
MP9943GQ-Z
Monolithic Power SystemsExtended
-40℃~+125℃@(TJ) 1 200kHz~2.2MHz、410kHz 3A 4V~36V 500uA 800mV~28.5V Adjustable Buck Buck Built-in Yes QFN-8(3x3) DC-DC Converters ROHS
- Part id
- mps/MP9943GQ-Z
- Category
- DC DC Converters
- Package
- QFN-8(3x3)
- Pins
- 8
- In stock
- 10,426 at JLCPCB (C477821)
- Used on
- 11 open-source boards
Overview
The MP9943GQ-Z is a DC DC Converter made by Monolithic Power Systems in a QFN-8(3x3) package with 8 pins. -40℃~+125℃@(TJ) 1 200kHz~2.2MHz、410kHz 3A 4V~36V 500uA 800mV~28.5V Adjustable Buck Buck Built-in Yes QFN-8(3x3) DC-DC Converters ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MP4423AGQ-Z, from EasyEDA) and its footprint (EasyEDA_Cloud:QFN-8_L3.0-W3.0-P0.65-BL, from EasyEDA), ready for a KiCad board. 10,426 are in stock at JLCPCB (part C477821). 11 open-source boards in 10 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
11- Supply, least
- 4 V · VIN, recommended operating minimum · p. 3
- Supply, most
- 36 V · VIN, recommended operating maximum · p. 3
- Supply, absolute maximum
- 40 V · VIN, absolute maximum · p. 3
- Junction, hottest
- 150 °C · Junction temperature absolute maximum · p. 3
- Takes working
- 500 µA · VIN quiescent current typical, VEN = 2V, VFB = 1V · p. 4
- Takes asleep
- 8 µA · VIN shutdown current max, VEN = 0V · p. 4
- Current limit
- 4.4 A · Current limit typical, under 40% duty cycle · p. 4
- Feedback reference
- 792 mV · Feedback voltage typical · p. 4
- Switches at
- 410 kHz · Oscillator frequency typical, VFB = 750mV · p. 4
- Junction to air (QFN-8 (3mmx3mm))
- 55 K/W · Junction-to-ambient, JESD51-7 four-layer PCB · p. 3
- Junction to case (QFN-8 (3mmx3mm))
- 13 K/W · Junction-to-case, JESD51-7 four-layer PCB · p. 3
What it is and has
6- Switching frequency
- 410kHz · p. 1
- Operation
- High-efficiency synchronous mode · p. 1
- Power saving
- Internal power-save mode · p. 1
- Soft-start
- Internal · p. 1
- Protection
- Thermal shutdown · p. 1
- Output adjustment
- From 0.8V · p. 1
Around it
9- cap 0.1μF-to-0.22μF
- between VCC and GND; Bias-supply decoupling; do not exceed 0.22uF. Place close to VCC and GND. · p. 10
- res 20Ω
- between SW and BST capacitor; Series resistor strongly recommended to reduce SW spike voltage. · p. 10
- res 100kΩ
- between PG and VCC or other voltage source; Example pull-up resistance for the open-drain power-good output. · p. 13
- res 41.2kΩ
- between VOUT and FB; R7 for the basic feedback divider; calculate R8 for the desired output voltage. · p. 15
- ind 1µH-to-10µH
- between SW and VOUT; For most applications; DC current rating at least 25% above maximum load current and low DC resistance recommended. · p. 15
- cap 22µF
- between IN and GND; Ceramic input capacitor for most applications; X5R or X7R recommended. · p. 16
- cap 1µF
- between IN and GND; Additional small-package input bypass capacitor, such as 0603; place as close to IN and GND as possible. · p. 16
- cap 0.1µF to 1μF
- between BST and SW; Bootstrap capacitor; a 20Ω series resistor is recommended. · p. 17
- diode 1N4148
- between VCC or VOUT and BST; Optional external bootstrap diode when bootstrap voltage is insufficient, especially below 5V input or at high duty cycle with 3.3V or 5V output. · p. 17
Specifications
39| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| VIN VIN | Room temperature unless otherwise noted | min -0.3 · max 40 V | 3 |
| VSW VSW | Room temperature unless otherwise noted | min -0.3 · max 41 V | 3 |
| All Other Pins | EN/SYNC absolute maximum details referenced to page 12 | min -0.3 · max 6 V | 3 |
| Continuous Power Dissipation | QFN-8 (3mmx3mm), TA = +25°C | max 2.27 W | 3 |
| Junction Temperature | max 150 °C | 3 | |
| Lead Temperature | max 260 °C | 3 | |
| Storage Temperature | min -65 · max 150 °C | 3 | |
| Continuous Supply Voltage VIN VIN | min 4 · max 36 V | 3 | |
| Output Voltage VOUT VOUT | Maximum DMaxхVIN | min 0.8 V | 3 |
| Operating Junction Temp (TJ) TJ | min -40 · max 125 °C | 3 | |
| θJA θJA | QFN-8 (3mmx3mm); measured on JESD51-7, 4-layer PCB | typ 55 °C/W | 3 |
| θJC θJC | QFN-8 (3mmx3mm); measured on JESD51-7, 4-layer PCB | typ 13 °C/W | 3 |
| Supply Current (Shutdown) ISHDN | VIN = 12V, TJ = +25°C, VEN = 0V | max 8 uA | 4 |
| Supply Current (Quiescent) IQ | VIN = 12V, TJ = +25°C, VEN = 2V, VFB = 1V | typ 0.5 · max 0.7 mA | 4 |
| HS Switch-ON Resistance RON_HS | VIN = 12V, TJ = +25°C, VBST-SW=5V | typ 85 · max 105 mΩ | 4 |
| LS Switch-ON Resistance RON_LS | VIN = 12V, TJ = +25°C, VCC =5V | typ 55 · max 75 mΩ | 4 |
| Switch Leakage ILKG_SW | VIN = 12V, TJ = +25°C, VEN = 0V, VSW =12V | max 1 uA | 4 |
| Current Limit ILIMIT | VIN = 12V, TJ = +25°C, Under 40% Duty Cycle | min 3.2 · typ 4.4 · max 5.5 A | 4 |
| Oscillator Frequency fSW | VIN = 12V, TJ = +25°C, VFB=750mV | min 320 · typ 410 · max 500 kHz | 4 |
| Fold-Back Frequency fFB | VIN = 12V, TJ = +25°C, VFB<400mV | min 70 · typ 100 · max 130 kHz | 4 |
| Maximum Duty Cycle DMAX | VIN = 12V, TJ = +25°C, VFB=750mV, 410kHz | min 92 · typ 95 % | 4 |
| Minimum ON Time(6) tON_MIN | VIN = 12V, TJ = +25°C | typ 70 ns | 4 |
| Sync Frequency Range fSYNC | VIN = 12V, TJ = +25°C | min 0.2 · max 2.4 MHz | 4 |
| Feedback Voltage VFB | VIN = 12V, TJ = +25°C | min 778 · typ 792 · max 806 mV | 4 |
| Feedback Current IFB | VIN = 12V, TJ = +25°C, VFB=820mV | typ 10 · max 100 nA | 4 |
| EN Rising Threshold VEN_RISING | VIN = 12V, TJ = +25°C | min 1.15 · typ 1.4 · max 1.65 V | 4 |
| EN Falling Threshold VEN_FALLING | VIN = 12V, TJ = +25°C | min 1.05 · typ 1.25 · max 1.45 V | 4 |
| EN Threshold Hysteresis VEN_HYS | VIN = 12V, TJ = +25°C | typ 150 mV | 4 |
| EN Input Current IEN | VIN = 12V, TJ = +25°C, VEN=2V | typ 4 · max 6 uA | 4 |
| EN Input Current IEN | VIN = 12V, TJ = +25°C, VEN=0 | typ 0 · max 0.2 uA | 4 |
| VIN Under-Voltage Lockout Threshold-Rising INUVRISING | VIN = 12V, TJ = +25°C | min 3.3 · typ 3.5 · max 3.7 V | 4 |
| VIN Under-Voltage Lockout Threshold-Falling INUVFALLING | VIN = 12V, TJ = +25°C | min 3.1 · typ 3.3 · max 3.5 V | 4 |
| VIN Under-Voltage Lockout Threshold-Hysteresis INUVHYS | VIN = 12V, TJ = +25°C | typ 200 mV | 4 |
| VCC Regulator VCC | VIN = 12V, TJ = +25°C, ICC=0mA | min 4.6 · typ 4.9 · max 5.2 V | 4 |
| VCC Load Regulation | VIN = 12V, TJ = +25°C, ICC=5mA | typ 1.5 · max 4 % | 4 |
| Thermal Shutdown (6) TSD | VIN = 12V | min 150 · typ 170 °C | 4 |
| Thermal Hysteresis (6) TSD_HYS | VIN = 12V | typ 30 °C | 4 |
| PG Rising Threshold PGVth_RISING | VIN = 12V, TJ = +25°C, as percentage of VFB | min 86 · typ 90 · max 94 % | 4 |
| PG Falling Threshold PGVth FALLING | VIN = 12V, TJ = +25°C, as percentage of VFB | min 80 · typ 84 · max 88 % | 4 |
Pins, by the datasheet
8- 1 FB
- Feedback input; connect to an output-to-GND resistor divider to set output voltage. Frequency fold-back acts below 660mV during short circuits. · p. 10
- 2 VCC
- Bias supply; decouple with 0.1uF to 0.22uF, not exceeding 0.22uF. · p. 10
- 3 EN/SYNC
- Drive high to enable; apply an external clock to change switching frequency. · p. 10
- 4 BST
- Bootstrap supply for the high-side driver; connect a capacitor to SW, with a recommended 20Ω series resistor. · p. 10
- 5 GND
- System ground and regulated-output reference; connect to ground with copper traces and vias. · p. 10
- 6 SW
- Switch output; connect with a wide PCB trace. · p. 10
- 7 IN
- 4V to 36V supply input; decouple with C1 and connect using a wide PCB trace. · p. 10
- 8 PG
- Power-good output; goes high when output voltage exceeds 90% of nominal. · p. 10
Ordering codes, by the datasheet
2- MP9943GQ
- QFN-8 (3mmх3mm) · Base order code; add –Z for tape and reel. · p. 2
- MP9943GQ–Z
- QFN-8 (3mmх3mm) · Tape and reel. · p. 2
- 6 layers36 × 36 mm

- 4 layers76.2 × 50.8 mm

- 6 layers50 × 50 mm

- 2 layers14.1 × 9.9 mm

- 4 layers50 × 45 mm

FC H743
CosShin/FC_AniH743
Trái tim của bo mạch là vi điều khiển STM32H743VIH6 (ARM Cortex-M7 @ 480 MHz), kết hợp cụm cảm biến quán tính kép Dual Bosch BMI088 độc lập chống rung cơ học, cảm biến khí áp độ chính xác cao SPL06-001, bộ nhớ lưu trữ…
136 partsMIT - 4 layers41.5 × 41.5 mm

ZenFly F71
LongDo1902/STM32_Drone
Developing quadcopter from scratch including stm32 programing and self-built flight controller PCB.
180 parts - 2 layers30 × 45.5 mm

- 6 layers43.6 × 43 mm

VENDETTAFC
Caped-Crussader/VENDETTAFC
A fully open-source, custom-designed 4-in-1 ESC and F7 Flight Controller stack for FPV multirotors, designed from scratch in KiCad.
191 parts31CERN-OHL-S-2.0
Parts like it
2MPQ4423HGQ-P
QFN-8(3x3)-40℃~+125℃@(TJ) 1 3A 410kHz 4V~36V 800mV~32.4V Adjustable Buck Buck Built-in Yes QFN-8(3x3) DC-DC Converters ROHSMonolithic Power SystemsDC-DC ConvertersMPQ4423GQ-Z
QFN-8(3x3)-40℃~+125℃@(TJ) 1 3A 410kHz 4V~30V Adjustable Buck Buck Built-in Yes QFN-8(3x3) DC-DC Converters ROHSMonolithic Power SystemsDC-DC Converters
Questions
Is there a KiCad symbol and footprint for the MP9943GQ-Z?
Yes. The symbol is EasyEDA_Cloud:MP4423AGQ-Z and the footprint EasyEDA_Cloud:QFN-8_L3.0-W3.0-P0.65-BL, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the MP9943GQ-Z?
QFN-8(3x3), with 8 pins. Its footprint is drawn on this page.
Where is the MP9943GQ-Z datasheet?
Monolithic Power Systems publishes it: the Datasheet link on this page opens it.
Where can I order the MP9943GQ-Z?
JLCPCB lists it as part C477821, with 10,426 in stock; the sellers' links on this page open their listings.
What can replace the MP9943GQ-Z?
Parts like it in the library: the MPQ4423HGQ-P by Monolithic Power Systems and the MPQ4423GQ-Z by Monolithic Power Systems. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the MP9943GQ-Z?
11 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.