
Pino rs
timblakely/pino-rs
Bare-metal BLDC controller for Pino the robot, written in Rust.
Monolithic Power SystemsExtended
-40℃~+125℃ 11.7mA 3.3V 3mm 3mm Magnetic position sensor No SPI QFN-16(3x3) Position Sensors ROHS
The MA702GQ-Z is a position Sensor made by Monolithic Power Systems in a QFN-16(3x3) package with 17 pins. -40℃~+125℃ 11.7mA 3.3V 3mm 3mm Magnetic position sensor No SPI QFN-16(3x3) Position Sensors ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MAQ473GQE-AEC1-P, from EasyEDA) and its footprint (EasyEDA_Cloud:QFN-16_L3.0-W3.0-P0.50-TL-EP1.7, from EasyEDA), ready for a KiCad board. 1,215 are in stock at JLCPCB (part C3824726). 1 open-source board in 1 repository on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | SSD | Unspecified |
| 2 | A | Unspecified |
| 3 | Z | Unspecified |
| 4 | MOSI | Unspecified |
| 5 | CS | Unspecified |
| 6 | B | Unspecified |
| 7 | MISO | Unspecified |
| 8 | GND | Unspecified |
| 9 | PWM | Unspecified |
| 10 | TEST | Unspecified |
| 11 | MGL | Unspecified |
| 12 | SCLK | Unspecified |
| 13 | VDD | Unspecified |
| 14 | NC | Unspecified |
| 15 | SSCK | Unspecified |
| 16 | MGH | Unspecified |
| 17 | EP | Unspecified |

timblakely/pino-rs
Bare-metal BLDC controller for Pino the robot, written in Rust.
Yes. The symbol is EasyEDA_Cloud:MAQ473GQE-AEC1-P and the footprint EasyEDA_Cloud:QFN-16_L3.0-W3.0-P0.50-TL-EP1.7, both drawn on this page. PCBKit places them on a board for you when you design with it.
QFN-16(3x3), with 17 pins. Its footprint is drawn on this page.
Monolithic Power Systems publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C3824726, with 1,215 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the MA732GQ-Z by Monolithic Power Systems. Check their datasheets: a part that fits the footprint may still differ in its ratings.
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.