Skip to the content
12

1N4733A

onsemiExtended

-65℃~+200℃ 10uA@1V 1W 4.845V~5.355V 5.1V 550Ω 7Ω Independent DO-41 Zener Diodes ROHS

Part id
onsemi/1N4733A
Category
Zener Diodes
Package
DO-41
Pins
2
In stock
6,804 at JLCPCB (C140851)
Used on
30 open-source boards

Overview

The 1N4733A is a zener Diode made by onsemi in a DO-41 package with 2 pins. -65℃~+200℃ 10uA@1V 1W 4.845V~5.355V 5.1V 550Ω 7Ω Independent DO-41 Zener Diodes ROHS.

PCBKit's library has its KiCad symbol (Diode:1N47xxA, from KiCad's library) and its footprint (Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal, from KiCad's library), ready for a KiCad board. 6,804 are in stock at JLCPCB (part C140851). 30 open-source boards in 27 repositories on GitHub use it.

Symbol

Diode:1N47xxAFrom KiCad's library

Footprint

12
Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalFrom KiCad's library

Pinout

2
The pins of the 1N4733A
PinNameType
1KPassive
2APassive

Open-source boards using it

30See all 30
  • 2 layers96.8 × 97 mmPsoc5power, the printed circuit board in 3D

    Psoc5power

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    133 parts59
  • 2 layers100 × 100 mmController, the printed circuit board in 3D

    Controller

    profdc9/ModularTuner

    A Modular Antenna Tuner for a Phased Array Antenna System

    180 parts59
  • 2 layers148.8 × 132.2 mmUsbflashprog, the printed circuit board in 3D

    Usbflashprog

    robsonsmartins/usbflashprog

    A memory device programmer (Flash/EPROM/E2PROM) board and software, connected to PC by USB port.

    125 parts36
  • 2 layers91 × 186.5 mmDendy, the printed circuit board in 3D

    Dendy

    UzixLS/dendy

    Yet another Dendy (Famicom) clone - 8-bit home video game console

    141 parts19
  • 2 layers33.9 × 90 mmBiasPro InputProtection v3, the printed circuit board in 3D

    BiasPro InputProtection v3

    ToneAlchemy/BiasPro

    A professional-grade, dual-probe Arduino Bias Meter for guitar tube amplifiers. Open source hardware & firmware

    18 parts16MIT
  • 2 layers100 × 100 mmLinearPS, the printed circuit board in 3D

    LinearPS

    profdc9/LinearPS

    Linear constant constant/current constant voltage power supply PCB

    102 parts14
  • 2 layers141.9 × 100 mmTeensy MainPCB, the printed circuit board in 3D

    Teensy MainPCB

    Starsurfer78/TeensyMower-PCBs

    PCB's Folder for Teensy 4.1 based Robot Lawn Mower

    160 parts9GPL-3.0
  • 2 layers59.7 × 45.1 mmEGA2RGBC, the printed circuit board in 3D

    EGA2RGBC

    hkzlab/EGA-2-RGBS

    EPROM based EGA/CGA to analog RGBS converter

    27 parts7CC-BY-SA-4.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the 1N4733A?

Yes. The symbol is Diode:1N47xxA and the footprint Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the 1N4733A?

DO-41, with 2 pins. Its footprint is drawn on this page.

Where is the 1N4733A datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the 1N4733A?

JLCPCB lists it as part C140851, with 6,804 in stock; the sellers' links on this page open their listings.

What can replace the 1N4733A?

Parts like it in the library: the 1N4733A by LGE, the 1N4733ATR by onsemi, the 1N4733A by luJing and the 1N4733A-TR by Vishay Intertechnology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the 1N4733A?

30 boards in 27 repositories on GitHub; the most starred are listed on this page, with their KiCad files.