Skip to the content
123

BD33FC0FP-E2

ROHM SemiconductorExtended

-25℃~+85℃@(Ta) 1 1A 26.5V 3.3V 500uA 700mV@(500mA) Fixed Over Current Protection、Thermal Shutdown Positive TO-252 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
rohm/BD33FC0FP-E2
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TO-252
Pins
3
In stock
621 at JLCPCB (C2846670)
Used on
11 open-source boards

Overview

The BD33FC0FP-E2 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by ROHM Semiconductor in a TO-252 package with 3 pins. -25℃~+85℃@(Ta) 1 1A 26.5V 3.3V 500uA 700mV@(500mA) Fixed Over Current Protection、Thermal Shutdown Positive TO-252 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:BD33FC0FP, from KiCad's library) and its footprint (Package_TO_SOT_SMD:TO-252-2, from KiCad's library), ready for a KiCad board. 621 are in stock at JLCPCB (part C2846670). 11 open-source boards in 9 repositories on GitHub use it.

Symbol

1VCC2GND3VO
Regulator_Linear:BD33FC0FPFrom KiCad's library

Footprint

123
Package_TO_SOT_SMD:TO-252-2From KiCad's library

From the datasheet

10
Supply, most
26.5 V · Vcc, recommended operating max for VO≧3.0V · p. 8
Supply, absolute maximum
35 V · Vcc, absolute maximum · p. 8
Works from
-25 °C · Ta, operating ambient min · p. 8
Works up to
85 °C · Ta, operating ambient max · p. 8
Junction, hottest
150 °C · Junction temperature max · p. 8
Takes working
500 µA · Vcc circuit current typical, Ta=25°C, Vcc=13.5V, IO=0mA · p. 8
Gives
1 A · Continuous output current max · p. 8
Output
3.3 V · Fixed output voltage nominal · p. 1
Junction to air (TO252-5 / TO252-3)
115.3 K/W · Junction to ambient typical, 1s PCB · p. 9
Junction to air (TO252-5 / TO252-3)
20.8 K/W · Junction to ambient typical, 2s2p PCB · p. 9

What it is and has

5
Output voltage accuracy
±1% at Ta=25°C · p. 1
Output stage
PDMOS · p. 1
Protection
Over-current protection · p. 1
Protection
Thermal shutdown · p. 1
Package
TO252-3 · p. 2

Around it

1
cap ≧2.2µF
between Vcc and GND; Input capacitor for 1.0≦VO<5.0V; choose capacitance for the application and supply wiring, with excellent voltage and temperature characteristics. · p. 30

Specifications

14
ParameterConditionsAs printedPage
Supply Voltage *1 VccTa=25°C; do not exceed Tjmaxmin -0.3 · max 35 V8
Operating Temperature Range Tamin -25 · max 85 ℃8
Storage Temperature Range Tstgmin -55 · max 150 ℃8
Maximum Junction Temperature Tjmaxmax 150 ℃8
Supply Voltage (VO≧3.0V) VccBD33FC0FP-E2; minimum is VO+1max 26.5 V8
Startup Voltage (IO=0mA) VccIO=0mAmax 3.8 V8
Output Current IOmin 0 · max 1 A8
Circuit Current IccTa=25°C, Vcc=13.5V, IO=0mAtyp 0.5 · max 2.5 mA8
Minimum dropout voltage ∆VdBD33FC0; Ta=25°C, Vcc=4.0V, IO=500mAtyp 0.4 · max 0.7 V8
Line Regulation Reg.ITa=25°C, IO=0mA, Vcc=VO+1.0V→26.5Vtyp 20 · max 80 mV8
Junction to Ambient θJATO252-3; 1s(Note 3); single-layer PCB based on JESD51-3typ 115.3 °C/W9
Junction to Ambient θJATO252-3; 2s2p(Note 4); four-layer PCB based on JESD51-5, 7typ 20.8 °C/W9
Junction to Top Characterization Parameter(Note 2) ΨJTTO252-3; 1s(Note 3); single-layer PCB based on JESD51-3typ 14 °C/W9
Junction to Top Characterization Parameter(Note 2) ΨJTTO252-3; 2s2p(Note 4); four-layer PCB based on JESD51-5, 7typ 3 °C/W9

Pins, by the datasheet

4
1 Vcc
Power Supply Pin · p. 3
2 N.C.
No Connection; leave OPEN. · p. 3
3 Vo
Output Pin · p. 3
FIN GND
GND · p. 3

Open-source boards using it

11See all 11
  • 4 layers85 × 56 mmAnthC, the printed circuit board in 3D

    AnthC

    Anthilla/AnthC

    Anthilla AnthC Board

    211 parts40
  • 2 layers170 × 140 mmLibreVerter Controller, the printed circuit board in 3D

    LibreVerter Controller

    imendizabal/LibreVerter

    Open Source Power Converter - Hardware Components

    215 parts22
  • 2 layers100 × 60 mmKINK box, the printed circuit board in 3D

    KINK box

    FunDeckHermit/KINK-box

    Audio amplifier / Web radio based on ESP32-S3

    112 parts2Apache-2.0
  • 2 layers42.7 × 37.8 mm04 Board, the printed circuit board in 3D

    04 Board

    ajuhidalgo/03_RGB_LED_STRIP_DRIVER

    ¡Buena suerte con tu proyecto! Si tienes alguna pregunta o necesitas más detalles, puedes ponerte en contacto conmigo.

    24 parts
  • 2 layers110 × 51.7 mmLine 5.0, the printed circuit board in 3D

    Line 5.0

    hughminhphan/PROJECTS

    My projects

    51 parts
  • 4 layers142.5 × 86.6 mmMain 5.0, the printed circuit board in 3D

    Main 5.0

    hughminhphan/PROJECTS

    My projects

    123 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the BD33FC0FP-E2?

Yes. The symbol is Regulator_Linear:BD33FC0FP and the footprint Package_TO_SOT_SMD:TO-252-2, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the BD33FC0FP-E2?

TO-252, with 3 pins. Its footprint is drawn on this page.

Where is the BD33FC0FP-E2 datasheet?

ROHM Semiconductor publishes it: the Datasheet link on this page opens it.

Where can I order the BD33FC0FP-E2?

JLCPCB lists it as part C2846670, with 621 in stock; the sellers' links on this page open their listings.

What can replace the BD33FC0FP-E2?

Parts like it in the library: the AMS1117CD-3.3 by UMW, the UZ1085L-33-TN3-R by UTC, the AMS1086CD-3.3 by Advanced Monolithic Systems and the NCP1117DT33RKG by onsemi. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the BD33FC0FP-E2?

11 boards in 9 repositories on GitHub; the most starred are listed on this page, with their KiCad files.