Skip to the content

ESD9B3.3S

onsemiExtended

-55℃~+150℃@(Tj) 1 10.5V、11.5V 100nA 15pF 2A 3.3V 7V Bidirectional ESD IEC 61000-4-2 SOD-923 ESD and Surge Protection (TVS/ESD) ROHS

Part id
onsemi/ESD9B3.3S
Category
ESD And Surge Protection (TVS, ESD)
Package
SOD-923
Pins
2
In stock
53,339 at JLCPCB (C96512)
Used on
10 open-source boards

Overview

The ESD9B3.3S is an ESD And Surge Protection made by onsemi in a SOD-923 package with 2 pins. -55℃~+150℃@(Tj) 1 10.5V、11.5V 100nA 15pF 2A 3.3V 7V Bidirectional ESD IEC 61000-4-2 SOD-923 ESD and Surge Protection (TVS/ESD) ROHS.

PCBKit's library has its KiCad symbol (Diode:ESD9B3.3ST5G, from KiCad's library) and its footprint (Diode_SMD:D_SOD-923, from KiCad's library), ready for a KiCad board. 53,339 are in stock at JLCPCB (part C96512). 10 open-source boards in 10 repositories on GitHub use it.

Symbol

Diode:ESD9B3.3ST5GFrom KiCad's library

Footprint

Diode_SMD:D_SOD-923From KiCad's library

Pinout

2
The pins of the ESD9B3.3S
PinNameType
1A1Passive
2A2Passive

Open-source boards using it

10See all 10
  • 4 layers47 × 21.6 mmRotini Hardware, the printed circuit board in 3D

    Rotini Hardware

    AlfredoSystems/Rotini-Hardware

    📖 Documentation: https://www.alfredosys.com/Rotini-Hardware/ (pinout, power limits, flashing ExpressLRS, first Arduino upload)

    116 parts3MIT
  • 4 layers50 × 50 mmESP32-C6-demoboard, the printed circuit board in 3D

    ESP32-C6-demoboard

    mortens-lab/ESP32-C6-demoboard

    KiCad files for ESP32-C6

    44 parts3
  • 4 layers40 × 40 mmESP32-S3-MINI, the printed circuit board in 3D

    ESP32-S3-MINI

    mortens-lab/ESP32-S3-MINI-TestBoard

    KiCad files

    44 parts3CC0-1.0
  • 4 layers42.1 × 72 mmFrakfurt eth, the printed circuit board in 3D

    Frakfurt eth

    grodansparadis/can4vscp-frankfurt-eth

    Frankfurt Ethernet to CAN4VSCP bridge

    71 parts2
  • 4 layers36 × 36 mmJRWatch, the printed circuit board in 3D

    JRWatch

    jadenrhee/JRWatch

    Low-power BLE wearable: nRF52840 module + nPM1300 PMIC + BMI270 IMU + Sharp MIP display. 36 mm 4-layer board, ~15 µA projected sleep current, Zephyr firmware.

    47 parts2
  • 4 layers50 × 50 mmESP32-C6, the printed circuit board in 3D

    ESP32-C6

    Batterhead221/esp32-c6_microcontroller

    custom esp32-c6 development board with rgb status led, user input, i2c expansion, oled support, and onboard environmental sensing.

    42 parts
  • 4 layers50 × 50 mmEsp32-c6-wroom, the printed circuit board in 3D

    Esp32-c6-wroom

    nabiKZ/esp32-c6-wroom

    esp32-c6-wroom

    42 parts
  • 2 layersPLACA, the printed circuit board in 3D

    PLACA

    patrickRJ20212304/Patrick-Richter-Microcontroladores-2025-C1

    28 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ESD9B3.3S?

Yes. The symbol is Diode:ESD9B3.3ST5G and the footprint Diode_SMD:D_SOD-923, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ESD9B3.3S?

SOD-923, with 2 pins. Its footprint is drawn on this page.

Where is the ESD9B3.3S datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the ESD9B3.3S?

JLCPCB lists it as part C96512, with 53,339 in stock; the sellers' links on this page open their listings.

What can replace the ESD9B3.3S?

Parts like it in the library: the ESD9L3.3S by onsemi, the ESD9B3.3ST5G-N by BORN, the ESD9B3.3ST5G-ES by ElecSuper and the ESD9B3.3ST5G by DOWO. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ESD9B3.3S?

10 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.