Skip to the content
123456

MOC3011M

onsemiExtended

-40℃~+85℃ 0.1mA 1 1.15V 10mA 1A 1A 250V 330mW 4.17kV 6 No TRIAC DIP-6 Triac, SCR Output Optoisolators ROHS

Part id
onsemi/MOC3011M
Category
Triac, SCR Output Optoisolators
Package
DIP-6
Pins
6
In stock
18 at JLCPCB (C232860)
Used on
7 open-source boards

Overview

The MOC3011M is a triac, SCR Output Optoisolator made by onsemi in a DIP-6 package with 6 pins. -40℃~+85℃ 0.1mA 1 1.15V 10mA 1A 1A 250V 330mW 4.17kV 6 No TRIAC DIP-6 Triac, SCR Output Optoisolators ROHS.

PCBKit's library has its KiCad symbol (Relay_SolidState:MOC3011M, from KiCad's library) and its footprint (Package_DIP:DIP-6_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 18 are in stock at JLCPCB (part C232860). 7 open-source boards in 7 repositories on GitHub use it.

Symbol

1246
Relay_SolidState:MOC3011MFrom KiCad's library

Footprint

123456
Package_DIP:DIP-6_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Pinout

6
The pins of the MOC3011M
PinNameType
1—Passive
2—Passive
3NCNot connected
4—Passive
5NCNot connected
6—Passive

Open-source boards using it

7
  • 2 layersCoffee Roaster Project, the printed circuit board in 3D

    Coffee Roaster Project

    eddietheengineer/autocoffeeroaster

    Convert an original Poppery popcorn popper in to an automatic coffee roaster

    19 parts1
  • 2 layers59 × 99 mmXJ H01, the printed circuit board in 3D

    XJ H01

    adnksharp/aks-arduino-module-sensors-shield

    Shield para modulos de sensores de Arduino a Cajas de contacto

    22 partsGPL-3.0
  • 2 layers228.6 × 47.6 mmHive13-light pcb, the printed circuit board in 3D

    Hive13-light pcb

    Hive13/hive13-light-pcb

    The KiCad files for the lounge light controllers

    48 partsBSD-3-Clause
  • 2 layers82.6 × 67.3 mmShield rev1, the printed circuit board in 3D

    Shield rev1

    kosme/my_shapeoko

    Upgrades and tweaks for Shapeoko 1 and maybe 2

    19 parts
  • 2 layers97.5 × 81 mmPower, the printed circuit board in 3D

    Power

    CH-Microsystems/pico_coffee_roaster

    Raspbery Pi Pico coffe roaster project

    25 parts2MIT
  • 2 layers77.6 × 78.1 mmSCRController, the printed circuit board in 3D

    SCRController

    UAA-F14/PCBs-Design

    Power electronics PCB coursework — SCR controller, buck converter, Class D amplifier, DC-AC inverter, and a protected power supply Resources

    43 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MOC3011M?

Yes. The symbol is Relay_SolidState:MOC3011M and the footprint Package_DIP:DIP-6_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MOC3011M?

DIP-6, with 6 pins. Its footprint is drawn on this page.

Where is the MOC3011M datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the MOC3011M?

JLCPCB lists it as part C232860, with 18 in stock; the sellers' links on this page open their listings.

What can replace the MOC3011M?

Parts like it in the library: the EL3053 by Everlight Electronics, the MOC3052 by Lite-On, the MOC3053M(UMW) by UMW and the MOC3081M(UMW) by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MOC3011M?

7 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.