
Hardware deneme
KerimAltuntecim/esp32-pcb-control-system
ESP32-C3 PCB control system with Nextion HMI, motor, sensor and power-driver interfaces.
onsemiExtended
-40℃~+85℃ 1 1.15V 4.17kV 400V 60mA No TRIAC DIP-6 Triac, SCR Output Optoisolators ROHS
The MOC3022M is a triac, SCR Output Optoisolator made by onsemi in a DIP-6 package with 6 pins. -40℃~+85℃ 1 1.15V 4.17kV 400V 60mA No TRIAC DIP-6 Triac, SCR Output Optoisolators ROHS.
PCBKit's library has its KiCad symbol (Relay_SolidState:MOC3022M, from KiCad's library) and its footprint (Package_DIP:DIP-6_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 26,027 are in stock at JLCPCB (part C8917). 3 open-source boards in 3 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | — | Passive |
| 2 | — | Passive |
| 3 | NC | Not connected |
| 4 | — | Passive |
| 5 | NC | Not connected |
| 6 | — | Passive |

KerimAltuntecim/esp32-pcb-control-system
ESP32-C3 PCB control system with Nextion HMI, motor, sensor and power-driver interfaces.

VictorMichels/Kicad-1000W-Thyristor-Controlled-PSU
Tested and working schematic and PCB layout design for a single-phase semi-controlled full-bridge rectifier

Yes. The symbol is Relay_SolidState:MOC3022M and the footprint Package_DIP:DIP-6_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.
DIP-6, with 6 pins. Its footprint is drawn on this page.
onsemi publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C8917, with 26,027 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the EL3053 by Everlight Electronics, the MOC3052 by Lite-On, the MOC3053M(UMW) by UMW and the MOC3081M(UMW) by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.
3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.