6 layers164 × 234 mm
2 layers98.5 × 75.5 mm
Zvs napajanje
domtomic/ZVSsupply1ZVS high voltage supply schematic and PCB layout project
- Size
- 98.5 × 75.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 8
- Pads
- 39
- Tracks, vias
- 61, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 3 Aug 2019
- Updated
- 9 Aug 2019
Overview
Zvs napajanje is an open-source printed circuit board by domtomic, from the domtomic/ZVSsupply repository on GitHub, published under the MIT licence. It is a 2-layer board of 98.5 × 75.5 mm with 22 parts on 8 nets, routed with 61 tracks and 0 vias.
It is built around the IRFP250N and MUR1560G. Its parts include 6 connectors, 4 capacitors, 4 resistors, 4 diodes and 2 transistors.
Main components
2README
README.mdZVSsupply
ZVS high voltage supply schematic and PCB layout project
Jumper needed to connect two Drain electrodes All circuit is on back copper
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 470u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1, C3, C4 |
| 3 | Conn_01x01_Female | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J2, J3, J4 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4 |
| 2 | 1N5349-12V | Diode_THT:D_DO-15_P10.16mm_Horizontal | D3, D4 |
| 2 | 470 | Resistor_THT:R_Axial_DIN0516_L15.5mm_D5.0mm_P30.48mm_Horizontal | R1, R2 |
| 2 | IRFP250 | Package_TO_SOT_THT:TO-247-3_Vertical | Q1, Q2 |
| 2 | MUR1560G | Package_TO_SOT_THT:TO-220-2_Vertical | D1, D2 |
| 2 | VEE_JUMPER | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J5, J6 |
| 1 | 0.68u | Capacitor_THT:C_Rect_L33.0mm_W15.0mm_P27.50mm_MKS4 | C2 |
| 1 | 100u | Ljuta zavojnica ZVS:zvsojnica | L1 |
| 1 | LOGO | ZVSsupply:ICM_logo | G*** |
| 1 | ulaz | Connector_Wire:SolderWirePad_1x02_P5.08mm_Drill1.5mm | J1 |
Similar boards
- 2 layers
Ampli Test
andreadebortoli01/Irs2092S-Full-bridge
High-power 3 kW audio amplifier board based on 2 × IRS2092S drivers configured in a Full-Bridge (BTL) topology.
4 parts - 2 layers200 × 100 mm
ArduinoNanoDcLoad
apex-/electronicDcLoad
A simple DC Electronic Load using an Arduino Nano (0-50V/0-5A)
49 parts - 2 layers66 × 73.7 mm
- 2 layers275 × 185 mm
Dogrudan sdr D
kocer/direct-sampling-sdr
Direct-sampling SDR transceiver with four phase-coherent channels, and a class-A power amplifier for 1.8 to 54 MHz.
265 parts1 - 2 layers110.1 × 68.8 mm
EHVGenerator
Firestorm108/Bipolar-EHV-Generator
An extreme high voltage generator that utilizes a bipolar setup to effectively create a 300kV+ voltage difference.
20 parts - 2 layers158 × 11 mm
Daylight Matchstick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
22 parts1.1kGPL-3.0 - 2 layers57 × 65 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
22 parts1kGPL-3.0
Questions
How big is the Zvs napajanje PCB?
It measures 98.5 × 75.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Zvs napajanje use?
22 parts, built around the IRFP250N and MUR1560G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Zvs napajanje KiCad files?
From the domtomic/ZVSsupply repository on GitHub, at the commit this page was made from: the board is zvs_napajanje.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Zvs napajanje design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).