
W3011
Pulse ElecExtended
-40℃~+85℃ 1.1mm 1.4dBi、1.8dBi 1.5753GHz 1.6mm 2W 3.2mm 47.6MHz 50Ω 1206 Antennas ROHS
- Part id
- pulse-elec/W3011
- Category
- Antennas
- Package
- 1206
- Pins
- 2
- In stock
- 549 at JLCPCB (C6604735)
- Used on
- 4 open-source boards
Overview
The W3011 is an antenna made by Pulse Elec in a 1206 package with 2 pins. -40℃~+85℃ 1.1mm 1.4dBi、1.8dBi 1.5753GHz 1.6mm 2W 3.2mm 47.6MHz 50Ω 1206 Antennas ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:W3011, from EasyEDA) and its footprint (Resistor_SMD:R_1206_3216Metric, from KiCad's library), ready for a KiCad board. 549 are in stock at JLCPCB (part C6604735). 4 open-source boards in 4 repositories on GitHub use it.
Symbol
Footprint
Pinout
2| Pin | Name | Type |
|---|---|---|
| 1 | Feed/GND | Unspecified |
| 2 | Feed/GND | Unspecified |
Open-source boards using it
4- 2 layers41 × 59 mm

- 4 layers70 × 40 mm

Flight comp srad-2026
vito-pp/FlightComputer-SRAD-2026
HW and SW documentation of a Student Researched And Developed (SRAD) flight computer in charge of telemetry for ITBA's rocketry team 2026
86 parts3 - 4 layers220 × 111.8 mm

MetSensorSuiteEmbeddedFirmware
Lowcost-Radiosonde-Research-Project/MetSensorSuiteEmbeddedFirmware
This is the source code that runs on the Sensor Suite pico which handles reading from sensors, calculating needed products and building data packets
91 partsBSD-3-Clause - 4 layers25.4 × 25.4 mm

Zeo1.2 devboard
zeodotdev/zeo-boards
ESP32-S3 development board with onboard BME280 (temperature, humidity, pressure) and LSM6DS3 (6-axis IMU) sensors. This repo contains the designs, ESP-IDF firmware, and a Python plotter for visualization.
92 parts3
Parts like it
8AMCA31-2R450G-S1F-T3
1206-40℃~+85℃ 0.5dBi 1.2mm 1.6mm 100MHz 2 2.45GHz 3.2mm 3W 50Ω Patch Antenna 1206 Antennas ROHSAbraconAntennasKH-3216-H0209
1206-40℃~+110℃ 0.45mm 1.66mm 1.71dBi 120MHz 2.45GHz 3.23mm 4W 50Ω Patch Antenna 1206 Antennas ROHSShenzhen Kinghelm ElecAntennasSLDA31-2R400G-S2TF
1206-40℃~+85℃ 1.6mm 100MHz 2 2.4GHz 2.5dBi 3.2mm 3W 50Ω Patch Antenna 1206 Antennas ROHSSunlordAntennasKH-3216F245C04
1206-40℃~+85℃ 0.45mm 1.66mm 1.75dBi 120MHz 2.45GHz 3.23mm 4W 50Ω Patch Antenna 1206 Antennas ROHSShenzhen Kinghelm ElecAntennas2450AT18A100E
1206-40℃~+125℃ 0.5dBi 1.3mm 1.6mm 2.4GHz 2W 3.2mm 50Ω Patch Antenna SMA 1206 Antennas ROHSJohanson DielectricsAntennasKH-3216F245W36
1206-40℃~+85℃ 1.23mm 1.66mm 100MHz 2.45GHz 2.71dBi 3.23mm 4W 50Ω Patch Antenna 1206 Antennas ROHSShenzhen Kinghelm ElecAntennas2450AT18B100E
1206-45℃~+125℃ 0.5dBi 1.3mm 1.6mm 100MHz 2.45GHz 2W 3.2mm 50Ω Patch Antenna 1206 Antennas ROHSJohanson DielectricsAntennasSLDA31-2R800G-S1TF
1206-40℃~+85℃ 0.5dBi 1.2mm 1.6mm 100MHz 2 2.8GHz 3.2mm 3W 50Ω Patch Antenna 1206 Antennas ROHSSunlordAntennas
Questions
Is there a KiCad symbol and footprint for the W3011?
Yes. The symbol is EasyEDA_Cloud:W3011 and the footprint Resistor_SMD:R_1206_3216Metric, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the W3011?
1206, with 2 pins. Its footprint is drawn on this page.
Where is the W3011 datasheet?
Pulse Elec publishes it: the Datasheet link on this page opens it.
Where can I order the W3011?
JLCPCB lists it as part C6604735, with 549 in stock; the sellers' links on this page open their listings.
What can replace the W3011?
Parts like it in the library: the AMCA31-2R450G-S1F-T3 by Abracon, the KH-3216-H0209 by Shenzhen Kinghelm Elec, the SLDA31-2R400G-S2TF by Sunlord and the KH-3216F245C04 by Shenzhen Kinghelm Elec. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the W3011?
4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.