Skip to the content
123

IRFP250N

MinosExtended

-55℃~+150℃ 1 N-channel 101pF 104W 2.8nF 200V 30A 355pF 4V 80mΩ@10V N-Channel TO-247 MOSFETs ROHS

Part id
minos/IRFP250N
Category
MOSFETs
Package
TO-247
Pins
3
In stock
485 at JLCPCB (C20624228)
Used on
6 open-source boards

Overview

The IRFP250N is a MOSFET made by Minos in a TO-247 package with 3 pins. -55℃~+150℃ 1 N-channel 101pF 104W 2.8nF 200V 30A 355pF 4V 80mΩ@10V N-Channel TO-247 MOSFETs ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Q_NMOS_1G_2D_3S, from PCBKit's generic symbols) and its footprint (EasyEDA_Cloud:TO-247-3_L15.9-W5.0-P5.44-L, from EasyEDA), ready for a KiCad board. 485 are in stock at JLCPCB (part C20624228). 6 open-source boards in 6 repositories on GitHub use it.

Symbol

Pinmap_Generic:Q_NMOS_1G_2D_3SFrom PCBKit's generic symbols

Footprint

123
EasyEDA_Cloud:TO-247-3_L15.9-W5.0-P5.44-LFrom EasyEDA

Pinout

3
The pins of the IRFP250N
PinNameType
1GInput
2DPassive
3SPassive

Open-source boards using it

6
  • 2 layers98.5 × 75.5 mmZvs napajanje, the printed circuit board in 3D

    Zvs napajanje

    domtomic/ZVSsupply

    ZVS high voltage supply schematic and PCB layout project

    22 parts1MIT
  • 2 layersAmpli Test, the printed circuit board in 3D

    Ampli Test

    andreadebortoli01/Irs2092S-Full-bridge

    High-power 3 kW audio amplifier board based on 2 × IRS2092S drivers configured in a Full-Bridge (BTL) topology.

    4 parts
  • 2 layers200 × 100 mmArduinoNanoDcLoad, the printed circuit board in 3D

    ArduinoNanoDcLoad

    apex-/electronicDcLoad

    A simple DC Electronic Load using an Arduino Nano (0-50V/0-5A)

    49 parts
  • 2 layers66 × 73.7 mmZVS, the printed circuit board in 3D

    ZVS

    gongminmin/Railgun

    A simple design of railgun

    18 parts9MIT
  • 2 layers275 × 185 mmDogrudan sdr D, the printed circuit board in 3D

    Dogrudan sdr D

    kocer/direct-sampling-sdr

    Direct-sampling SDR transceiver with four phase-coherent channels, and a class-A power amplifier for 1.8 to 54 MHz.

    265 parts1
  • 2 layers110.1 × 68.8 mmEHVGenerator, the printed circuit board in 3D

    EHVGenerator

    Firestorm108/Bipolar-EHV-Generator

    An extreme high voltage generator that utilizes a bipolar setup to effectively create a 300kV+ voltage difference.

    20 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the IRFP250N?

Yes. The symbol is Pinmap_Generic:Q_NMOS_1G_2D_3S and the footprint EasyEDA_Cloud:TO-247-3_L15.9-W5.0-P5.44-L, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the IRFP250N?

TO-247, with 3 pins. Its footprint is drawn on this page.

Where is the IRFP250N datasheet?

Minos publishes it: the Datasheet link on this page opens it.

Where can I order the IRFP250N?

JLCPCB lists it as part C20624228, with 485 in stock; the sellers' links on this page open their listings.

What can replace the IRFP250N?

Parts like it in the library: the IRFP260N by Minos, the ASW65R120EFD by ANHI, the IRFP250NPBF-JSM by JSMSEMI and the WGA30N50SE by Wild Goose. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the IRFP250N?

6 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.