Skip to the content

NTS0102GT

NXP SemiconductorsExtended

-40℃~+125℃ 1 1.65V~3.6V 2 2.3V~5.5V 50Mbps Auto Direction Detection Bidirectional Tri-State XSON-8(1x2) Translators, Level Shifters ROHS

Part id
nxp/NTS0102GT
Category
Translators, Level Shifters
Package
XSON-8(1x2)
Pins
8
In stock
20 at JLCPCB (C2687851)
Used on
11 open-source boards

Overview

The NTS0102GT is a translators, Level Shifter made by NXP Semiconductors in a XSON-8(1x2) package with 8 pins. -40℃~+125℃ 1 1.65V~3.6V 2 2.3V~5.5V 50Mbps Auto Direction Detection Bidirectional Tri-State XSON-8(1x2) Translators, Level Shifters ROHS.

PCBKit's library has its KiCad symbol (NTS0102_XSON:NTS0102_XSON, from Antmicro) and its footprint (xson-8-1x1-95mm-p0-5mm:XSON-8_1x1.95mm_P0.5mm, from Antmicro), ready for a KiCad board. 20 are in stock at JLCPCB (part C2687851). 11 open-source boards in 9 repositories on GitHub use it.

Symbol

1B22GND3VCCA4A25A16OE7VCCB8B1
NTS0102_XSON:NTS0102_XSONFrom Antmicro

Footprint

xson-8-1x1-95mm-p0-5mm:XSON-8_1x1.95mm_P0.5mmFrom Antmicro

From the datasheet

11
Supply, least
1.65 V · VCC(A), recommended operating min · p. 5
Supply, most
3.6 V · VCC(A), recommended operating max · p. 5
Supply, least
2.3 V · VCC(B), recommended operating min · p. 5
Supply, most
5.5 V · VCC(B), recommended operating max · p. 5
Supply, absolute maximum
6.5 V · VCC(A), absolute max · p. 5
Works from
-40 °C · ambient temperature min · p. 5
Works up to
125 °C · ambient temperature max · p. 5
Takes working
4.7 µA · sum of ICC(A) and ICC(B), typical at VCC(A) = 1.8 V, VCC(B) = 5.0 V, 25 °C · p. 6
Takes at most
30 µA · sum of ICC(A) and ICC(B), max at -40 °C to +125 °C, VI = 0 V or VCCI, IO = 0 A · p. 8
A pin gives at most
50 mA · A or B output current absolute max, VO = 0 V to VCCO · p. 5
Data rate, most
50 Mbit/s · push-pull data rate max · p. 1

What it is and has

11
Translation
2-bit, dual supply, bidirectional, auto direction sensing · p. 1
Output architecture
open-drain · p. 1
Supply voltage range
VCC(A): 1.65 V to 3.6 V; VCC(B): 2.3 V to 5.5 V · p. 1
Maximum push-pull data rate
50 Mbit/s · p. 1
Partial power-down
IOFF circuitry · p. 1
Input voltage tolerance
up to 5.5 V · p. 1
ESD protection, A port
HBM JESD22-A114E Class 2 exceeds 2500 V · p. 1
ESD protection, B port
HBM JESD22-A114E Class 3B exceeds 8000 V · p. 1
ESD protection, CDM
JESD22-C101E exceeds 1500 V · p. 1
Latch-up performance
exceeds 100 mA per JESD 78B Class II · p. 1
Temperature ranges
–40 °C to +85 °C and -40 °C to +125 °C · p. 1

Specifications

138
ParameterConditionsAs printedPage
supply voltage A VCC(A)Voltages referenced to GNDmin -0.5 · max 6.5 V5
supply voltage B VCC(B)Voltages referenced to GNDmin -0.5 · max 6.5 V5
input voltage VIA port and OE inputmin -0.5 · max 6.5 V5
input voltage VIB portmin -0.5 · max 6.5 V5
output voltage VOActive mode; A or B port; VCCO is the supply voltage associated with the outputmin -0.5 V5
output voltage VOPower-down or 3-state mode; A portmin -0.5 · max 4.6 V5
output voltage VOPower-down or 3-state mode; B portmin -0.5 · max 6.5 V5
input clamping current IIKVI < 0 Vmin -50 mA5
output clamping current IOKVO < 0 Vmin -50 mA5
supply current ICCICC(A) or ICC(B)max 100 mA5
ground current IGNDmin -100 mA5
storage temperature Tstgmin -65 · max 150 °C5
total power dissipation PtotTamb = -40 °C to +125 °C; XSON8: above 118 °C, derates linearly with 7.8 mW/Kmax 250 mW5
supply voltage A VCC(A)VCC(A) must be less than or equal to VCC(B)min 1.65 · max 3.6 V5
supply voltage B VCC(B)VCC(A) must be less than or equal to VCC(B)min 2.3 · max 5.5 V5
ambient temperature Tambmin -40 · max 125 °C5
input transition rise and fall rate Δt/ΔVA or B port; push-pull driving; VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 Vmax 10 ns/V5
input transition rise and fall rate Δt/ΔVOE input; VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 Vmax 10 ns/V5
input capacitance CITamb = 25 °C; OE input; VCC(A) = 3.3 V; VCC(B) = 3.3 Vtyp 1 pF6
input/output capacitance CI/OTamb = 25 °C; A porttyp 5 pF6
input/output capacitance CI/OTamb = 25 °C; B porttyp 8.5 pF6
input/output capacitance CI/OTamb = 25 °C; A or B port; VCC(A) = 3.3 V; VCC(B) = 3.3 Vtyp 11 pF6
supply current ICC(A)Tamb = 25 °C; VCC(A) = 1.8 V; VCC(B) = 2.5 Vtyp 0.1 uA6
supply current ICC(A)Tamb = 25 °C; VCC(A) = 1.8 V; VCC(B) = 3.3 Vtyp 0.1 uA6
supply current ICC(A)Tamb = 25 °C; VCC(A) = 1.8 V; VCC(B) = 5.0 Vtyp 0.1 uA6
supply current ICC(A)Tamb = 25 °C; VCC(A) = 2.5 V; VCC(B) = 2.5 Vtyp 0.1 uA6
supply current ICC(A)Tamb = 25 °C; VCC(A) = 2.5 V; VCC(B) = 3.3 Vtyp 0.1 uA6
supply current ICC(A)Tamb = 25 °C; VCC(A) = 2.5 V; VCC(B) = 5.0 Vtyp 0.1 uA6
supply current ICC(A)Tamb = 25 °C; VCC(A) = 3.3 V; VCC(B) = 3.3 Vtyp 0.1 uA6
supply current ICC(A)Tamb = 25 °C; VCC(A) = 3.3 V; VCC(B) = 5.0 Vtyp 0.1 uA6
LOW-level input voltage VIL-40 °C to +85 °C; A or B port; VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 Vmax 0.15 V7
LOW-level input voltage VIL-40 °C to +125 °C; A or B port; VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 Vmax 0.15 V7
LOW-level output voltage VOL-40 °C to +85 °C; A or B port; IO = 1 mA; VI ≤ 0.15 V; VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 Vmax 0.4 V7
LOW-level output voltage VOL-40 °C to +125 °C; A or B port; IO = 1 mA; VI ≤ 0.15 V; VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 Vmax 0.4 V7
supply current ICC-40 °C to +85 °C; ICC(A); VI = 0 V or VCCI; IO = 0 A; VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 Vmax 2.4 uA7
supply current ICC-40 °C to +125 °C; ICC(A); VI = 0 V or VCCI; IO = 0 A; VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 Vmax 15 uA7
supply current ICC-40 °C to +85 °C; ICC(A); VI = 0 V or VCCI; IO = 0 A; VCC(A) = 3.6 V; VCC(B) = 0 Vmax 2.2 uA7
supply current ICC-40 °C to +125 °C; ICC(A); VI = 0 V or VCCI; IO = 0 A; VCC(A) = 3.6 V; VCC(B) = 0 Vmax 15 uA7
supply current ICC-40 °C to +85 °C; ICC(A); VI = 0 V or VCCI; IO = 0 A; VCC(A) = 0 V; VCC(B) = 5.5 Vmax -1 uA7
supply current ICC-40 °C to +125 °C; ICC(A); VI = 0 V or VCCI; IO = 0 A; VCC(A) = 0 V; VCC(B) = 5.5 Vmax -8 uA7
supply current ICC-40 °C to +85 °C; ICC(B); VI = 0 V or VCCI; IO = 0 A; VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 Vmax 12 uA7
supply current ICC-40 °C to +125 °C; ICC(B); VI = 0 V or VCCI; IO = 0 A; VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 Vmax 30 uA7
supply current ICC-40 °C to +85 °C; ICC(B); VI = 0 V or VCCI; IO = 0 A; VCC(A) = 3.6 V; VCC(B) = 0 Vmax -1 uA7
supply current ICC-40 °C to +125 °C; ICC(B); VI = 0 V or VCCI; IO = 0 A; VCC(A) = 3.6 V; VCC(B) = 0 Vmax -5 uA7
supply current ICC-40 °C to +85 °C; ICC(B); VI = 0 V or VCCI; IO = 0 A; VCC(A) = 0 V; VCC(B) = 5.5 Vmax 1 uA7
supply current ICC-40 °C to +125 °C; ICC(B); VI = 0 V or VCCI; IO = 0 A; VCC(A) = 0 V; VCC(B) = 5.5 Vmax 6 uA7
supply current ICC-40 °C to +85 °C; ICC(A) + ICC(B); VI = 0 V or VCCI; IO = 0 A; VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 Vmax 14.4 uA8
supply current ICC-40 °C to +125 °C; ICC(A) + ICC(B); VI = 0 V or VCCI; IO = 0 A; VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 Vmax 30 uA8
HIGH to LOW propagation delay tPHLA to B; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 2.5 V ± 0.2 Vmax 4.6 ns8
HIGH to LOW propagation delay tPHLA to B; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 3.3 V ± 0.3 Vmax 4.7 ns8
HIGH to LOW propagation delay tPHLA to B; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 5.0 V ± 0.5 Vmax 5.8 ns8
LOW to HIGH propagation delay tPLHA to B; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 2.5 V ± 0.2 Vmax 6.8 ns8
LOW to HIGH propagation delay tPLHA to B; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 3.3 V ± 0.3 Vmax 6.8 ns8
LOW to HIGH propagation delay tPLHA to B; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 5.0 V ± 0.5 Vmax 7 ns8
HIGH to LOW propagation delay tPHLB to A; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 2.5 V ± 0.2 Vmax 4.4 ns8
HIGH to LOW propagation delay tPHLB to A; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 3.3 V ± 0.3 Vmax 4.5 ns8
HIGH to LOW propagation delay tPHLB to A; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 5.0 V ± 0.5 Vmax 4.7 ns8
LOW to HIGH propagation delay tPLHB to A; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 2.5 V ± 0.2 Vmax 5.3 ns8
LOW to HIGH propagation delay tPLHB to A; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 3.3 V ± 0.3 Vmax 4.5 ns8
LOW to HIGH propagation delay tPLHB to A; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 5.0 V ± 0.5 Vmax 0.5 ns8
enable time tenOE to A; B; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 2.5 V ± 0.2 Vmax 200 ns8
enable time tenOE to A; B; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 3.3 V ± 0.3 Vmax 200 ns8
enable time tenOE to A; B; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 5.0 V ± 0.5 Vmax 200 ns8
disable time tdisOE to A; no external load; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 2.5 V ± 0.2 Vmax 25 ns8
disable time tdisOE to A; no external load; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 3.3 V ± 0.3 Vmax 25 ns8
disable time tdisOE to A; no external load; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 5.0 V ± 0.5 Vmax 25 ns8
disable time tdisOE to B; no external load; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 2.5 V ± 0.2 Vmax 25 ns8
disable time tdisOE to B; no external load; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 3.3 V ± 0.3 Vmax 25 ns8
disable time tdisOE to B; no external load; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 5.0 V ± 0.5 Vmax 25 ns8
disable time tdisOE to A; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 2.5 V ± 0.2 Vmax 230 ns8
disable time tdisOE to A; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 3.3 V ± 0.3 Vmax 230 ns8
disable time tdisOE to A; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 5.0 V ± 0.5 Vmax 230 ns8
disable time tdisOE to B; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 2.5 V ± 0.2 Vmax 200 ns8
disable time tdisOE to B; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 3.3 V ± 0.3 Vmax 200 ns8
disable time tdisOE to B; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 5.0 V ± 0.5 Vmax 200 ns8
LOW to HIGH output transition time tTLHA port; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 2.5 V ± 0.2 Vmin 3.2 · max 9.5 ns8
LOW to HIGH output transition time tTLHA port; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 3.3 V ± 0.3 Vmin 2.3 · max 9.3 ns8
LOW to HIGH output transition time tTLHA port; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 5.0 V ± 0.5 Vmin 1.8 · max 7.6 ns8
LOW to HIGH output transition time tTLHB port; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 2.5 V ± 0.2 Vmin 3.3 · max 10.8 ns8
LOW to HIGH output transition time tTLHB port; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 3.3 V ± 0.3 Vmin 2.7 · max 9.1 ns8
LOW to HIGH output transition time tTLHB port; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 5.0 V ± 0.5 Vmin 2.7 · max 7.6 ns8
HIGH to LOW output transition time tTHLA port; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 2.5 V ± 0.2 Vmin 2 · max 5.9 ns8
HIGH to LOW output transition time tTHLA port; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 3.3 V ± 0.3 Vmin 1.9 · max 6 ns8
HIGH to LOW output transition time tTHLA port; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 5.0 V ± 0.5 Vmin 1.7 · max 13.3 ns8
HIGH to LOW output transition time tTHLB port; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 2.5 V ± 0.2 Vmin 2.9 · max 7.6 ns8
HIGH to LOW output transition time tTHLB port; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 3.3 V ± 0.3 Vmin 2.8 · max 7.5 ns8
HIGH to LOW output transition time tTHLB port; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 5.0 V ± 0.5 Vmin 2.8 · max 10 ns8
output skew time tsk(o)between channels; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 2.5 V ± 0.2 Vmax 0.7 ns8
output skew time tsk(o)between channels; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 3.3 V ± 0.3 Vmax 0.7 ns8
output skew time tsk(o)between channels; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 5.0 V ± 0.5 Vmax 0.7 ns8
pulse width tWdata inputs; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 2.5 V ± 0.2 Vmin 20 ns8
pulse width tWdata inputs; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 3.3 V ± 0.3 Vmin 20 ns8
pulse width tWdata inputs; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 5.0 V ± 0.5 Vmin 20 ns8
data rate fdataVCC(A) = 1.8 V ± 0.15 V; VCC(B) = 2.5 V ± 0.2 Vmax 50 Mbit/s8
data rate fdataVCC(A) = 1.8 V ± 0.15 V; VCC(B) = 3.3 V ± 0.3 Vmax 50 Mbit/s8
data rate fdataVCC(A) = 1.8 V ± 0.15 V; VCC(B) = 5.0 V ± 0.5 Vmax 50 Mbit/s8
HIGH to LOW propagation delay tPHLA to B; VCC(A) = 2.5 V ± 0.2 V; VCC(B) = 2.5 V ± 0.2 Vmax 3.2 ns8
HIGH to LOW propagation delay tPHLA to B; VCC(A) = 2.5 V ± 0.2 V; VCC(B) = 3.3 V ± 0.3 Vmax 3.3 ns8
HIGH to LOW propagation delay tPHLA to B; VCC(A) = 2.5 V ± 0.2 V; VCC(B) = 5.0 V ± 0.5 Vmax 3.4 ns8
HIGH to LOW propagation delay tPHLA to B; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 2.5 V ± 0.2 Vmax 5.8 ns10
HIGH to LOW propagation delay tPHLA to B; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 3.3 V ± 0.3 Vmax 5.9 ns10
HIGH to LOW propagation delay tPHLA to B; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 5.0 V ± 0.5 Vmax 7.3 ns10
LOW to HIGH propagation delay tPLHA to B; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 2.5 V ± 0.2 Vmax 8.5 ns10
LOW to HIGH propagation delay tPLHA to B; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 3.3 V ± 0.3 Vmax 8.5 ns10
LOW to HIGH propagation delay tPLHA to B; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 5.0 V ± 0.5 Vmax 8.8 ns10
HIGH to LOW propagation delay tPHLB to A; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 2.5 V ± 0.2 Vmax 5.5 ns10
HIGH to LOW propagation delay tPHLB to A; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 3.3 V ± 0.3 Vmax 5.7 ns10
HIGH to LOW propagation delay tPHLB to A; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 5.0 V ± 0.5 Vmax 5.9 ns10
LOW to HIGH propagation delay tPLHB to A; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 2.5 V ± 0.2 Vmax 6.7 ns10
LOW to HIGH propagation delay tPLHB to A; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 3.3 V ± 0.3 Vmax 5.7 ns10
LOW to HIGH propagation delay tPLHB to A; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 5.0 V ± 0.5 Vmax 0.7 ns10
disable time tdisOE to A; no external load; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 2.5 V ± 0.2 Vmax 30 ns10
disable time tdisOE to A; no external load; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 3.3 V ± 0.3 Vmax 30 ns10
disable time tdisOE to A; no external load; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 5.0 V ± 0.5 Vmax 30 ns10
disable time tdisOE to B; no external load; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 2.5 V ± 0.2 Vmax 30 ns10
disable time tdisOE to B; no external load; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 3.3 V ± 0.3 Vmax 30 ns10
disable time tdisOE to B; no external load; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 5.0 V ± 0.5 Vmax 30 ns10
disable time tdisOE to A; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 2.5 V ± 0.2 Vmax 250 ns10
disable time tdisOE to A; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 3.3 V ± 0.3 Vmax 250 ns10
disable time tdisOE to A; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 5.0 V ± 0.5 Vmax 250 ns10
disable time tdisOE to B; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 2.5 V ± 0.2 Vmax 220 ns10
disable time tdisOE to B; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 3.3 V ± 0.3 Vmax 220 ns10
disable time tdisOE to B; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 5.0 V ± 0.5 Vmax 220 ns10
LOW to HIGH output transition time tTLHA port; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 2.5 V ± 0.2 Vmin 3.2 · max 11.9 ns10
LOW to HIGH output transition time tTLHA port; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 3.3 V ± 0.3 Vmin 2.3 · max 11.7 ns10
LOW to HIGH output transition time tTLHA port; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 5.0 V ± 0.5 Vmin 1.8 · max 9.5 ns10
LOW to HIGH output transition time tTLHB port; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 2.5 V ± 0.2 Vmin 3.3 · max 13.5 ns10
LOW to HIGH output transition time tTLHB port; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 3.3 V ± 0.3 Vmin 2.7 · max 11.4 ns10
LOW to HIGH output transition time tTLHB port; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 5.0 V ± 0.5 Vmin 2.7 · max 9.5 ns10
HIGH to LOW output transition time tTHLA port; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 2.5 V ± 0.2 Vmin 2 · max 7.4 ns10
HIGH to LOW output transition time tTHLA port; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 3.3 V ± 0.3 Vmin 1.9 · max 7.5 ns10
HIGH to LOW output transition time tTHLA port; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 5.0 V ± 0.5 Vmin 1.7 · max 16.7 ns10
HIGH to LOW output transition time tTHLB port; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 2.5 V ± 0.2 Vmin 2.9 · max 9.5 ns10
HIGH to LOW output transition time tTHLB port; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 3.3 V ± 0.3 Vmin 2.8 · max 9.4 ns10
HIGH to LOW output transition time tTHLB port; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 5.0 V ± 0.5 Vmin 2.8 · max 12.5 ns10
output skew time tsk(o)between channels; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 2.5 V ± 0.2 Vmax 0.8 ns10
output skew time tsk(o)between channels; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 3.3 V ± 0.3 Vmax 0.8 ns10
output skew time tsk(o)between channels; VCC(A) = 1.8 V ± 0.15 V; VCC(B) = 5.0 V ± 0.5 Vmax 0.8 ns10

Pins, by the datasheet

8
1 B2
Data input or output referenced to VCC(B). · p. 4
2 GND
Ground (0 V). · p. 4
3 VCC(A)
Supply voltage A. · p. 4
4 A2
Data input or output referenced to VCC(A). · p. 4
5 A1
Data input or output referenced to VCC(A). · p. 4
6 OE
Output enable input, active HIGH, referenced to VCC(A). · p. 4
7 VCC(B)
Supply voltage B. · p. 4
8 B1
Data input or output referenced to VCC(B). · p. 4

Ordering codes, by the datasheet

1
NTS0102GT,115
XSON8 · SOT833-1; body 1 × 1.95 × 0.5 mm; Reel 7" Q1 NDP; minimum order quantity 5000; –40 °C to +125 °C · p. 2

Open-source boards using it

11See all 11
  • 8 layers120 × 60 mmJetson orin baseboard, the printed circuit board in 3D

    Jetson orin baseboard

    antmicro/jetson-orin-baseboard

    Baseboard targetting the NVIDIA Jetson Orin Nano and Jetson Orin NX

    681 parts305Apache-2.0
  • 6 layers100 × 70 mmSa800u baseboard hw, the printed circuit board in 3D

    Sa800u baseboard hw

    antmicro/snapdragon-845-baseboard

    https://antmicro.com/blog/2022/04/open-source-snapdragon-845-baseboard/

    616 parts70Apache-2.0
  • 10 layers180 × 100 mmJetson agx thor baseboard, the printed circuit board in 3D

    Jetson agx thor baseboard

    antmicro/jetson-agx-thor-baseboard

    Open hardware baseboard for Nvidia Jetson Thor AGX T5000 System on Module

    1,213 parts48Apache-2.0
  • 14 layers55 × 40 mmPolarfire som, the printed circuit board in 3D

    Polarfire som

    antmicro/polarfire-som

    System on Module based on Microchip PolarFire MPFS250T SoC

    473 parts48Apache-2.0
  • 2 layers66.2 × 57.3 mmFidget, the printed circuit board in 3D

    Fidget

    m-byte/fidget-pov

    https://hackaday.io/project/25372-iot-pov-fidget-spinner

    88 parts8GPL-3.0
  • 6 layers111 × 111 mmLed panel, the printed circuit board in 3D

    Led panel

    antmicro/programmable-led-panel

    LED matrix controlled with iCE40 FPGA or RP2040 MCU for benchmarking and integration of video systems

    315 parts2Apache-2.0
  • 2 layers189.6 × 31.8 mmArm interface board panel, the printed circuit board in 3D

    Arm interface board panel

    Roboy/Arm_interface_board

    Board containing all the control units and power distribution for the servos in the arms.

    129 parts1

Parts like it

3

Questions

Is there a KiCad symbol and footprint for the NTS0102GT?

Yes. The symbol is NTS0102_XSON:NTS0102_XSON and the footprint xson-8-1x1-95mm-p0-5mm:XSON-8_1x1.95mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the NTS0102GT?

XSON-8(1x2), with 8 pins. Its footprint is drawn on this page.

Where is the NTS0102GT datasheet?

NXP Semiconductors publishes it: the Datasheet link on this page opens it.

Where can I order the NTS0102GT?

JLCPCB lists it as part C2687851, with 20 in stock; the sellers' links on this page open their listings.

What can replace the NTS0102GT?

Parts like it in the library: the 74LVC2T45GT by Nexperia, the NTB0102GT by NXP Semiconductors and the 74LVC2T45GT-Q100X by Nexperia. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the NTS0102GT?

11 boards in 9 repositories on GitHub; the most starred are listed on this page, with their KiCad files.