-state
19CEInput
20VCCPower in

Open-source boards using it

6
  • 2 layers100 × 100 mmDragonOne cpu rev03, the printed circuit board in 3D

    DragonOne cpu rev03

    kanpapa/MC68EZ328

    MC68EZ328 DragonOne SBC

    48 parts11BSD-3-Clause
  • 2 layers160 × 100 mmPIAD-18bits, the printed circuit board in 3D

    PIAD-18bits

    lnls-sirius/SPIxCONV

    This project consists of an 18-bit analog input (ADC) and output (DAC) within a range of 20 V (± 10 V) and 32 digital pins that can be either as inputs or outputs.

    178 parts1MIT
  • 2 layers124.5 × 87.5 mmS1VirtualFloppy, the printed circuit board in 3D

    S1VirtualFloppy

    bml3mk5/L3S1VirtualFloppy

    Virtual Floppy Card for HITACHI Basic Master Level3 / MB-S1

    71 parts
  • 4 layers295 × 285 mmKsys573, the printed circuit board in 3D

    Ksys573

    NaokiS28/Konami-System-573-Documentation

    Schematics and pinout information for the Konami System 573

    126 parts16
  • 2 layers175 × 80 mmVideoEncoder, the printed circuit board in 3D

    VideoEncoder

    stonedDiscord/Automatenplatinen

    Reverse engineerte Hardware aus deutschen Spielautomaten.

    47 parts5BSD-2-Clause
  • 2 layers110 × 100 mmPIAD-18bits, the printed circuit board in 3D

    PIAD-18bits

    lnls-sirius/SPIxCONV

    This project consists of an 18-bit analog input (ADC) and output (DAC) within a range of 20 V (± 10 V) and 32 digital pins that can be either as inputs or outputs.

    24 parts1MIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the 74LCX245M?

Yes. The symbol is 74xx:74HC245 and the footprint Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the 74LCX245M?

SOIC-20-300mil, with 20 pins. Its footprint is drawn on this page.

Where can I order the 74LCX245M?

JLCPCB lists it as part C6021, with 0 in stock; the sellers' links on this page open their listings.

What can replace the 74LCX245M?

Parts like it in the library: the 74FCT240ATSO8 by Renesas Electronics, the DM74LS240WMX by Fairchild Semicon, the MC74LS273DWR2 by MOTOROLA and the 74HC245D653 by NXP Semiconductors. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the 74LCX245M?

6 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.