Skip to the content
12345678

TJA1029T

NXP SemiconductorsExtended

-40℃~+150℃ 1 1 175mV 5V~18V Thermal shutdown protection、Bus fault protection、Local wake-up、Bus wake-up、Low-power mode、TXD timeout protection、Under-voltage detection Transceiver SOIC-8 LIN Transceivers ROHS

Part id
nxp/TJA1029T
Category
LIN Transceivers
Package
SOIC-8
Pins
8
In stock
70 at JLCPCB (C132188)
Used on
6 open-source boards

Overview

The TJA1029T is a LIN Transceiver made by NXP Semiconductors in a SOIC-8 package with 8 pins. -40℃~+150℃ 1 1 175mV 5V~18V Thermal shutdown protection、Bus fault protection、Local wake-up、Bus wake-up、Low-power mode、TXD timeout protection、Under-voltage detection Transceiver SOIC-8 LIN Transceivers ROHS.

PCBKit's library has its KiCad symbol (Interface_CAN_LIN:TJA1029T, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 70 are in stock at JLCPCB (part C132188). 6 open-source boards in 5 repositories on GitHub use it.

Symbol

1RXD2SLP4TXD5GND6LIN7VBAT
Interface_CAN_LIN:TJA1029TFrom KiCad's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the TJA1029T
PinNameType
1RXDOpen collector
2SLPInput
3NCNot connected
4TXDInput
5GNDPower in
6LINInput/output
7VBATPower in
8NCNot connected

Open-source boards using it

6
  • 4 layers254.9 × 150.1 mmWomo, the printed circuit board in 3D

    Womo

    muccc/WomoLIN

    Open Source Steuerung von LIN Bus Geräten im Caravan Bereich.

    534 parts84GPL-3.0
  • 4 layers46 × 56 mmLINBoard HW, the printed circuit board in 3D

    LINBoard HW

    corygrant/LINBoard

    73 parts1
  • 2 layersTemalabor, the printed circuit board in 3D

    Temalabor

    domipapp/LIN-Driver-Linking

    27 parts
  • 2 layers55 × 80 mmFtdi quad lin, the printed circuit board in 3D

    Ftdi quad lin

    trnila/ftdi_quad_lin

    FTDI Quad-LIN is an FTDI-based board that enables communication with up to 4 LIN channels.

    157 parts
  • 2 layers70.3 × 38 mmJABICAN USB Pro, the printed circuit board in 3D

    JABICAN USB Pro

    dragonlock2/kicadboards

    Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere

    92 parts14Apache-2.0
  • 2 layers81 × 49 mmTemalabor, the printed circuit board in 3D

    Temalabor

    domipapp/LIN-Driver-Linking

    27 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TJA1029T?

Yes. The symbol is Interface_CAN_LIN:TJA1029T and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TJA1029T?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the TJA1029T datasheet?

NXP Semiconductors publishes it: the Datasheet link on this page opens it.

Where can I order the TJA1029T?

JLCPCB lists it as part C132188, with 70 in stock; the sellers' links on this page open their listings.

What can replace the TJA1029T?

Parts like it in the library: the TJA1021T/20/CM by NXP Semiconductors, the TJA1027T/20/1J by NXP Semiconductors, the TJA1020T/CM by NXP Semiconductors and the TJA1028T/5V0/20/1J by NXP Semiconductors. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TJA1029T?

6 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.