Skip to the content
A1A4A9A12B1B4B9B12SHSHSHSH

UBF31-0171

Mtconn Electronics

Part id
mtconn-electronics/UBF31-0171
Category
Uncategorised
Pins
20
Used on
7 open-source boards

Overview

The UBF31-0171 is an uncategorised made by Mtconn Electronics with 17 pins.

PCBKit's library has its KiCad symbol (USB-C_Mtconn_UBF31-0171:USB-C_Mtconn_UBF31-0171, from Antmicro) and its footprint (usb-c-receptacle-mtconn-ubf31-0171:USB-C_Receptacle_Mtconn_UBF31-0171, from Antmicro), ready for a KiCad board. 7 open-source boards in 7 repositories on GitHub use it.

Symbol

A1GNDA4VBUSA5CC1A6DA+A7DA-A8SBU1A9VBUSA12GNDB1GNDB4VBUSB5CC2B6DB+B7DB-B8SBU2B9VBUSB12GNDSHSH
USB-C_Mtconn_UBF31-0171:USB-C_Mtconn_UBF31-0171From Antmicro

Footprint

A1A4A9A12B1B4B9B12SHSHSHSH
usb-c-receptacle-mtconn-ubf31-0171:USB-C_Receptacle_Mtconn_UBF31-0171From Antmicro

Pinout

17
The pins of the UBF31-0171
PinNameType
A1GNDPower in
A4VBUSPower in
A5CC1Input/output
A6DA+Input/output
A7DA-Input/output
A8SBU1Input/output
A9VBUSPassive
A12GNDPassive
B1GNDPassive
B4VBUSPassive
B5CC2Input/output
B6DB+Input/output
B7DB-Input/output
B8SBU2Input/output
B9VBUSPassive
B12GNDPassive
SHSHPassive

Open-source boards using it

7
  • 4 layers21 × 17.8 mmXIAO ESP32 C6, the printed circuit board in 3D

    XIAO ESP32 C6

    MitkoDyakov/Calipatron

    I design my own digital caliper based on STM32F103C8T6 blue pill.

    83 parts47MIT
  • 4 layers21 × 17.8 mmXIAO ESP32C3, the printed circuit board in 3D

    XIAO ESP32C3

    bombarie/jaha-koo-eel

    A robotic remote controlled eel. A prop for the play Haribo Kimchi.

    68 parts1
  • 6 layers17.8 × 21.1 mmXIAO ESP32S3 PLUS V1.0 241025, the printed circuit board in 3D

    XIAO ESP32S3 PLUS V1.0 241025

    mikewen2024/Eyeliner

    A 1lb (antweight) melty-brain combat robot. A melty-brain spins the entire chassis at 1,000–2,000 RPM while pulsing drive motors 100 times/second to achieve controlled translational movement — maximum hitting power, and…

    71 parts1MIT
  • 4 layers21 × 17.8 mmXIAO ESP32C3 v1.3, the printed circuit board in 3D

    XIAO ESP32C3 v1.3

    jeffmc6767/Blare-clock

    This is my alarm clock with a display, buzzer and 4 buttons to customize it.

    68 parts
  • 4 layers30 × 30 mmReCamera B101 B4 Gyro v0.1, the printed circuit board in 3D

    ReCamera B101 B4 Gyro v0.1

    Seeed-Studio/OSHW-reCamera-Series

    reCamera is a series of open-source AI cameras.

    58 parts495Apache-2.0
  • 6 layers17.8 × 21.1 mmXIAO ESP32S3 Plus V1.1 250724, the printed circuit board in 3D

    XIAO ESP32S3 Plus V1.1 250724

    Josephrp/meshtonic

    Meshtonic H4M Companion — ESP32-S3 carrier for PortaPack H4M / Mayhem with multi-slot LoRa and standalone Meshtastic

    71 parts11
  • 2 layers17.8 × 21.1 mmESP32S3, the printed circuit board in 3D

    ESP32S3

    aram-ap/daredevil

    Computer Vision-Based Tactile Feedback for the Visually Impaired

    72 parts3MIT

Questions

Is there a KiCad symbol and footprint for the UBF31-0171?

Yes. The symbol is USB-C_Mtconn_UBF31-0171:USB-C_Mtconn_UBF31-0171 and the footprint usb-c-receptacle-mtconn-ubf31-0171:USB-C_Receptacle_Mtconn_UBF31-0171, both drawn on this page. PCBKit places them on a board for you when you design with it.

Where is the UBF31-0171 datasheet?

Mtconn Electronics publishes it: the Datasheet link on this page opens it.

Which open-source boards use the UBF31-0171?

7 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.