Skip to the content
123456

FDC610PZ

onsemiExtended

-55℃~+150℃ 1 P-Channel 1.005nF 1.6W 190pF 195pF 24nC@10V 30V 3V 4.9A 75mΩ@4.5V P-Channel ±25V SuperSOT-6 MOSFETs ROHS

Part id
onsemi/FDC610PZ
Category
MOSFETs
Package
SuperSOT-6
Pins
6
In stock
46 at JLCPCB (C241761)
Used on
3 open-source boards

Overview

The FDC610PZ is a MOSFET made by onsemi in a SuperSOT-6 package with 6 pins. -55℃~+150℃ 1 P-Channel 1.005nF 1.6W 190pF 195pF 24nC@10V 30V 3V 4.9A 75mΩ@4.5V P-Channel ±25V SuperSOT-6 MOSFETs ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Q_PMOS_1D_2D_3G_4S_5D_6D, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:SuperSOT-6, from KiCad's library), ready for a KiCad board. 46 are in stock at JLCPCB (part C241761). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

Pinmap_Generic:Q_PMOS_1D_2D_3G_4S_5D_6DFrom PCBKit's generic symbols

Footprint

123456
Package_TO_SOT_SMD:SuperSOT-6From KiCad's library

Pinout

6
The pins of the FDC610PZ
PinNameType
1DPassive
2DPassive
3GInput
4SPassive
5DPassive
6DPassive

Open-source boards using it

3
  • 2 layers50 × 50 mmOpen Battery Charger, the printed circuit board in 3D

    Open Battery Charger

    DavidVeloz95/Open-Source-Battery-Smart-Charger

    Embedded power electronics project: intelligent 2S Li-Ion charger with protection, power switching and monitoring, designed in KiCad.

    47 partsMIT
  • 4 layers75 × 65 mmCam, the printed circuit board in 3D

    Cam

    elktownlabs/murgcam

    Autonomous, time-based, low power still camera

    116 parts
  • 2 layers100 × 60 mmAlarming AC Enclosure, the printed circuit board in 3D

    Alarming AC Enclosure

    manhoosbilli1/atmega328-enclosure-tamper-alarm

    ATmega328 AC enclosure tamper/intrusion alarm with LTC2960 voltage monitor, LTC4412 PowerPath, boost+buck converters

    98 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the FDC610PZ?

Yes. The symbol is Pinmap_Generic:Q_PMOS_1D_2D_3G_4S_5D_6D and the footprint Package_TO_SOT_SMD:SuperSOT-6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the FDC610PZ?

SuperSOT-6, with 6 pins. Its footprint is drawn on this page.

Where is the FDC610PZ datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the FDC610PZ?

JLCPCB lists it as part C241761, with 46 in stock; the sellers' links on this page open their listings.

What can replace the FDC610PZ?

Parts like it in the library: the FDC8884 by onsemi, the FDC855N by onsemi, the FDC655AN by onsemi and the SI3456DV by onsemi. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the FDC610PZ?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.