Skip to the content
2 layers199.4 × 97.8 mmBrew HW stm8s207, the printed circuit board in 3D

Brewing hardware with STM8S207, Kicad project

Size
199.4 × 97.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
188
Nets
143
Pads
613
Tracks, vias
1,577, 240
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
16 Aug 2026
Updated
27 Sep 2026

Overview

Brew HW stm8s207 is an open-source printed circuit board by Emile666, from the Emile666/Brew_Hardware_STM8S207 repository on GitHub. It is a 2-layer board of 199.4 × 97.8 mm with 188 parts on 143 nets, routed with 1,577 tracks and 240 vias.

It is built around the STM8S207R8T6, DS2482-800 and LM7805, with the LD1117V33, LM393 and TD62783AD among its other parts. Its parts include 52 resistors, 44 capacitors, 30 connectors, 10 ICs and 9 diodes. It belongs with the STM8 boards of this library.

Main components

10

README

README.md

Brew Automation Hardware with a STM8S207

This PCB is an evolution of what originally was an Arduino with some added hardware. The current PCB features an STM8S207R8, which comes in a 64 pins LQPF package. It has a maximum of 52 GPIO pins, contains 64K Flash, 1536 bytes EEPROM and 6 KB of RAM. Previous PCB versions were made with Eagle, starting with V4.12, KiCad is used.

PCB Layout
PCB Layout

Features

The current PCB and firmware have the following features:

  • Reading of 6 x temperature sensors: two in the HLT (one I2C LM92, one One-Wire DS18B20), one in the MLT (I2C), one in the boil-kettle (One-Wire), one at the output of the counterflow-chiller (One-Wire) and one at the MLT return-manifold (One-Wire).
  • Reading of one hardware temperature by a LM35 temperature sensor: this is used to protect the Solid State Relays (SSR) from overheating. The LM35 is typically mounted to a heatsink of one of the SSRs that switch a heating-element.
  • Reading a maximum of 4 x FS300A flowsensors: between HLT and MLT, between MLT and boil-kettle, one at the output of the counterflow-chiller and one at the entry of the MLT return-manifold.
  • Control of 8 x solenoid ball-valves at 24 V DC.
  • 2 x PWM signals (25 kHz, 28 V DC) for the modulating gasburners (HLT and boil-kettle burners).
  • Control of 4 x SSR outputs at 230 V AC: the pump, a second pump (for the HLT counterflow-chiller), 230 V enable for the HLT gasburner and 230 V enable for the boil-kettle gasburner.
  • Control of 6 x SSR outputs at 230 V AC for the three phase heating-elements in the HLT and the boil-kettle. With this, heating of the HLT is possible with a gas-burner, with 1, 2 or 3 heating-elements of with any combination of these.
  • Synced SSR outputs for HLT and boil-kettle, so that you only need one three-phase connection. The boil-kettle outputs have priority over the HLT outputs, meaning that if (on any phase of 230 V) both HLT and boil-kettle are heating, only the boil-kettle is activated. It is also possible to use just one (or two) of the three-phases, depending on the number of heating-elements inside the HLT and/or boil-kettle. The firmware is capable of addressing one, two or three heating-elements per kettle.
  • Ethernet and USB connection to PC: USB-connection is used for debugging, main connection between PC-program and the firmware is Ethernet.
  • Frontpanel LEDs (24 in total) that show the status of all actuators. They are controlled by a MAX7219 LED Display Driver, located on a separate PCB, the frontpanel PCB.

Schematics (.pdf)

Brew Hardware schematics
Brew Hardware Schematics

Interactive Bill-of-Materials (BOM)

Brew Hardware BOM
Brew Hardware BOM

Parts

188
QtyValueFootprintReferences
22100nCapacitor_SMD:C_1206_3216MetricC10, C11, C17, C19, C21, C24, C25, C27, C29, C31, C33, C34, C37, C44, C45, C46 +6
1310uCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC3, C13, C14, C16, C18, C22, C23, C30, C35, C36, C38, C39, C49
12330RResistor_SMD:R_1206_3216MetricR4, R5, R6, R17, R31, R34, R43, R57, R58, R59, R64, R65
80.5AResistor_THT:R_Box_L8.4mm_W2.5mm_P5.08mmTH1, TH2, TH3, TH4, TH5, TH6, TH7, TH8
8G5V1-24Relay_THT:Relay_SPDT_Omron_G5V-1K1, K2, K3, K4, K5, K6, K7, K8
710KResistor_SMD:R_1206_3216MetricR1, R2, R11, R19, R21, R36, R39
710RResistor_SMD:R_1206_3216MetricR3, R29, R30, R32, R45, R46, R51
61000uCapacitor_THT:CP_Radial_D12.5mm_P5.00mmC1, C2, C4, C12, C15, C28
63K3Resistor_SMD:R_1206_3216MetricR10, R13, R14, R40, R41, R42
64K7Resistor_SMD:R_1206_3216MetricR26, R47, R48, R49, R50, R52
5BlueLED_SMD:LED_1206_3216MetricD1, D2, D5, D6, D7
4DS2482Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU5, U6, U7, U8
4MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
3FLOWLibrary_Emile:PS2-MINI-DIN6J15, J16, J17
21K8Resistor_SMD:R_1206_3216MetricR27, R53
220pCapacitor_SMD:C_1206_3216MetricC52, C53
227KResistor_SMD:R_1206_3216MetricR8, R15
233KResistor_SMD:R_1206_3216MetricR28, R33
2BCP53Package_TO_SOT_SMD:SOT-223Q3, Q4
2LM7805Package_TO_SOT_THT:TO-220-3_VerticalU1, U3
2M4Library_Emile:D_SMA_HandsolderingD8, D9
2OW4XConnector_RJ:RJ12_Amphenol_54601-x06_HorizontalJ12, J13
1+24VLibrary_Emile:TestPoint_Loop_D2.54mm_Drill1.5mm_BeadedTP1
1+3V3Library_Emile:TestPoint_Loop_D2.54mm_Drill1.5mm_BeadedTP4
1+5VELibrary_Emile:TestPoint_Loop_D2.54mm_Drill1.5mm_BeadedTP6
1+7VLibrary_Emile:TestPoint_Loop_D2.54mm_Drill1.5mm_BeadedTP2
1100KResistor_SMD:R_1206_3216MetricR24
115KResistor_SMD:R_1206_3216MetricR20
118KResistor_SMD:R_1206_3216MetricR25
11MResistor_SMD:R_1206_3216MetricR37
11V07TestPoint:TestPoint_Pad_D1.0mmTP15
1220KResistor_SMD:R_1206_3216MetricR18
1230V_OUTConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ8
124 MHzCrystal:Crystal_HC49-4H_VerticalY1
124V DC INLibrary_Emile:AK500_2J1
147KResistor_SMD:R_1206_3216MetricR16
147RResistor_SMD:R_1206_3216MetricR38
1820nCapacitor_SMD:C_1206_3216MetricC50
18K2Resistor_SMD:R_1206_3216MetricR12
1BC847Package_TO_SOT_SMD:SOT-23Q2
1BGLED_SMD:LED_1206_3216MetricD3
1BSS138Package_TO_SOT_SMD:SOT-23Q1
1BuzzerBuzzer_Beeper:Buzzer_12x9.5RM7.6BZ1
1DBGConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ20
1DSN5000Library_Emile:DSN5000_DCDC_CONVERTERPCB1
1FLOWSConnector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_VerticalJ21
1FP_LEDSConnector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_VerticalJ5
1FREE_IOConnector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_VerticalJ18
1GNDLibrary_Emile:TestPoint_Loop_D2.54mm_Drill1.5mm_BeadedTP5
1IRQLED_SMD:LED_1206_3216MetricD4
1LD1117V33Package_TO_SOT_THT:TO-220-3_VerticalU2
1LM35Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ7
1LM393Package_DIP:DIP-8_W7.62mmU10
1PHASE DETECTConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ14
1PWM24VConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ6
1RESETButton_Switch_THT:SW_Tactile_Straight_KSA0Axx1LFTRSW1
1SSR_ELE_HTRConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ9
1STM8S207R8Package_QFP:LQFP-64_10x10mm_P0.5mmU4
1Serial BusConnector_PinSocket_2.54mm:PinSocket_2x06_P2.54mm_VerticalJ2
1TD62783APackage_SO:SOIC-18W_7.5x11.6mm_P1.27mmU9
1THLTConnector_RJ:RJ12_Amphenol_54601-x06_HorizontalJ10
1TMLTConnector_RJ:RJ12_Amphenol_54601-x06_HorizontalJ11
1UARTConnector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ19
1V1Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ22
1V2Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ23
1V3Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ24
1V4Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ25
1V5Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ26
1V6Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ27
1V7Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ28
1V8Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ29
1VCCLibrary_Emile:TestPoint_Loop_D2.54mm_Drill1.5mm_BeadedTP3
1VcapTestPoint:TestPoint_Pad_D1.0mmTP8
1VrefTestPoint:TestPoint_Pad_D1.0mmTP7
1W5500_LiteLibrary_Emile:W55000_LiteJ4
1WATER LEVELConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ30
1Wiz550ioLibrary_Emile:WIZ550IOJ3
1bzTestPoint:TestPoint_Pad_D1.0mmTP13
1osciTestPoint:TestPoint_Pad_D1.0mmTP14
1scl1TestPoint:TestPoint_Pad_D1.0mmTP12

The 185 most common of 188 parts.

Similar boards

  • 2 layers90 × 58.5 mmSensactHsNano, the printed circuit board in 3D

    SensactHsNano

    klaus-liebler/sensact

    Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier…

    130 parts4Apache-2.0
  • 2 layers175 × 103 mmRnvm homer, the printed circuit board in 3D

    Rnvm homer

    kitspace-test-repos/kicad6-file-collection

    238 partsMIT
  • 2 layers100 × 80 mmPiMaster, the printed circuit board in 3D

    PiMaster

    M-o-a-T/moat-hardware

    Schematics and files for MoaT IoT things

    20 parts
  • 2 layers100 × 100 mmFlips15, the printed circuit board in 3D

    Flips15

    cawapy/FlipSuite

    KiCad schematics and PCB for building flip dot display drivers

    70 parts3
  • 2 layersFlipbits nano board, the printed circuit board in 3D

    Flipbits nano board

    bitfieldlabs/flipbits

    FlipBits pinbal EPROM programmer

    3 parts2LGPL-3.0
  • 2 layersProjeto modificado, the printed circuit board in 3D

    Projeto modificado

    luispaulomr/alr3000z_firmware

    Firmware for ALR3000z (development board based on PIC18F4550).

    68 parts

Questions

How big is the Brew HW stm8s207 PCB?

It measures 199.4 × 97.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Brew HW stm8s207 use?

188 parts, built around the STM8S207R8T6, DS2482-800, LM7805 and LD1117V33. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Brew HW stm8s207 KiCad files?

From the Emile666/Brew_Hardware_STM8S207 repository on GitHub, at the commit this page was made from: the board is brew_HW_stm8s207.kicad_pcb and its schematic brew_HW_stm8s207.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Brew HW stm8s207 design in my own project?

Its repository states no licence, so its author keeps all rights: ask Emile666 before reusing the design.