
Vhf uhf IQ Modulator
antonjan/IQ_Modulator
IQ Modulator for 2M and 70cm from I2C and ALSA PCM Audio on Orange PI Zero (Estimated TX Power 500mW)
NXP SemiconductorsExtended
108mA 130MHz~1GHz 30.5dB 32.8dBm 3V~5V 43dBm Built-in power detector、Linearization design、Bias control circuit QFN-12-EP(3x3) RF Amplifiers ROHS
The MMZ09332BT1 is a RF Amplifier made by NXP Semiconductors in a QFN-12-EP(3x3) package with 13 pins. 108mA 130MHz~1GHz 30.5dB 32.8dBm 3V~5V 43dBm Built-in power detector、Linearization design、Bias control circuit QFN-12-EP(3x3) RF Amplifiers ROHS.
PCBKit's library has its KiCad symbol (RF_Amplifier:MMZ09332BT1, from KiCad's library) and its footprint (Package_DFN_QFN:QFN-12-1EP_3x3mm_P0.5mm_EP1.6x1.6mm, from KiCad's library), ready for a KiCad board. 10 are in stock at JLCPCB (part C2151426). 4 open-source boards in 3 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | VBA1 | Input |
| 2 | VBIAS | Power in |
| 3 | RF_IN | Input |
| 4 | NC | Not connected |
| 5 | NC | Not connected |
| 6 | PDET | Output |
| 7 | VCC2/RFOUT | Input |
| 8 | VCC2/RFOUT | Input |
| 9 | VCC2/RFOUT | Input |
| 10 | POWER_DOWN | Input |
| 11 | VCC1 | Power in |
| 12 | VBA2 | Input |
| 13 | GND | Power in |

antonjan/IQ_Modulator
IQ Modulator for 2M and 70cm from I2C and ALSA PCM Audio on Orange PI Zero (Estimated TX Power 500mW)



antonjan/IQ_Modulator
IQ Modulator for 2M and 70cm from I2C and ALSA PCM Audio on Orange PI Zero (Estimated TX Power 500mW)
Yes. The symbol is RF_Amplifier:MMZ09332BT1 and the footprint Package_DFN_QFN:QFN-12-1EP_3x3mm_P0.5mm_EP1.6x1.6mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
QFN-12-EP(3x3), with 13 pins. Its footprint is drawn on this page.
NXP Semiconductors publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C2151426, with 10 in stock; the sellers' links on this page open their listings.
4 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.