
Quickfeather board
antmicro/quickfeather-dev-board
This project contains open hardware design files for the QuickFeather development board based on the QuickLogic EOS S3 Sensor Processing Platform.

The EOSAI-S-PUN64 is an uncategorised made by QuickLogic with 65 pins.
PCBKit's library has its KiCad symbol (EOSAI-S-PUN64:EOSAI-S-PUN64, from Antmicro) and its footprint (qfn-64-1ep-8-5x8-5mm-p0-5mm-lay17x15:QFN-64-1EP_8.5x8.5mm_P0.5mm_Lay17x15, from Antmicro), ready for a KiCad board. 1 open-source board in 1 repository on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | VCCIOA | Power in |
| 2 | FBIO3/SENSOR_INT_0 | Input/output |
| 3 | FBIO4 | Input/output |
| 4 | FBIO_0/SCL_0 | Input/output |
| 5 | FBIO_1/SDA_0 | Input/output |
| 6 | FBIO2 | Input/output |
| 7 | FBIO_43/AP_INTERRUPT | Input/output |
| 8 | FBIO_44/SW_DP_IO | Input/output |
| 9 | FBIO_45/SW_DP_CLK | Input/output |
| 10 | FBIO_42 | Input/output |
| 11 | FBIO_39/SPI_HOST_SSn1 | Input/output |
| 12 | VCCIOB | Power in |
| 13 | FBIO_40/M_SSn1 | Input/output |
| 14 | FBIO_41 | Input/output |
| 15 | FBIO_37 | Input/output |
| 16 | FBIO_38/SPI_HOST_MOSI | Input/output |
| 17 | FBIO_36/SPI_HOST_MISO | Input/output |
| 18 | FBIO_35 | Input/output |
| 19 | FSOURCE | Passive |
| 20 | FBIO_34/SPI_HOST_CLK | Input/output |
| 21 | FBIO_33 | Input/output |
| 22 | FBIO_32 | Input/output |
| 23 | FBIO_31 | Input/output |
| 24 | VCCIOB | Passive |
| 25 | FBIO_30 | Input/output |
| 26 | FBIO_29 | Input/output |
| 27 | FBIO_28 | Input/output |
| 28 | FBIO_27 | Input/output |
| 29 | STM | Input |
| 30 | FBIO_26 | Input/output |
| 31 | FBIO_25 | Input/output |
| 32 | FBIO_24 | Input/output |
| 33 | FBIO_23 | Input/output |
| 34 | FBIO_22 | Input/output |
| 35 | VCCIOB | Passive |
| 36 | FBIO_19/SPI_DEVICE_MOSI | Input/output |
| 37 | FBIO_20/SPI_DEVICE_SSn | Input/output |
| 38 | FBIO_18 | Input/output |
| 39 | FBIO_21 | Input/output |
| 40 | FBIO_16/SPI_DEVICE_CLK | Input/output |
| 41 | SYS_RSTn | Input |
| 42 | FBIO_17/SPI_DEVICE_MISO | Input/output |
| 43 | AGND | Power in |
| 44 | XTAL_I | Input |
| 45 | XTAL_O | Input |
| 46 | AVDD | Power in |
| 47 | ADC1 | Input |
| 48 | ADC0 | Input |
| 49 | VDD1 | Power out |
| 50 | LDO_VIN | Power in |
| 51 | VDD2 | Power out |
| 52 | LDO_VIN | Passive |
| 53 | FBIO_15/SW_DP_IO | Input/output |
| 54 | FBIO_14/SW_DP_CLK | Input/output |
| 55 | FBIO13 | Input/output |
| 56 | FBIO12 | Input/output |
| 57 | FBIO11 | Input/output |
| 58 | VCCIOA | Passive |
| 59 | FBIO_10 | Input/output |
| 60 | FBIO_9 | Input/output |
| 61 | FBIO_8 | Input/output |
| 62 | FBIO_6/FCLK | Input/output |
| 63 | FBIO7 | Input/output |
| 64 | FBIO5/SDA_0_DPU | Input/output |
| 65 | GND | Power in |

antmicro/quickfeather-dev-board
This project contains open hardware design files for the QuickFeather development board based on the QuickLogic EOS S3 Sensor Processing Platform.
<iframe src="https://pcbkit.io/embed/parts/quicklogic/EOSAI-S-PUN64" title="EOSAI-S-PUN64 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/quicklogic/EOSAI-S-PUN64.jpg" alt="EOSAI-S-PUN64" width="1200" height="900">[](https://pcbkit.io/parts/quicklogic/EOSAI-S-PUN64)Yes. The symbol is EOSAI-S-PUN64:EOSAI-S-PUN64 and the footprint qfn-64-1ep-8-5x8-5mm-p0-5mm-lay17x15:QFN-64-1EP_8.5x8.5mm_P0.5mm_Lay17x15, both drawn on this page. PCBKit places them on a board for you when you design with it.
QuickLogic publishes it: the Datasheet link on this page opens it.
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.