Skip to the content
2 layers109 × 31.5 mmLT8300 Flyback RevA, the printed circuit board in 3D

An isolated flyback power converter PCB that uses a custom high-frequency transformer. The transformer acts as a galvanically isolated, coupled inductor.

Size
109 × 31.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
22
Nets
14
Pads
58
Tracks, vias
128, 17
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
16 Oct 2026
Updated
16 Oct 2026

Overview

LT8300 Flyback RevA is an open-source printed circuit board by omarothman2004, from the omarothman2004/Isolated-DC-DC-Flyback-Converter repository on GitHub, published under the MIT licence. It is a 2-layer board of 109 × 31.5 mm with 22 parts on 14 nets, routed with 128 tracks and 17 vias.

It is built around the MBRS1100. Its parts include 4 capacitors, 3 resistors, 2 connectors, 1 IC and 1 diode. It belongs with the power boards of this library.

Main components

1

README

README.md

Flyback Power Converter PCB

Overview

This repository contains the complete PCB design package for an isolated transformer-based flyback converter. It demonstrates primary-secondary isolation, snubber network design, and feedback regulation.

Features

  • Isolated topology with a Wurth, high-frequency magnetic transformer.
  • P-coil and S-coil return path (GND) isolation
  • RCD snubber circuit to provide safety against voltage spikes, caused by leakage inductance.

Repository Structure

  • /schematic: KiCad schematic capture files.
  • /pcb: Multi-layer board layout files.
  • /docs: Datasheets, calculations, and fabrication outputs.

Parts

22
QtyValueFootprintReferences
21MResistor_SMD:R_0805_2012MetricR1, R3
247µCapacitor_SMD:C_1210_3225MetricC3, C4
10.001µCapacitor_SMD:C_0805_2012MetricCSNUB1
110KResistor_SMD:R_1206_3216MetricRSNUB1
116Resistor_SMD:R_2512_6332MetricRLOAD1
11N4148Diode_SMD:D_SOD-123DSNUB1
140.2KResistor_SMD:R_0805_2012MetricR2
147nCapacitor_SMD:C_0805_2012MetricC2
147uCapacitor_SMD:C_1210_3225MetricC1
15nInductor_SMD:L_0805_2012MetricL_EMI_1
1EPQ13_6389_10PINS_750318525Transformer_SMD_Wurth:T_Wurth_WE-FLYTI-EPQ13_6389_10PINST1
1InputTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ1
1LT8300Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mmU1
1MBRS1100Diode_SMD:D_SMBD1
1OutputTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ2
1TP_PRI_GNDTestPoint:TestPoint_Pad_1.5x1.5mmTP2
1TP_SWTestPoint:TestPoint_Pad_1.5x1.5mmTP3
1TP_VINTestPoint:TestPoint_Pad_1.5x1.5mmTP1
1TP_VOUT+TestPoint:TestPoint_Pad_1.5x1.5mmTP4
1TP_VOUT-TestPoint:TestPoint_Pad_1.5x1.5mmTP5

Similar boards

  • 2 layers140.1 × 50 mmBms1818, the printed circuit board in 3D

    Bms1818

    GliderWinchItems/BMS

    Battery Management System

    290 parts5
  • 2 layers50.8 × 26.7 mmMistMakerV1-4, the printed circuit board in 3D

    MistMakerV1-4

    Dav1dyang/Programmable-Mist-Maker

    An open-source, low-cost ultrasonic mist maker designed to share commercial humidifier circuits and empower creators with accessible, well-documented hardware.

    54 parts26MIT
  • 2 layers158 × 11 mmDaylight Matchstick, the printed circuit board in 3D

    Daylight Matchstick

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    22 parts1.1kGPL-3.0
  • 2 layers57 × 65 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    22 parts1kGPL-3.0
  • 2 layers81 × 57.2 mmRP2040-Macropad, the printed circuit board in 3D

    RP2040-Macropad

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    22 parts915
  • 2 layers54.6 × 70.9 mmBeagleLogic Cape, the printed circuit board in 3D

    BeagleLogic Cape

    abhishek-kakkar/BeagleLogic

    A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.

    22 parts479GPL-3.0
  • 2 layers66.4 × 24.5 mmConnecting piece, the printed circuit board in 3D

    Connecting piece

    Chrismettal/flipper-zero-backpacks

    Backpack-style addon boards for the Flipper Zero!

    22 parts456

Questions

How big is the LT8300 Flyback RevA PCB?

It measures 109 × 31.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LT8300 Flyback RevA use?

22 parts, built around the MBRS1100. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LT8300 Flyback RevA KiCad files?

From the omarothman2004/Isolated-DC-DC-Flyback-Converter repository on GitHub, at the commit this page was made from: the board is kicad/LT8300_Flyback_RevA.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the LT8300 Flyback RevA design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).