
Pre filter
dfdtc/RMUC2026_RF
This is the pubilc repository of BNBU 2026 RMUC RF part of Radar
QorvoExtended
-40℃~+105℃ 0.3dB 19.5dB 22.7dBm 3.15V~5.25V DFN-8(2x2) Low Noise Amplifiers (LNA) - RF ROHS
The QPL9547 is a low Noise Amplifiers (LNA), RF made by Qorvo in a DFN-8(2x2) package with 9 pins. -40℃~+105℃ 0.3dB 19.5dB 22.7dBm 3.15V~5.25V DFN-8(2x2) Low Noise Amplifiers (LNA) - RF ROHS.
PCBKit's library has its KiCad symbol (RF_Amplifier:QPL9547, from KiCad's library) and its footprint (Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.5mm_EP0.8x1.6mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C5185128). 7 open-source boards in 6 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | Vb | Power in |
| 2 | — | Input |
| 3 | GND | Power in |
| 4 | GND | Passive |
| 5 | GND | Passive |
| 6 | EN | Passive |
| 7 | — | Output |
| 8 | GND | Passive |
| 9 | GND | Passive |

dfdtc/RMUC2026_RF
This is the pubilc repository of BNBU 2026 RMUC RF part of Radar

megmem044/Portfolio
This repo consists the source code for the different projects listed on my resume


Shehroz30/goes-receiver-lna-filter
Designing a GOES Satellite receiver's LNA and it's filter, operating at 1694.1 MHz.



Yes. The symbol is RF_Amplifier:QPL9547 and the footprint Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.5mm_EP0.8x1.6mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
DFN-8(2x2), with 9 pins. Its footprint is drawn on this page.
Qorvo publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C5185128, with 0 in stock; the sellers' links on this page open their listings.
7 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.