Skip to the content

NCV303LSN49

onsemiExtended

-40℃~+125℃@(Ta) 1 800mV~10V Active Low No No Voltage Detector TSOP-5 Supervisor and Reset ICs ROHS

Part id
onsemi/NCV303LSN49
Category
Monitors & Reset Circuits
Package
TSOP-5
Pins
5
In stock
0 at JLCPCB (C603895)

Overview

The NCV303LSN49 is a monitors & Reset Circuit made by onsemi in a TSOP-5 package with 5 pins. -40℃~+125℃@(Ta) 1 800mV~10V Active Low No No Voltage Detector TSOP-5 Supervisor and Reset ICs ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:NCV303LSN49T1G, from EasyEDA) and its footprint (Package_SO:TSOP-5_1.65x3.05mm_P0.95mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C603895).

Symbol

The library has no symbol for this part yet.

Footprint

The library has no footprint for this part yet.

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the NCV303LSN49?

Yes. The symbol is EasyEDA_Cloud:NCV303LSN49T1G and the footprint Package_SO:TSOP-5_1.65x3.05mm_P0.95mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the NCV303LSN49?

TSOP-5, with 5 pins. Its footprint is drawn on this page.

Where is the NCV303LSN49 datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the NCV303LSN49?

JLCPCB lists it as part C603895, with 0 in stock; the sellers' links on this page open their listings.

What can replace the NCV303LSN49?

Parts like it in the library: the NCP303LSN09T1G by onsemi, the NCP300LSN30 by onsemi, the NCP301LSN09 by onsemi and the NCP302LSN40 by onsemi. Check their datasheets: a part that fits the footprint may still differ in its ratings.