Skip to the content

MA732GQ-Z

Monolithic Power SystemsExtended

-40℃~+125℃ 11.7mA 3V~3.6V 3mm 3mm Magnetic position sensor No SPI、SSI 可编程传输、零位编程、故障诊断、多轴磁场检测、信号滤波处理 QFN-16(3x3) Position Sensors ROHS

Part id
mps/MA732GQ-Z
Category
Position Sensors
Package
QFN-16(3x3)
Pins
17
In stock
4,874 at JLCPCB (C3824836)
Used on
9 open-source boards

Overview

The MA732GQ-Z is a position Sensor made by Monolithic Power Systems in a QFN-16(3x3) package with 17 pins. -40℃~+125℃ 11.7mA 3V~3.6V 3mm 3mm Magnetic position sensor No SPI、SSI 可编程传输、零位编程、故障诊断、多轴磁场检测、信号滤波处理 QFN-16(3x3) Position Sensors ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MA732GQ-Z, from EasyEDA) and its footprint (EasyEDA_Cloud:QFN-16_L3.0-W3.0-P0.50-TL-EP1.7, from EasyEDA), ready for a KiCad board. 4,874 are in stock at JLCPCB (part C3824836). 9 open-source boards in 7 repositories on GitHub use it.

Symbol

1SSD2A3Z4MOSI5CS6B7MISO8GND9PWM10TEST11MGL12SCLK13VDD14NC15SSCK16MGH17PAD
EasyEDA_Cloud:MA732GQ-ZFrom EasyEDA

Footprint

EasyEDA_Cloud:QFN-16_L3.0-W3.0-P0.50-TL-EP1.7From EasyEDA

Pinout

17
The pins of the MA732GQ-Z
PinNameType
1SSDUnspecified
2AUnspecified
3ZUnspecified
4MOSIUnspecified
5CSUnspecified
6BUnspecified
7MISOUnspecified
8GNDUnspecified
9PWMUnspecified
10TESTUnspecified
11MGLUnspecified
12SCLKUnspecified
13VDDUnspecified
14NCUnspecified
15SSCKUnspecified
16MGHUnspecified
17PADUnspecified

Open-source boards using it

9See all 9
  • 4 layers27 × 27 mmO32controller, the printed circuit board in 3D

    O32controller

    qwertpas/O32controller

    Miniature closed-loop controller for brushless DC motors

    126 parts37MIT
  • 2 layers19 × 19 mmMA732-Breakout, the printed circuit board in 3D

    MA732-Breakout

    alperbasarn/MA732-Breakout

    Breakout board for MA732 magnetic encoder

    7 parts
  • 4 layers71.8 × 70.7 mmDashMotor48V, the printed circuit board in 3D

    DashMotor48V

    ishaansalian/dash-motor-controller

    Motor control PCB for the Dash humanoid robot project.

    79 parts
  • 6 layers72 × 69.5 mmDashMotor48V, the printed circuit board in 3D

    DashMotor48V

    ShangqunYu/Dash48V

    48v version motor controller board

    108 parts
  • 4 layers17.4 × 43.2 mmAmulet encoder, the printed circuit board in 3D

    Amulet encoder

    EPFLXplore/XRE_LeggedRobot_HW

    PCB designs for Xplore Research's robot dog project

    47 parts348Apache-2.0
  • 6 layers35 × 50 mmPower stage rev8, the printed circuit board in 3D

    Power stage rev8

    oresat/oresat-adcs-hardware

    Controller PCB for OreSat reaction wheels, magnetorquers, IMU, and magnetometers

    239 parts21GPL-2.0
  • 6 layers72 × 69.5 mmDashMotor48V, the printed circuit board in 3D

    DashMotor48V

    ShangqunYu/Dash48V

    48v version motor controller board

    107 parts

Parts like it

1

Questions

Is there a KiCad symbol and footprint for the MA732GQ-Z?

Yes. The symbol is EasyEDA_Cloud:MA732GQ-Z and the footprint EasyEDA_Cloud:QFN-16_L3.0-W3.0-P0.50-TL-EP1.7, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MA732GQ-Z?

QFN-16(3x3), with 17 pins. Its footprint is drawn on this page.

Where is the MA732GQ-Z datasheet?

Monolithic Power Systems publishes it: the Datasheet link on this page opens it.

Where can I order the MA732GQ-Z?

JLCPCB lists it as part C3824836, with 4,874 in stock; the sellers' links on this page open their listings.

What can replace the MA732GQ-Z?

Parts like it in the library: the MA702GQ-Z by Monolithic Power Systems. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MA732GQ-Z?

9 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.