Skip to the content
123

LP2950CDT-3.3

onsemiExtended

-40℃~+125℃@(Ta) 1 100mA 126uVrms 3.3V 30V 380mV@(100mA) 93uA Fixed Over Current Protection、Over Temperature Protection Positive TO-252-2(DPAK) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
onsemi/LP2950CDT-3.3
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TO-252-2(DPAK)
Pins
3
In stock
8,144 at JLCPCB (C233210)
Used on
2 open-source boards

Overview

The LP2950CDT-3.3 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by onsemi in a TO-252-2(DPAK) package with 3 pins. -40℃~+125℃@(Ta) 1 100mA 126uVrms 3.3V 30V 380mV@(100mA) 93uA Fixed Over Current Protection、Over Temperature Protection Positive TO-252-2(DPAK) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUT, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:TO-252-2, from KiCad's library), ready for a KiCad board. 8,144 are in stock at JLCPCB (part C233210). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

1IN3OUT2GND
Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUTFrom PCBKit's generic symbols

Footprint

123
Package_TO_SOT_SMD:TO-252-2From KiCad's library

Pinout

3
The pins of the LP2950CDT-3.3
PinNameType
1INPower in
2GNDPower in
3OUTPower out

Open-source boards using it

2
  • 4 layers100.5 × 61.3 mmTanfolyamRobot, the printed circuit board in 3D

    TanfolyamRobot

    legokor/TanfolyamRobot

    Korábban az STMicroelectronics által biztosított STM32CubeIDE-t használtuk a firmware fejlesztéséhez, azonban ez egy elég nehézkes és lassú eszköz.

    79 parts2
  • 2 layers89 × 99 mmIsouart4, the printed circuit board in 3D

    Isouart4

    nedko/isouart4

    87 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LP2950CDT-3.3?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUT and the footprint Package_TO_SOT_SMD:TO-252-2, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LP2950CDT-3.3?

TO-252-2(DPAK), with 3 pins. Its footprint is drawn on this page.

Where is the LP2950CDT-3.3 datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the LP2950CDT-3.3?

JLCPCB lists it as part C233210, with 8,144 in stock; the sellers' links on this page open their listings.

What can replace the LP2950CDT-3.3?

Parts like it in the library: the AMS1117CD-3.3 by UMW, the UZ1085L-33-TN3-R by UTC, the AMS1086CD-3.3 by Advanced Monolithic Systems and the NCP1117DT33RKG by onsemi. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LP2950CDT-3.3?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.