Skip to the content
PCBKitNew board
MT6701CT-STD-R on a board, in 3D

MT6701CT-STD-R

NOVOSENSE

-40℃~+125℃ 0°~360° 1.75mm 10mA 3.3V~5V 3.9mm 5mm I2C、SSI Magnetic rotary position sensor No Programmable transmission、Zero position programming、Fault diagnosis SOP-8 Position Sensors ROHS

Extended
DatasheetJLCPCBLCSCnovosense/MT6701CT-STD-R
Category
Position Sensors
Package
SOP-8
Pins
8

Overview

The MT6701CT-STD-R is a position Sensor made by NOVOSENSE in a SOP-8 package with 8 pins. -40℃~+125℃ 0°~360° 1.75mm 10mA 3.3V~5V 3.9mm 5mm I2C、SSI Magnetic rotary position sensor No Programmable transmission、Zero position programming、Fault diagnosis SOP-8 Position Sensors ROHS.

PCBKit's library has its KiCad symbol (Sensor_Magnetic:MT6701CT, from KiCad's library) and its footprint (Package_SO:SO-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 1,852 are in stock at JLCPCB (part C3003196). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

VDD1MODE2OUT3GND4PUSH5A6B7Z8
Sensor_Magnetic:MT6701CTFrom KiCad's library

Footprint

12345678
Package_SO:SO-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Parameters

11
Current - Supply
10mA
Features
Fault diagnosis
Height
1.75mm
Interface
SSI
Length
5mm
Module
No
Operating Temperature
-40℃~+125℃
Rotation Angle
0°~360°
Type
Magnetic rotary position sensor
Voltage - Supply
3.3V~5V
Width
3.9mm

Order codes

1

Pinout

8
The pins of the MT6701CT-STD-R
PinNameType
1VDDPower in
2MODEInput
3OUTOutput
4GNDPower in
5PUSHOutput
6AOutput
7BOutput
8ZOutput

Open-source boards using it

All 3
  • 4 layers56.4 × 56.4 mmNema23Driver, the printed circuit board in 3D

    Nema23Driver

    neatstranger/Dagerro

    Open Source Astrophotography Hardware and Software

    60 parts3
  • 2 layers42 × 15 mmThrottle Module, the printed circuit board in 3D

    Throttle Module

    ninemind/aeromax-throttle-module

    Unofficial, open-source DIY throttle module for the VIRPIL CDT-AEROMAX, with 3D-printable parts, KiCad PCB files, and assembly documentation.

    7 parts3CERN-OHL-S-2.0
  • 4 layers100 × 100 mmAmod b, the printed circuit board in 3D

    Amod b

    gallicchio/AMOD-and-RFMOD

    The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…

    147 parts

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/novosense/MT6701CT-STD-R" title="MT6701CT-STD-R in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/novosense/MT6701CT-STD-R.jpg" alt="MT6701CT-STD-R" width="1200" height="900">
A picture that opens the part, for a README
[![MT6701CT-STD-R](https://pcbkit.io/embed/parts/novosense/MT6701CT-STD-R.jpg?size=s)](https://pcbkit.io/parts/novosense/MT6701CT-STD-R)

Questions

Is there a KiCad symbol and footprint for the MT6701CT-STD-R?

Yes. The symbol is Sensor_Magnetic:MT6701CT and the footprint Package_SO:SO-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MT6701CT-STD-R?

SOP-8, with 8 pins. Its footprint is drawn on this page.

Where is the MT6701CT-STD-R datasheet?

NOVOSENSE publishes it: the Datasheet link on this page opens it.

Where can I order the MT6701CT-STD-R?

JLCPCB lists it as part C3003196, with 1,852 in stock; the sellers' links on this page open their listings.

What can replace the MT6701CT-STD-R?

Parts like it in the library: the MT6701CT-ACD-R by NOVOSENSE, the MT6816CT-ACD-R by NOVOSENSE, the MT6701CT-STD by NOVOSENSE and the MT6701CT-AKD-R by NOVOSENSE. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MT6701CT-STD-R?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8