2 layers
2 layers228.6 × 47.6 mm
Hive13-light pcb
Hive13/hive13-light-pcbThe KiCad files for the lounge light controllers
- Size
- 228.6 × 47.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 48
- Nets
- 51
- Pads
- 135
- Tracks, vias
- 175, 0
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 15 Dec 2018
- Updated
- 24 Dec 2018
Overview
Hive13-light pcb is an open-source printed circuit board by Hive13, from the Hive13/hive13-light-pcb repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 228.6 × 47.6 mm with 48 parts on 51 nets, routed with 175 tracks and 0 vias.
It is built around the DS18B20 and MOC3011M. Its parts include 16 resistors, 10 connectors, 7 ICs, 5 capacitors and 5 diodes.
Main components
2README
README.mdhive13-light-pcb
The KiCad files for the lounge light controllers
Parts
48| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | Conn_01x01_Male | 250-Tab:250 Tab | J1, J2, J3, J4, J5, J6, J7, J8, J9, J10 |
| 4 | .01MFD | Capacitor_THT:C_Disc_D16.0mm_W5.0mm_P7.50mm | C1, C2, C3, C4 |
| 4 | 220Ω | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R6, R7, R8 |
| 4 | 390Ω | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4 |
| 4 | 39Ω | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R9, R10, R11, R12 |
| 4 | MOC3011M | Package_DIP:DIP-6_W7.62mm | U1, U2, U3, U4 |
| 4 | Q_TRIAC_A1A2G | Package_TO_SOT_THT:TO-220-3_Vertical | D1, D2, D3, D4 |
| 2 | 15kΩ | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R13, R14 |
| 2 | 4.7kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R15, R16 |
| 1 | 100MFD | Capacitor_THT:CP_Radial_D13.0mm_P5.00mm | C5 |
| 1 | 4N25 | Package_DIP:DIP-6_W7.62mm | U5 |
| 1 | DS18B20 | Package_TO_SOT_THT:TO-92L_Inline | U7 |
| 1 | D_Bridge_+-AA | 5V-AC-Module:5V-AC-Module | D5 |
| 1 | Fuse | Fuse:Fuseholder5x20_7 | F1 |
| 1 | WeMos_mini | wemos_d1_mini:D1_mini_board | U6 |
The 44 most common of 48 parts.
Similar boards
- 2 layers
Coffee Roaster Project
eddietheengineer/autocoffeeroaster
Convert an original Poppery popcorn popper in to an automatic coffee roaster
19 parts1 - 2 layers59 × 99 mm
XJ H01
adnksharp/aks-arduino-module-sensors-shield
Shield para modulos de sensores de Arduino a Cajas de contacto
22 partsGPL-3.0 - 2 layers82.6 × 67.3 mm
- 2 layers97.5 × 81 mm
- 2 layers77.6 × 78.1 mm
SCRController
UAA-F14/PCBs-Design
Power electronics PCB coursework — SCR controller, buck converter, Class D amplifier, DC-AC inverter, and a protected power supply Resources
43 parts1 - 2 layers33.7 × 97.8 mm
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 2 layers121 × 68 mm
Freeds sanchez
pablozg/freeds
Derivador de energía solar excedente creado por Pablo Zerón, Diseño PCB por Amcalo, Tester original por Aeizoon, Wiki por Zoilo Mora
42 parts108
Questions
How big is the Hive13-light pcb PCB?
It measures 228.6 × 47.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hive13-light pcb use?
48 parts, built around the DS18B20 and MOC3011M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hive13-light pcb KiCad files?
From the Hive13/hive13-light-pcb repository on GitHub, at the commit this page was made from: the board is hive13-light-pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hive13-light pcb design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).