
Rf board
PE1RGU/hf-antenna-switch
Remote HF antenna switch: 3 radios x 4 antennas (path to 8), outdoor relay unit with a hardware safety chain, controlled over Cat6 from a shack interface. KiCad 10, open hardware, designed together with an AI.
SlkorExtended
1 PNP 100MHz 100mA 100nA 200mW 220 45V 500mV 5V PNP SOT-23 Bipolar (BJT) ROHS
The BC857B is a bipolar made by Slkor in a SOT-23 package with 3 pins. 1 PNP 100MHz 100mA 100nA 200mW 220 45V 500mV 5V PNP SOT-23 Bipolar (BJT) ROHS.
PCBKit's library has its KiCad symbol (Transistor_BJT:BC857, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23, from KiCad's library), ready for a KiCad board. 55,292 are in stock at JLCPCB (part C556165). 7 open-source boards in 6 repositories on GitHub use it.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Collector-Base Voltage VCBO | BC857; Ta=25℃ | max -50 V | 1 |
| Collector-Emitter Voltage VCEO | BC857; Ta=25℃ | max -45 V | 1 |
| Collector Current –Continuous IC | Ta=25℃ | max -0.1 A | 1 |
| Collector Power Dissipation PC | Ta=25℃ | max 200 | 1 |
| Thermal Resistance From Junction To Ambient RΘJA | SOT-23; Ta=25℃ | max 625 ℃/W | 1 |
| Junction Temperature TJ | max 150 ℃ | 1 | |
| Storage Temperature Tstg | min -65 · max 150 ℃ | 1 | |
| Collector-base breakdown voltage VCBO | BC857; IC= -10uA, IE=0 | min -50 V | 2 |
| Collector-emitter breakdown voltage VCEO | BC857; IC= -10mA, IB=0 | min -45 V | 2 |
| Emitter-base breakdown voltage VEBO | IE= -1uA, IC=0 | min -5 V | 2 |
| Collector cut-off current ICBO | BC857; VCB= -45 V , IE=0 | max -0.1 uA | 2 |
| Emitter cut-off current IEBO | VEB= -5 V , IC=0 | max -0.1 uA | 2 |
| DC current gain hFE | BC857B; VCE= -5V,IC= -2mA | min 220 · max 475 | 2 |
| Collector-emitter saturation voltage VCE(sat) | IC=-100mA,IB= -5 mA | max -0.5 V | 2 |
| Base-emitter saturation voltage VBE(sat) | IC= -100mA, IB= -5mA | max -1.1 V | 2 |
| Transition frequency fT | VCE= -5 V, IC= -10mA; f=100MHz | min 100 MHz | 2 |
| Collector capacitance Cob | VCB=-10V, f=1MHz | max 4.5 pF | 2 |

PE1RGU/hf-antenna-switch
Remote HF antenna switch: 3 radios x 4 antennas (path to 8), outdoor relay unit with a hardware safety chain, controlled over Cat6 from a shack interface. KiCad 10, open hardware, designed together with an AI.



OpenRemise/Sniffer
The Sniffer is a small add-on board that turns a Raspberry Pi Pico into a DCC (and BiDi) logic analyzer.

PE1RGU/hf-antenna-switch
Remote HF antenna switch: 3 radios x 4 antennas (path to 8), outdoor relay unit with a hardware safety chain, controlled over Cat6 from a shack interface. KiCad 10, open hardware, designed together with an AI.


nikolajevs/PCB_EU
Сохраняются функции PCBV1: два LED-канала с общей яркостью, два независимых PWM/тахоканала вентиляторов, PTC, помпа, SHT4x, поплавок, RTC с CR2032, microSD, Wi-Fi и существующие функции интерфейса/расписаний.
Yes. The symbol is Transistor_BJT:BC857 and the footprint Package_TO_SOT_SMD:SOT-23, both drawn on this page. PCBKit places them on a board for you when you design with it.
SOT-23, with 3 pins. Its footprint is drawn on this page.
Slkor publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C556165, with 55,292 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the MMBT3904 by hongjiacheng, the S8050 by hongjiacheng, the SS8050 by hongjiacheng and the MMBT5551 by hongjiacheng. Check their datasheets: a part that fits the footprint may still differ in its ratings.
7 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.