Skip to the content
12

MBRS1100

onsemiExtended

-65℃~+175℃ 1 Independent 100V 1A 500uA@100V 750mV@1A SMB(DO-214AA) Schottky Diodes ROHS

Part id
onsemi/MBRS1100
Category
Schottky Diodes
Package
SMB(DO-214AA)
Pins
2
In stock
23,158 at JLCPCB (C82068)
Used on
5 open-source boards

Overview

The MBRS1100 is a schottky Diode made by onsemi in a SMB(DO-214AA) package with 2 pins. -65℃~+175℃ 1 Independent 100V 1A 500uA@100V 750mV@1A SMB(DO-214AA) Schottky Diodes ROHS.

PCBKit's library has its KiCad symbol (Device:D_Schottky, from KiCad's library) and its footprint (Diode_SMD:D_SMB, from KiCad's library), ready for a KiCad board. 23,158 are in stock at JLCPCB (part C82068). 5 open-source boards in 4 repositories on GitHub use it.

Symbol

Device:D_SchottkyFrom KiCad's library

Footprint

12
Diode_SMD:D_SMBFrom KiCad's library

From the datasheet

5
Reverse voltage, most
100 V · Maximum DC blocking and repetitive reverse voltage · p. 2
Forward current, most
1 A · Maximum average rectified forward current at TL = 163°C · p. 2
Forward current, most
2 A · Maximum average rectified forward current at TL = 148°C · p. 2
Junction, hottest
175 °C · Maximum operating junction temperature · p. 2
Forward voltage
750 mV · Maximum instantaneous forward voltage at 1.0 A, TJ = 25°C · p. 2

What it is and has

5
Package
Surface mount with J-Bend leads · p. 1
Junction
Oxide passivated · p. 1
Protection
Guardring for stress protection · p. 1
Qualification
AEC−Q101 qualified and PPAP capable · p. 1
Polarity marking
Cathode polarity band · p. 1

Specifications

12
ParameterConditionsAs printedPage
Peak Repetitive Reverse Voltage VRRMMBRS1100T3max 100 V2
Working Peak Reverse Voltage VRWMMBRS1100T3max 100 V2
DC Blocking Voltage VRMBRS1100T3max 100 V2
Average Rectified Forward Current IF(AV)TL = 163°Cmax 1 A2
Average Rectified Forward Current IF(AV)TL = 148°Cmax 2 A2
Non−Repetitive Peak Surge Current IFSMSurge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hzmax 50 A2
Operating Junction Temperature (Note 1) TJThe heat generated must be less than the thermal conductivity from Junction−to−Ambient: dPD/dTJ < 1/RqJA.min -65 · max 175 °C2
Voltage Rate of Change dv/dtmax 10 V/ns2
Thermal Resistance − Junction−to−Lead RqJLTL = 25°C; SMBmax 22 °C/W2
Maximum Instantaneous Forward Voltage (Note 2) VFiF = 1.0 A, TJ = 25°C; Pulse Width = 300 ms, Duty Cycle ≤ 2.0%max 0.75 V2
Maximum Instantaneous Reverse Current (Note 2) IRRated dc Voltage, TJ = 25°C; Pulse Width = 300 ms, Duty Cycle ≤ 2.0%max 0.5 mA2
Maximum Instantaneous Reverse Current (Note 2) IRRated dc Voltage, TJ = 100°C; Pulse Width = 300 ms, Duty Cycle ≤ 2.0%max 5 mA2

Ordering codes, by the datasheet

4
MBRS1100T3G
SMB (Pb−Free) · 100 V; marking B1C; 2500 / Tape & Reel · p. 2
SBRS81100T3G
SMB (Pb−Free) · SBRS8 prefix for automotive and other applications requiring unique site and control change requirements; marking B1C; 2500 / Tape & Reel · p. 2
MBRS190T3G
SMB (Pb−Free) · 90 V; marking B19; 2500 / Tape & Reel · p. 2
SBRS8190T3G
SMB (Pb−Free) · SBRS8 prefix for automotive and other applications requiring unique site and control change requirements; marking B19; 2500 / Tape & Reel · p. 2

Open-source boards using it

5
  • 2 layers140.1 × 50 mmBms1818, the printed circuit board in 3D

    Bms1818

    GliderWinchItems/BMS

    Battery Management System

    290 parts5
  • 2 layers109 × 31.5 mmLT8300 Flyback RevA, the printed circuit board in 3D

    LT8300 Flyback RevA

    omarothman2004/Isolated-DC-DC-Flyback-Converter

    An isolated flyback power converter PCB that uses a custom high-frequency transformer. The transformer acts as a galvanically isolated, coupled inductor.

    22 partsMIT
  • 2 layers50.8 × 26.7 mmMistMakerV1-4, the printed circuit board in 3D

    MistMakerV1-4

    Dav1dyang/Programmable-Mist-Maker

    An open-source, low-cost ultrasonic mist maker designed to share commercial humidifier circuits and empower creators with accessible, well-documented hardware.

    54 parts26MIT
  • 2 layers38 × 65 mmRauchmelder 3.6, the printed circuit board in 3D

    Rauchmelder 3.6

    selfbus/hardware-merged

    Hardware for KNX devices

    59 parts5

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MBRS1100?

Yes. The symbol is Device:D_Schottky and the footprint Diode_SMD:D_SMB, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MBRS1100?

SMB(DO-214AA), with 2 pins. Its footprint is drawn on this page.

Where is the MBRS1100 datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the MBRS1100?

JLCPCB lists it as part C82068, with 23,158 in stock; the sellers' links on this page open their listings.

What can replace the MBRS1100?

Parts like it in the library: the SS510B by hongjiacheng, the SS310B by MDD, the SS520B by Shandong Jingdao Microelectronics and the SS310 by ElecSuper. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MBRS1100?

5 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.