Skip to the content
123

IRFB4110

MinosExtended

Part id
minos/IRFB4110
Category
MOSFETs
Package
TO-220
Pins
3
In stock
138 at JLCPCB (C19189954)
Used on
6 open-source boards

Overview

The IRFB4110 is a MOSFET made by Minos in a TO-220 package with 3 pins.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:AP6N03SI, from EasyEDA) and its footprint (EasyEDA_Cloud:TO-220-3_L10.0-W4.6-P2.54-L, from EasyEDA), ready for a KiCad board. 138 are in stock at JLCPCB (part C19189954). 6 open-source boards in 6 repositories on GitHub use it.

Symbol

3S1G2D
EasyEDA_Cloud:AP6N03SIFrom EasyEDA

Footprint

123
EasyEDA_Cloud:TO-220-3_L10.0-W4.6-P2.54-LFrom EasyEDA

Pinout

3
The pins of the IRFB4110
PinNameType
1GUnspecified
2DUnspecified
3SUnspecified

Open-source boards using it

6
  • 2 layers230.1 × 118.5 mmPOWER 0-50, the printed circuit board in 3D

    POWER 0-50

    Aleksei327/STM32G474-Precision-Lab-Power-Supply

    Precision 0–50 V programmable laboratory PSU with 1 mV/1 mA setting steps, hybrid synchronous-buck + linear regulation, STM32G474 control, INA228 metering, and layered hardware protection.

    207 parts4
  • 2 layers177 × 91.6 mmPower Charg AUTO 12V C, the printed circuit board in 3D

    Power Charg AUTO 12V C

    Aleksei327/STM32G474-Power-Charger

    Experimental STM32G474-based high-current battery charger and programmable synchronous buck converter. KiCad hardware and STM32CubeIDE firmware.

    160 parts3
  • 2 layers40 × 60 mmScaner v1, the printed circuit board in 3D

    Scaner v1

    Aleksei327/ESP32-C5-OBD2-Scanner

    DIY dual-CAN OBD2 adapter on Seeed XIAO ESP32-C5 with a Flutter Android app. Working prototype, tested on a Citroën C3 II: full read-only ECU scan, PSA fault codes, live data. Single-sided home-etched KiCad board.

    34 parts2
  • 2 layers47 × 84 mmBQ76925 ATMEGA328P 6S 20A BMS, the printed circuit board in 3D

    BQ76925 ATMEGA328P 6S 20A BMS

    M-S-Ali/raven-i-sentinel

    6S - 24V - 20A Battery Management System (BMS) based on TI BQ76925 and Microchip Atmega328P.

    79 parts2
  • 2 layers160.3 × 50.8 mmAPortableInductionHeater, the printed circuit board in 3D

    APortableInductionHeater

    jdelouche/aPortableInductionHeater

    This is a hardware design that can be used to create a portable induction heater.

    27 parts1
  • 4 layers114.3 × 134.5 mmExoskeleton, the printed circuit board in 3D

    Exoskeleton

    Bihyungbetter/exoskeleton

    Exoskeleton is a powered lower-limb exoskeleton with six actuated joints — hip flexion, hip abduction, and knee flexion per leg.

    60 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the IRFB4110?

Yes. The symbol is EasyEDA_Cloud:AP6N03SI and the footprint EasyEDA_Cloud:TO-220-3_L10.0-W4.6-P2.54-L, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the IRFB4110?

TO-220, with 3 pins. Its footprint is drawn on this page.

Where is the IRFB4110 datasheet?

Minos publishes it: the Datasheet link on this page opens it.

Where can I order the IRFB4110?

JLCPCB lists it as part C19189954, with 138 in stock; the sellers' links on this page open their listings.

What can replace the IRFB4110?

Parts like it in the library: the MPG180N10P by Minos, the AGM025N10C by AGM-Semi, the AGMH022N10C by AGM-Semi and the MPT028N10 by Minos. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the IRFB4110?

6 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.