Skip to the content
12345

NCP300LSN30

onsemiExtended

-40℃~+125℃@(TA) 1 3V 6us 800mV~10V Active Low Push-pull Voltage Detector TSOP-5 Supervisor and Reset ICs ROHS

Part id
onsemi/NCP300LSN30
Category
Monitors & Reset Circuits
Package
TSOP-5
Pins
5
In stock
0 at JLCPCB (C184082)

Overview

The NCP300LSN30 is a monitors & Reset Circuit made by onsemi in a TSOP-5 package with 5 pins. -40℃~+125℃@(TA) 1 3V 6us 800mV~10V Active Low Push-pull Voltage Detector TSOP-5 Supervisor and Reset ICs ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:NCP300LSN41T1, from EasyEDA) and its footprint (Package_SO:TSOP-5_1.65x3.05mm_P0.95mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C184082).

Symbol

1ResetOutput2Input3Ground4N.C.5N.C.
EasyEDA_Cloud:NCP300LSN41T1From EasyEDA

Footprint

12345
Package_SO:TSOP-5_1.65x3.05mm_P0.95mmFrom KiCad's library

Pinout

5
The pins of the NCP300LSN30
PinNameType
1ResetOutputUnspecified
2InputUnspecified
3GroundUnspecified
4N.C.Unspecified
5N.C.Unspecified

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the NCP300LSN30?

Yes. The symbol is EasyEDA_Cloud:NCP300LSN41T1 and the footprint Package_SO:TSOP-5_1.65x3.05mm_P0.95mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the NCP300LSN30?

TSOP-5, with 5 pins. Its footprint is drawn on this page.

Where is the NCP300LSN30 datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the NCP300LSN30?

JLCPCB lists it as part C184082, with 0 in stock; the sellers' links on this page open their listings.

What can replace the NCP300LSN30?

Parts like it in the library: the NCP303LSN09T1G by onsemi, the NCP301LSN09 by onsemi, the NCP302LSN40 by onsemi and the NCP303LSN18 by onsemi. Check their datasheets: a part that fits the footprint may still differ in its ratings.