4 layers252 × 152 mm
CTA control board
PySpice-org/eda-rw
Python library to read/write KiCad and LibrePCB Sexpr file format
619 parts9
BCP53
NexperiaExtended
-65℃~+150℃ 1 PNP 100nA 145MHz 1A 500mV 5V 63 650mW 80V PNP SOT-223 Bipolar (BJT) ROHS
- Part id
- nexperia/BCP53
- Category
- Bipolar (BJT)
- Package
- SOT-223
- Pins
- 4
- In stock
- 65,352 at JLCPCB (C18737)
- Used on
- 8 open-source boards
Overview
The BCP53 is a bipolar made by Nexperia in a SOT-223 package with 4 pins. -65℃~+150℃ 1 PNP 100nA 145MHz 1A 500mV 5V 63 650mW 80V PNP SOT-223 Bipolar (BJT) ROHS.
PCBKit's library has its KiCad symbol (Transistor_BJT:BCP53, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-223, from KiCad's library), ready for a KiCad board. 65,352 are in stock at JLCPCB (part C18737). 8 open-source boards in 6 repositories on GitHub use it.
Symbol
Footprint
Pinout
4| Pin | Name | Type |
|---|---|---|
| 1 | B | Input |
| 2 | C | Passive |
| 3 | E | Passive |
| 4 | C | Passive |
Open-source boards using it
8- 2 layers46.4 × 20.3 mm
Wifi lamp
damianmoore/wifi-lamp
A simple wifi-enabled lamp control board based on the ESP8266
9 parts1GPL-3.0 - 2 layers199.4 × 97.8 mm
Brew HW stm8s207
Emile666/Brew_Hardware_STM8S207
Brewing hardware with STM8S207, Kicad project
188 parts - 2 layers60 × 90 mm
Palemka
kardTaczka/easter_pcb
For soldering learning. 15 leds connected to breathing 555. Frequency around 0.2 Hz for smooth breathing-like behaviour.
86 parts - 2 layers250 × 195 mm
- 2 layers302.9 × 134.3 mm
- 2 layers175 × 103 mm
- 2 layers275 × 110 mm
Parts like it
8
BCP56
SOT-223-55℃~+150℃ 1 NPN 1.5W 100MHz 100nA 1A 250 500mV 5V 80V NPN SOT-223 Bipolar (BJT) ROHSHXY MOSFETBipolar (BJT)BCP53-16
SOT-223-55℃~+150℃ 1 PNP 1.35W 10uA 145MHz 1A 500mV 5V 63 80V PNP SOT-223 Bipolar (BJT) ROHSNexperiaBipolar (BJT)BCP56-16,115
SOT-223-55℃~+150℃ 1 NPN 1.35W 100nA 180MHz 1A 500mV 5V 63 80V NPN SOT-223 Bipolar (BJT) ROHSNexperiaBipolar (BJT)BCP53-16
SOT-223-65℃~+150℃ 1 PNP 1.5W 100 100MHz 100nA 1A 500mV 5V 80V PNP SOT-223 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)BCP56
SOT-2231 NPN 1.5W 100 100MHz 100nA 1A 500mV 5V 80V NPN SOT-223 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)PBSS4350Z
SOT-223-65℃~+150℃ 1 NPN 100 100MHz 100nA 290mV 2W 3A 50V 6V NPN SOT-223 Bipolar (BJT) ROHSNexperiaBipolar (BJT)PBSS5350Z
SOT-223-65℃~+150℃ 1 PNP 1.35W 100MHz 100mV 200 3A 50V 50uA 6V PNP SOT-223 Bipolar (BJT) ROHSNexperiaBipolar (BJT)2STN1550
SOT-223-65℃~+150℃ 1 NPN 1.6W 100nA 450mV 50V 5A 5V 95 NPN SOT-223 Bipolar (BJT) ROHSSTMicroelectronicsBipolar (BJT)
Questions
Is there a KiCad symbol and footprint for the BCP53?
Yes. The symbol is Transistor_BJT:BCP53 and the footprint Package_TO_SOT_SMD:SOT-223, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the BCP53?
SOT-223, with 4 pins. Its footprint is drawn on this page.
Where is the BCP53 datasheet?
Nexperia publishes it: the Datasheet link on this page opens it.
Where can I order the BCP53?
JLCPCB lists it as part C18737, with 65,352 in stock; the sellers' links on this page open their listings.
What can replace the BCP53?
Parts like it in the library: the BCP56 by HXY MOSFET, the BCP53-16 by Nexperia, the BCP56-16,115 by Nexperia and the BCP53-16 by Jiangsu Changjing Electronics Technology (CJ). Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the BCP53?
8 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.